Instruction/ maintenance manual of the product EXT-USB-MINI2 Gefen
Go to page of 17
www.gefen.com ® Mini USB-2 Extender EXT-USB-MINI2 USER’S MANUAL.
ASKING FOR ASSIST ANCE Rev A2 T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST Write T o: Gefen LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 6 Receiver Panel Layout 7 Receiver Panel Descriptions 8 Connecting And Operating The Mini USB-2 E.
1 Congratulations on your purchase of the Mini USB-2 Extender . Y our complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.
READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE MINI USB-2 EXTENDER • The Mini USB-2 Extender sender and receiver were designed to operate on USB type computers.
3 Features • Extends any USB 1.1 device up to 150 feet (45 meters) using CA T -5 cable • Requires no external power adapter • Contains internal USB hub • Provides support for any full-speed 12 Mb/s or low-speed 1.
4 Front Panel Back Panel 1 2 SENDER P ANEL LA YOUT.
5 1 USB T ype B Input This connector will accept a USB T ype B cable to connect to a USB host device (i.e. Computer). 2 RJ-45 Link Connector This connector will accept a CA T -5 UTP cable to link the sender and receiver units together .
6 Front Panel Back Panel 1 2 RECEIVER P ANEL LA YOUT.
7 1 USB T ype A Input This connector will accept a USB T ype A cable to connect to a USB peripheral device (i.e. Keyboard & Mouse). T wo USB peripherals can be connected at the same time. 2 RJ-45 Link Connector This connector will accept a CA T -5 UTP cable to link the sender and receiver units together .
8 How to Connect the Mini USB-2 Extender 1. Connect the USB host device to the USB T ype B port on the Mini USB-2 Extender Sender unit using a user supplied USB T ype A-B cable. 2. Connect the sender and receiver units together using a CA T -5 UTP cable.
12345678 Gefen has speci fi cally engineered their products to work with the TIA/EIA-568-B speci fi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance.
10 TROUBLESHOOTING Symptoms/Cause Remedy All LEDs on the Sender are off. Cause: The Sender unit is not receiving power from the computer 1. Ensure that the Sender unit is connected to a USB port on the computer 2. Check that the computer is switched on and that the OS is running (not in Sleep mode).
11 TROUBLESHOOTING Symptom/Cause Remedies All LEDs on both Sender and Receiver are on but the device does not operate correctly Cause: a) The USB device is malfunctioning. b) The computer does not recognise the USB device. c) The extender is malfunctioning.
12 USB device support .............................. Full-Speed 12 Mbs / Low-Speed 1.5 Mbs USB Input Connectors ................................................................................ T ype B USB Output Connectors ............................
13.
*EXT-ma-USB-MINI2* Rev A2 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.co m support@gefen.co m Pb.
An important point after buying a device Gefen EXT-USB-MINI2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen EXT-USB-MINI2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen EXT-USB-MINI2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen EXT-USB-MINI2 you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen EXT-USB-MINI2 will certainly help you make a decision on the purchase.
If you already are a holder of Gefen EXT-USB-MINI2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen EXT-USB-MINI2.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen EXT-USB-MINI2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen EXT-USB-MINI2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
