Instruction/ maintenance manual of the product GTB-HDFST-144 Gefen
Go to page of 19
www. ge f e n too lb o x. co m 1 : 4 Sp l itte r f o r H D MI ® w ith FS T G T B- H DFS T - 144 G T B- H DFS T - 144 -BLK Us e r Manual Gefen.
ASKING FOR ASSIST ANCE T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday Paci fi c T ime Write T o: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The GefenT oolBox 1:4 Splitter for HDMI with FST 7 EDID Management 7 Understanding E.
1 INTRODUCTION Congratulations on your purchase of the GefenT oolBox 1:4 Splitter for HDMI with FST . Y our complete satisfaction is very important to us. About Gefen We specialize in total integration for your home theater , while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware.
2 READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE GEFENTOOLBOX 1:4 SPLITTER FOR HDMI WITH FST • EDID contains the A/V capabilities of a display device in regards to video resolutions and audio formats supported. This information is used by the source device to determine the format of the A/V signal it outputs.
3 FEA TURES Supported HDMI 1.3 Features • 225 MHz (up to 12 bit YUV 444 @ 1080p) • Deep Color • Dolby T rueHD and DTS-HD Master Audio • Lip Sync General Features • Simultaneously displays a single Hi-Def source on up to four (4) HDTV displays without signal loss.
4 P ANEL LA YOUT 2 7 5 1 3 6 8 4.
5 1 HDMI Output Ports 1-4 Connect HDMI source devices to these ports. 2 Fast / Slow Switch Switches between Fast and Slow Switching. See page 12 for more information. 3 Audio Channel Selection Switch This switch will modify the EDID to specify the number of supported audio channels when using the INTERNAL EDID mode.
6 How to Connect the GefenT oolBox 1:4 Splitter for HDMI with FST 1. Use the supplied HDMI cable to connect the source device to the HDMI input port of the GefenT oolBox 1:4 Splitter for HDMI with FST . 2. Use additional user-supplied HDMI cables to connect up to four (4) HDTV displays to the output ports on the 1:4 Switcher for HDMI with FST .
Understanding EDID The GefenT oolBox 1:4 Splitter for HDMI with FST features automatic and manual EDID adjustments to maximize compatibility of all attached devices. First it is necessary to understand EDID and what it is used for . EDID. What is it and what is it used for? Under normal circumstances, analog (i.
8 EDID MANAGEMENT EDID Mode Selection 1. EXTERNAL MODE : T o use this mode, set the EDID Mode Switch on the front panel to the EXT position. In External EDID mode, the Splitter directly retrieves EDID.
9 EDID MANAGEMENT Audio Channel Selection The GefenT oolBox 1:4 Splitter for HDMI with FST features a switch that will modify the supported audio formats listed in the pre-programmed EDID. This feature is useful for limiting the output of the source device to either 2 or multi- channel audio formats.
10 EDID MANAGEMENT External EDID Management The 1:4 Splitter for HDMI with FST features EDID Management. Before the source can send video or audio signals to the display , the source devices reads the EDID (Extended Display Identi fi cation Data) of each device connected to an output.
11 EDID MANAGEMENT Internal EDID Speci fi cations The table below lists the settings that comprise the built-in Internal EDID data structure: Video Data Block Audio Data Block Speaker Allocation xvYC.
12 F AST SWITCHING TECHNOLOGY Fast Switching T echnology Fast Switching T echnology (FST) is a Gefen software implementation for HDMI 1.3 products. FST was created to improve the inherent lengthy HDMI authentication process, based on the HDMI and HDCP speci fi cations.
13 W ALL MOUNTING INSTRUCTIONS The GefenT oolBox 1:4 Splitter for HDMI with FST should be mounted vertically in a wall or cabinet with wood/drywall screws as shown in the diagram above.
14 SPECIFICA TIONS Single Link Bandwidth ............................................................................. 225 MHz Pixel Clock / Speed .................................................................................. 165 MHz Maximum Video Resolution .
15 W ARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years .
Rev B2 Pb 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www .gefen.com support@gefen.com This product uses UL listed power supplies.
An important point after buying a device Gefen GTB-HDFST-144 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen GTB-HDFST-144 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen GTB-HDFST-144 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen GTB-HDFST-144 you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen GTB-HDFST-144 will certainly help you make a decision on the purchase.
If you already are a holder of Gefen GTB-HDFST-144, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen GTB-HDFST-144.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen GTB-HDFST-144. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen GTB-HDFST-144 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
