Instruction/ maintenance manual of the product ARTC7511 Amana
Go to page of 32
Para recibir un manual en español gratis, envíe por correo o por fax su nombre, dirección, y número de modelo a: Amana Appliances Consumer Communications/Spanish Manual 2800 220th Trail PO Box 890.
2 Contents Model Identification .................................................... 2 Important Safety Information ALL APPLIANCES .................................................. 3 SURF ACE COOKING UNITS .................................. 4 GLASS/CERAMIC COOKING SURF ACES .
3 IMPORT ANT SAFETY INFORMA TION WARNING ! T o reduce the risk of the appliance tipping, it must be secured by a properly installed anti-tip bracket(s). T o make sure bracket has been installed properly , remove the storage drawer or panel and look under the range with a flashlight.
4 SURF ACE COOKING UNITS 1. Use proper pan size. This appliance is equipped with one or more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element.
5 Installation Packing Material Remove protective packing materials from range. T ape residue can be cleaned with a soft cloth and alcohol. Range Location Underwriter’s Laboratories, Inc. specifies range can be installed flush against right and left base cabinets, and rear vertical wall.
6 Power Cord Requirements Power cord is not supplied with range. Power cord must be U.L. Listed and meet NEC and Mobile Home Manufacturers Association Standards. Cord must be rated at a minimum 250V—40 AMP , equipped with a plug configuration in accordance with NEMA.
7 Range has been grounded at the factory to the center (nickel plated) terminal of the terminal block in accordance with the National Electrical Code (section 2560). When a separate ground is required by local code, disconnect the grounding strap from the terminal block.
8 Installing 4-Wire Power Cord WARNING ! T o avoid the risk of severe electrical shock or death, ground wire must be attached to frame of range, using ground screw provided. Ground wire must not contact any other terminal. 1. Remove rear wire cover on back of range.
9 Converting 3-Wire to 4-Wire Power Cord 1. Remove rear wire cover . 2. Remove bottom strain relief screw and retain for further use. 3. Remove screw/hex nuts from terminal block and retain for further use.
10 Operation ARTC751 1 Range Features Shaded areas can become hot while cooking, baking, broiling, or self-cleaning. A B A C D D E F G G G H J K A—Surface Element Control Knob B—Electronic Range C.
11 Cooking with Dual Radiant Element Dual Element can be operated using inner element only or both elements. T o use inner element 1. Depress Element Size switch downward. Dual Element switch is located on right side of control panel next surface element control knob.
12 For best cooking results, use a pan with a flat bottom. Determine if pan has a flat bottom. 1. Rotate a ruler along bottom of pan. If pan is not flat, gaps between bottom of pan and edge of ruler occur . 2. A small groove or mark on a pan does not effect cooking times.
13 Oven Coo king Methods Element an d Fan Location A—Upper El e ment (Broil) B—Lo we r El ement (Bak e) C—Co nv ec tion Fa n Introduction This Range provid es standar d Baking and Broili ng, as well as EvenAir™ Convect ion Bak ing and Broiling.
14 Electronic Oven Control and Oven Switches TIM ER ON/ OFF CLO CK STOP TIM E COOK TIM E OVEN CANC EL CLE AN BROI L BAKE O N CLEAN BROIL LO CK DELAY OVEN ON CLEAN STOP TIM E BAKE OVEN LIGHT CONV ECTION STANDARD Electronic Oven Control Pad Descript ion OVEN CANC EL Cancels an y cooking or clean ing f unction ex cept tim er .
15 Display Displa ys tim e-of- day , t im er and tim ed or del ayed bak e sett ings. Displa ys tem perature and c ooking m ethod f or oven . Display Glo ssary TIME TIME dis pla ys while tim e-o f-da y, timed or d ela yed bak ing, or del ayed se lf- cleaning is set.
16 Setting Clock 1. Press CLOCK pad. • “TIME” displays. 2. Press or pad until correct time of day is displayed. 3. Press OVEN CANCEL pad to set time. • If OVEN CANCEL pad is not pressed, approximately 30 seconds after last entry , “TIME” disappears and time is set.
17 Oven Racks Range includes 3 oven racks. The EvenAir™ convection baking feature allows you to use all 3 racks simultaneously while providing even browning and faster baking times. See “Convection Pan Placement” section. Standard Oven Rack Oven Rack Placement Position oven rack before turning oven on.
18 Timed Baking or Timed Convection Baking Set oven to cook for desired amount of time. Oven automatically stops heating after time elapses. 1. Place food in oven. 2. Press COOK TIME pad. 3. Press or pad until cooking time is displayed. • Cook time can be set up to 1 1 hours and 55 minutes.
19 Delayed Baking or Delayed Convection Baking Set oven to begin and end baking at later time. Range control automatically calculates starting time. 1. Place food in oven. 2. Press BAKE pad. 3. Press or pad until desired temperature is displayed. • T emperature begins at 350°F and can be set from 170°F to 550°F in 5° increments.
20 2. Press BROIL pad. • “BROIL” and “---” displays. 3. Press or to set from HI to settings 5 thru 1. • Oven begins to broil within 5 seconds.
21 Prepare for Self-clean and Delayed Self-clean Cycle WARNING ! T o avoid risk of personal injury , do not touch oven vents or areas around vents during self-cleaning. These areas can become hot enough to cause burns. T o avoid risk of smoke damage or fire, clean excess spills from oven interior .
22 Baking Guide Follow these recommendations only as a guide for times and temperatures. Times, rack position, and temperatures may vary depending on conditions and food type.
23 Beef and Pork Roasting Guide Follow these recommendations only as a guide for times and temperatures. Times, rack position, and temperatures may vary depending on conditions and food type.
24 Convection Baking Guide Follow these recommendations only as a guide for times and temperatures. Times, rack position, and temperatures may vary depending on conditions and food type.
25 Convection Poultry Roasting Guide Follow these recommendations only as a guide for times and temperatures. Times, rack position, and temperatures may vary depending on conditions and food type.
26 Removing Oven Door CAUTION ! T o avoid personal injury or property damage, handle oven door with care. • Door is heavy and can be damaged if dropped. • Avoid placing hands in hinge area when door is removed. Hinge can snap closed and pinch hands.
27 Cleaning Part Materials to U se General D irection s Bake and broil, element Do not clean bak e el ement or broi l el ement. Any soil will bur n of f when element is heated.
28 Cleaning Smoothtop Rangetop Problem Cause To Prevent To Remov e Brown streak s and speck s Cleaning with a sponge or cloth containing soiled detergent water. Use sm oothtop cleaner conditioner with clean dam p paper towel. Use light application of sm oothtop cleaner conditioner with clean dam p paper towel.
29 Before Calling for Service Problem Check Oven light does work . C heck for loos e bulb. Check for burned out bulb; replace with 40- watt appliance bulb. Oven does not heat. Confirm r ange is plugged in. If both oven and s urfac e elem ents do not heat, c heck circuit break er.
30 COOKING PRODUCTS (excluding wall ovens) FULL ONE YEAR W ARRANTY LIMITED SECOND YEAR W ARRANTY ON ALL P ARTS LIMITED THIRD THRU FIFTH YEAR W ARRANTY ON GLASS/CERAMIC TOP , ELECTRIC SURF ACE ELEMENTS, OR GAS SURF ACE BURNERS FIRST YEAR Amana Appliances will repair or replace, including related labor and travel, any part (f.
31.
Quick Reference Instructions Part No. 36-31847301-0 Printed in U.S.A. 5/98 Amana Appliances Amana, Iowa 52204 Read “Important Safety Instructions” before using “Quick Reference Instructions”. If there are unanswered questions, see detailed sections of this manual.
An important point after buying a device Amana ARTC7511 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Amana ARTC7511 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Amana ARTC7511 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Amana ARTC7511 you will learn all the available features of the product, as well as information on its operation. The information that you get Amana ARTC7511 will certainly help you make a decision on the purchase.
If you already are a holder of Amana ARTC7511, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Amana ARTC7511.
However, one of the most important roles played by the user manual is to help in solving problems with Amana ARTC7511. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Amana ARTC7511 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
