Instruction/ maintenance manual of the product GTB-HDKVM-ELR Gefen
Go to page of 19
HDKVM Extra Long Range Extender GTB-HDKVM-ELR GTB-HDKVM-ELR-BLK User Manual www .gefentoolbox.com Gefen.
ASKING FOR ASSIST ANCE Rev A1 T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday , Paci fi c T ime Write T o: Gefen, LLC. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Layout 5 Sender Unit Descriptions 6 Receiver Unit Layout 7 Receiver Unit Descriptions 8 Connecting the HDKVM Extra Long Range Extende.
1 Congratulations on your purchase of the GefenT oolBox HDKVM Extra Long Range Extender . Y our complete satisfaction is very important to us. About Gefen We specialize in total integration for your home theater , while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware.
2 OPERA TION NOTES PLEASE READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE HDKVM EXTRA LONG RANGE EXTENDER • CA T -5 or CA T -6 cables should not exceed 330 feet (100 meters). • Shielded (STP) CA T -5 or CA T -6 is recommended. However , un-shielded (UTP) CA T -5 or CA T -6 is acceptable.
3 FEA TURES Features • Supports 1080p Full HD and 3DTV at 330 feet (100 meters) • Extends USB 2.0 up to 330 feet (100 meters) • Supports USB 2.0 480 Mbps • Backward-compatible with USB 1.
4 SENDER UNIT LA YOUT Left Side Right Side To p 8 2 1 3 4 7 5 9 6.
5 1 USB LINK T ransmits the USB signals from the Sender Unit to the Receiver Unit using CA T -5e / CA T -6 cable. 2 LINK T ransmits the HDMI, Ethernet, and IR signals from the Sender Unit to the Receiver Unit using CA T -5e / CA T -6 cable. 3 ETH Connect a CA T -5 cable from a port on a local Ethernet switch to this jack.
6 RECEIVER UNIT LA YOUT Left Side Right Side To p 9 2 1 3 4 7 8 5 6 10.
7 RECEIVER UNIT DESCRIPTIONS 1 Ext IR Connect an IR Extender (Gefen part no. EXT -RMT -EXTIR) cable from this port to the Hi-Def source to extend the IR control.
8 CONNECTING THE HDKVM EXTRA LONG RANGE EXTENDER How to Connect the HDKVM Extra Long Range Extender 1. Connect the Hi-Def source to the Sender Unit using the included HDMI cable. 2. Use an HDMI cable to connect the Receiver Unit to an HDTV display . 3.
9 CONNECTING THE HDKVM EXTRA LONG RANGE EXTENDER Wiring Diagram for the HDKVM Extra Long Range Extender GTB-HDKVM-ELR CA T -5 LINK CABLE / ETHERNET (Up to 330 ft) HDMI CABLE Sender Router Router Recei.
10 DIP SWITCH CONFIGURA TION Receiver Unit The Gefen HDKVM Extra Long Range Extender contains four (4) DIP switches on the bottom of the Receiver Unit (the Sender Unit does not contain DIP switches). Each of these DIP switches performs a dif ferent function.
11 DIP SWITCH CONFIGURA TION Receiver Unit DIP Switch 2 - Hot Plug Detect (Default = OFF)* • ON - HPD Pass-Through HPD follows upstream HPD towards the source. The HPD signal will re fl ect the connection status between the display device and the source device.
12345678 Gefen recommends the TIA/EIA-568-B wiring option. Please adhere to the table below when fi eld terminating cable for use with Gefen products.
13 W ALL MOUNTING INSTRUCTIONS The GefenT oolBox HDKVM Extra Long Range Extender Sender Unit and Receiver Unit may be mounted vertically on a wall or in a cabinet with wood/ drywall screws as shown in the diagram above.
14 Maximum Pixel Clock................................................................................225 MHz Input Video Signal................................................................................1.2 V olts p-p Input DDC Signal............
W ARRANTY 15 Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years .
Rev A1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www .gefentoolbox.com support@gefentoolbox.com Pb This product uses UL listed power supplies.
An important point after buying a device Gefen GTB-HDKVM-ELR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen GTB-HDKVM-ELR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen GTB-HDKVM-ELR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen GTB-HDKVM-ELR you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen GTB-HDKVM-ELR will certainly help you make a decision on the purchase.
If you already are a holder of Gefen GTB-HDKVM-ELR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen GTB-HDKVM-ELR.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen GTB-HDKVM-ELR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen GTB-HDKVM-ELR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
