Instruction/ maintenance manual of the product 7060B Genelec
Go to page of 8
Genelec 7060B, 7070A and 7071A Active Subwoofers Operating Manual LSE Series.
General description Genelec 7060B, 7070A and 7071A are pow- erful active subwoofers, incorporating all the amplifier and crossover electronics needed for bass management and reproduction in modern 6.1 or 5.1 channel surround sound or traditional stereo systems.
matrix surround decoder (Dolby Surround, Dolby Pro Logic) should not be connected to the "LFE IN" input. See section "Subwoofer in analogue matrix sound systems". SUM OUT : Use this output connector when you want to link another subwoofer to your system.
Figure 4. The effect of phase difference between the subwoofer and the main monitors Although the 7060B, 7070A and 7071A subwoofers are magnetically shielded, they may cause some picture distortion if placed near very sensitive video monitors or com- puter displays.
system it is necessary to temporarily connect either of the channels to this output. Power up the system and set the DIP switches 3 (SUM IN MODE) and 4 (LFE +10 dB) on the first switch group to "ON" Now you should hear an 85 Hz test signal from the subwoofer and the main monitor connected to the center channel output.
The LFE channel on the 7060B, 7070A and 7071A can be set to two frequency ranges: 19 to 85 Hz or 19 to 120 Hz by using the "LFE BANDWIDTH" switch.
Figure 9. The free field frequency response of the 7060B subwoofer at different Bass Roll-Off settings Maintenance No user serviceable parts are inside the ampli- fier unit.
AMPLIFIER SECTION INPUT SECTION CROSSOVER SECTION SYSTEM SPECIFICA TIONS 7060B 7070A 7071A Free field frequency response 19 Hz…85 Hz 19 Hz…85 Hz 19 Hz…85 Hz (+/- 3 dB) LFE 85/120 Hz LFE 85/120 H.
An important point after buying a device Genelec 7060B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genelec 7060B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genelec 7060B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genelec 7060B you will learn all the available features of the product, as well as information on its operation. The information that you get Genelec 7060B will certainly help you make a decision on the purchase.
If you already are a holder of Genelec 7060B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genelec 7060B.
However, one of the most important roles played by the user manual is to help in solving problems with Genelec 7060B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genelec 7060B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
