Instruction/ maintenance manual of the product XPM-3000 Gemini
Go to page of 9
(1) OPERA TIONS MANUAL BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL D’INSTRUCTIONS XPM-3000 POWER AMPLIFIER STEREO VERSTÄRKER AMPLIFICADOR DE PODER ESTEREO AMPLIFICA TEUR DE PUISSANCE STÉRÉOV.
(2) 11 7 12 13 6 14 15 8 9 10 20 22 23 21 1 2 3 4 5 8 9 10 18 16 17 19 11 7 12 13 6 14 15 1 2 3 4 5 18 16 17 18 16 17 120V 230V Gemini Sound Products Corp.
(3) 120V.
(4) 230V.
(5) Connections, Controls and Indicators Rear Panel Note: 120V and 230V units hav e dif ferent types of output connectors on the r ear panel. Input Section: There are two parallel input connectors (one female XLR and one 1/4” jack) per channel. Either can be used as an input or as a link to chain amplifiers.
(6) one connector touch the adjacent connector , the sound will be distorted, and your amplifier will overheat and go into protection mode. NOTE (120V only): Tw o subwoofer output connectors are provided to connect two subw oofers with se parate cables.
(7) 2. Connect the loudspeakers to the channel A and channel B SPEAKER OUTPUTS (8, 9) . THE TOT AL SPEAKER LOAD MUST BE A T LEAST 4 OHMS PER CHANNEL FOR CHANNELS A AND B. If you try to operate at a lower impedance, the amplifier will overheat and then go into protection mode and stop operation until you correct the load conditions.
(8) UNIT DOES NOT PRODUCE SOUND. POWER LED DOES NOT LIGHT . • POWER SWITCH NOT IN ON POSITION. • POWER CABLE NOT CONNECTED TO AMPLIFIER OR TO OUTLET . • AC OUTLET NOT ACTIVE. • MAIN AMPLIFIER FUSE DEFECTIVE. • MOVE POWER SWITCH TO ON POSITION.
(28) Worldwide Headquarters • 120 Clover Place, Edison, NJ 08837 • USA T el: (732) 738-9003 • Fax: (732) 738-9006 France • G.S.L. France • 1 1, Avenue Leon Harmel, Z.
An important point after buying a device Gemini XPM-3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gemini XPM-3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gemini XPM-3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gemini XPM-3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Gemini XPM-3000 will certainly help you make a decision on the purchase.
If you already are a holder of Gemini XPM-3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gemini XPM-3000.
However, one of the most important roles played by the user manual is to help in solving problems with Gemini XPM-3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gemini XPM-3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
