Instruction/ maintenance manual of the product 4x4 HDTV Matrix Gefen
Go to page of 15
4x4 HDTV Matrix USER MANUAL www.gefen.com.
T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday through Friday . Write T o: Gefen Inc. C/O Customer Service 20600 Nordhoff St. Chatsworth, CA 9131 1 Notice Gefen Inc.
T ABLE OF CONTENTS Introduction / Operation Notes Features Panel Layout Using the 4x4 HDTV Matrix RMT16-IR Installation Dip Switch Guidelines IR Codes RS-232 Interface 4x4 HDTV Matrix Rack Mount Diagr.
INTRODUCTION Thank you for purchasing the 4x4 HDTV Matrix. The 4x4 HDTV Matrix switches four HDTV sources to any four DVI displays. The 4x4 HDTV Matrix switcher has four DVI inputs and four DVI outputs. Matrix input #1 and the DVI port of HDTV source #1 connects using a male to male DVI cable.
2 FEA TURES Features • Allows any HDTV display to view any source at any time • Allows any source to be displayed on multiple displays at the same time • Maintains resolutions up to 1080p, 2K, a.
P ANEL LA YOUT 3 Display 1 LED Indicator Front Panel RS232 Controller Port Display 2 LED Indicator Display 3 LED Indicator Display 4 LED Indicator IR Sensor IR Extender Eye Port Power Indicator Back P.
Connect all the sources to the DVI inputs on the 4x4 HDTV Matrix, using the supplied cables. Connect the HDMI/DVI displays to the outputs on the 4x4 HDTV Matrix. Connect the 24VDC powersupply to the 4x4 HDTV Matrix Controlling the 4x4 HDTV Matrix using the RMT16-IR: Pressing Buttons.
5 RMT16-IR INST ALLA TION 1. Remove battery cover from the back of the RMT16-IR remote. 2. V erify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery , hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
6 DIP SWITCH GUIDELINES Inside the 4x4 HDTV Matrix is a bank of Dip Switches. Below is a table describing their functions. By default, all switches are set to the Off position.
7 IR CODES In the event of IR con fl icts, please do the following: 1. Remove the battery cover from the back of the RMT16-IR remote. 2. Locate the Dip Switches above the batteries 3. Switch the Dip Switches on the RMT16-IR to any of the combinations pictured below .
RS-232 INTERF ACE 8 Binary T able ASCII Corresponding RMT16-IR Button Binary ASCII Corresponding RMT16-IR Button Binary 1 1 001 1 0001 9 9 001 1 1001 2 2 001 1 0010 a 10 01 10 0001 3 3 001 1 001 1 b 1.
4x4 HDTV MA TRIX RACK MOUNT DIAGRAM 9.
Video Ampli fi er Bandwidth ................................................................................ 1.65 Gbps Input Video Signal ......................................................................................... 1.2 volts p-p Input DDC Signal .
DDC Short form for Display Data Channel. It is a VESA standard for communication between a monitor and a video adapter . Using DDC, a monitor can inform the video card about its properties, such as maximum resolution and color depth.
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc.
An important point after buying a device Gefen 4x4 HDTV Matrix (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gefen 4x4 HDTV Matrix yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gefen 4x4 HDTV Matrix - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gefen 4x4 HDTV Matrix you will learn all the available features of the product, as well as information on its operation. The information that you get Gefen 4x4 HDTV Matrix will certainly help you make a decision on the purchase.
If you already are a holder of Gefen 4x4 HDTV Matrix, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gefen 4x4 HDTV Matrix.
However, one of the most important roles played by the user manual is to help in solving problems with Gefen 4x4 HDTV Matrix. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gefen 4x4 HDTV Matrix along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center