Instruction/ maintenance manual of the product DL Gefen
Go to page of 12
2x1 DVI KVM DL Switcher USER MANUAL www.gefen.com.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday through Friday . Write T o: Gefen Inc.
T ABLE OF CONTENTS Introduction Features Panel Desciptions Connecting and Operating the DL Switcher Operation Notes RMT2-IR Installation IR Code Con fl icts / IR Extender Installation Speci fi catio.
Congratulations on your purchase of the Gefen 2x1 DVI DL Switcher . Y our complete satisfaction is very important to us. Gefen’s line of KVM (Keyboard V ideo & Mouse), DVI, USB, switches, extenders, con- verters and hubs is designed to make computer use more comfortable, more productive and less expensive.
FEA TURES Features • Saves money on hardware costs • Saves space on your desktop • Save time and increase your productivity • Maintains highest 3840 x 2400 x 60Hz resolution video • No loss .
P ANEL DESCRIPTIONS 3 Power Indicator Infrared Eyes Selecter Indicates which input is selected Audio In 1 Audio In 2 Audio Out Contact Closure Interface - Connects to optional wired RMT -2 remote cont.
CONNECTING AND OPERA TING THE 2x1 DVI DL SWITCHER How to Connect the DL Switcher to your devices 1- Connect the supplied cables from your fi rst computer into the DVI In 1, USB In 1, and Audio In 1 connection in the back of the DVI Switcher .
2x1 DVI DL OPERA TION NOTES 5 Operation Notes When turning on or rebooting your computers, the DVI DL Switcher must be selected to the computer that is booting until the computer completes the boot cycle. This step can be eliminated using the Gefen DVI Detective, which stores the displays EDID.
RMT2-IR INST ALLA TION 6 1. Remove battery cover from the back of the RMT2-IR remote. 2. V erify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery , hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
IR CODE CONFLICTS In the event of IR con fl icts, please do the following: 1. Remove the battery cover from the back of the RMT 2-IR remote. 2. Locate the Dip Switches above the batteries 3. Switch the Dip Switches on the RMT 2-IR to any of the combinations pictured below .
SPECIFICA TIONS 8 Video Ampli fi er Bandwidth .......................................................................... 2x 1.65 Gbps Input Video Signal ........................................................................................ 1.2 volts p-p Input DDC Signal .
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc.
An important point after buying a device Gefen DL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen DL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen DL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen DL you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen DL will certainly help you make a decision on the purchase.
If you already are a holder of Gefen DL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen DL.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen DL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen DL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
