Instruction/ maintenance manual of the product Genesis 6.1e Genesis I.C.E.
Go to page of 16
ver 1.0 1 1 absolute fidelity Owners Manual and Set - up Guide: Genesis 6.1e Loudspeaker Contents 1 A QUICK START SET - UP GUIDE 3 1.1 U NPACKING 3 1.2 R OOM P LACEMENT 3 1.3 C ONNECTIONS 4 1.4 A DJUSTMENTS 4 2 COMPLETE SET - UP GUID E 5 2.1 P OSITIONING 5 2.
ver 1.0 2 2 absolute fidelity A Message from Genesis Congratulations! You are now the owner of one of the finest l oudspeaker systems in the world. Based on technologies developed for our flagship Genesis 1 and the award - wining Genesis 6.1, the Genesis 6.
ver 1.0 3 3 absolute fidelity 1 A Quick Start Set - up Guide Now that you have your new Genesis 6.1e loudspeaker system, we realize that you can’t wait to hook it up and start playing! However, please read this quick set - up guide (even if your dealer is setting it up for you) before you proceed.
ver 1.0 4 4 absolute fidelity You will want to sit eight to twelve feet (2.4 to 4 me tres) away from the speakers. 18” 8’ to 10’ Toe in by 5 o 1.3 Connections For most applications, the speakers should be plugged directly into the output your power amplifiers using high quality speaker cables and the 5 - way binding posts.
ver 1.0 5 5 absolute fidelity 2 Complete Set - up Guide 2.1 Positioning A good starting posit ion for the G6. 1e is about 18 inches (0.45m) into the room, as measured from the front wall (the wall you look at as you are seated listening to the speakers), to the back of the base of the speaker.
ver 1.0 6 6 absolute fidelity 2.3 Loudspeaker Controls The two knobs at the top of the plate on the back of the speaker tailor the mid - and high - frequency response of the G6.
ver 1.0 7 7 absolute fidelity 3 Tuning the system Music is the best way to begin your set - up procedure. We suggest that video sources be used only after you have set - up the system to properly reproduce music. There is no “perfect” setting for the G6.
ver 1.0 8 8 absolute fidelity speaker enough) pull the speakers away from the front wall a little bit at a time. If you do not have them pulled far enough away, you may not have enough front to back depth. However, slightly more than 1/3 of the way into the room is about as far as you want to go.
ver 1.0 9 9 absolute fidelity 4 The Refinement stage After following the set - up guide above , you may not be completely satisfied with the results. We share with you here some of our observations in setting up these loudspeakers. 4.1 One Change at a Time One rule of thumb you should always keep in mind.
ver 1.0 10 10 absolute fidelity depth well behind the speaker, excellent focus of instruments and voices with proper vertical information and mid bass fill.
ver 1.0 11 11 absolute fidelity absorptive material or even a piece of furniture can help break up this point of first reflection. Rear wall. In many cases it will be unnecessary to do anything with the wall behind your listening position . However, you may want to experiment with diffusers or absorbers behind you for best sound.
ver 1.0 12 12 absolute fidelity 5 The Genesis 6.1e Technology 5.1 Dipolar Configuration What a lot of people don’t realize is that the room is as big (if not bigger), a part of their music system as is the loudspeakers.
ver 1.0 13 13 absolute fidelity rib bon/electrostatic designs, without the high distortion and poor dispersion that is typically associated with them. The G6.1e uses two of these tweeters per channel. One front - firing, and the other rear - firing wired to the crossover out of phase to the fron t tweeters, creating a dipole.
ver 1.0 14 14 absolute fidelity circuit. Out of this comes the “magic” that is a Genesis designed loudspeaker system. For example, by going the more expensive route of using several smaller capacitors in parallel instead of a single big one, transparency and musical ity were improved.
ver 1.0 15 15 absolute fidelity In some par ts of the cabinet where vibration would have been the greatest, two inches (52mm) of multi - layer bonded MDF was used to provide the damping, structural integrity, as well as a rigid platform for the drivers to be located.
ver 1.0 16 16 absolute fidelity 6 Specifications § Frequency Response: 48Hz to 36kHz, +/ - 3dB § Sensitivity: 89 dB 1 watt 1 meter § Min/Max Power (Tube): 75/500 watts per s ide § Min/Max Powe.
An important point after buying a device Genesis I.C.E. Genesis 6.1e (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genesis I.C.E. Genesis 6.1e yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genesis I.C.E. Genesis 6.1e - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genesis I.C.E. Genesis 6.1e you will learn all the available features of the product, as well as information on its operation. The information that you get Genesis I.C.E. Genesis 6.1e will certainly help you make a decision on the purchase.
If you already are a holder of Genesis I.C.E. Genesis 6.1e, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genesis I.C.E. Genesis 6.1e.
However, one of the most important roles played by the user manual is to help in solving problems with Genesis I.C.E. Genesis 6.1e. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genesis I.C.E. Genesis 6.1e along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
