Instruction/ maintenance manual of the product 0G2832 Generac Power Systems
Go to page of 68
2.4 SER VICE MANUAL Manual P art No. 0G2832 MITSUBISHI GAS ENGINE.
FOREWORD This manual has been published by GENERAC ® POWER SYSTEMS, INC. to aid our dealers’ mechanics, company service personnel and general con- sumers when servicing the products described herein.
This engine has been engineered f or use in Generac P ower Systems products. The contents of this manual ha v e been reprinted from the or iginal manuf acturer’ s ser vice and repair manual. SER VICE RECOMMENDA TIONS ................................
2.4 Liter Gas Engine Service Recommendations 2 ◆ ENGI NE OIL R EC OM MEN D A TIONS The unit has been filled with “break in ” engine oil at the factory . Use a high- quality detergent oil clas- sified “F or Service CC, SD , SE or SF .” Detergent oils keep the engine cleaner and reduce carbon deposits.
2.4 Liter Gas Engine Service Recommendations 3 8 KW - 35 KW SMALL ST AN DBY GENER A T OR SET S F ollowing is a recommended maintenance schedule for Generac small standby and residential generator sets from 8 kW to 35 kW in size, and applies to both diesel engine and gas engine driven units.
4 Liter Gas Engine Service Recommendations Maintenance T asks Level 1 Level 2 Level 3 Level 4 Recommended to be done monthly/ 10 hrs. T ask Comp. (Date- Initials) Required to be done 3 months/ Break -in /30 hrs. T ask Comp. (Date- Initials) Required to be done Semi- Annually/50 hrs.
5 2.4 Liter Gas Engine Service Recommendations Maintenance T asks Level 1 Level 2 Level 3 Level 4 Recommended to be done monthly/ 10 hrs. T ask Comp. (Date- Initials) Required to be done 3 months/ Break -in /30 hrs. T ask Comp. (Date- Initials) Required to be done Semi- Annually/50 hrs.
Notes.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
P .O. BOX 310 EAGLE, WI 53119 Part No. 0G2832 Revision * (07/14/06) Printed in U.S.A ..
An important point after buying a device Generac Power Systems 0G2832 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Generac Power Systems 0G2832 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Generac Power Systems 0G2832 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Generac Power Systems 0G2832 you will learn all the available features of the product, as well as information on its operation. The information that you get Generac Power Systems 0G2832 will certainly help you make a decision on the purchase.
If you already are a holder of Generac Power Systems 0G2832, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Generac Power Systems 0G2832.
However, one of the most important roles played by the user manual is to help in solving problems with Generac Power Systems 0G2832. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Generac Power Systems 0G2832 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
