Instruction/ maintenance manual of the product ZDT910 GE
Go to page of 16
GE M on ogram ® U se and Care Guide Electric Warming Drawer.
2 Consumer Information Electric Warming Drawer Introduction Your new Monogram warming drawer makes an eloquent statement of style, convenience and kitchen planning flexibility.
3 If you received a damaged warming drawer Immediately contact the dealer (or builder) that sold you the warming drawer. Save time & money Before you request service, check the Before You Call For Service section in the back of this guide. It lists causes of minor operating problems that you can correct yourself.
4 IMPORTANT SAFETY INSTRUCTIONS SAFETY PRECAUTIONS When using your appliance, follow basic safety precautions, including the following: • Use this appliance only for its intended purpose as described in this guide.
5 SAFETY PRECAUTIONS • CAUTION: Items of interest to children should not be stored in cabinets above the warming drawer; children climbing on the drawer to reach items could be seriously injured. • Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam.
6 Features of Your Warming Drawer Electric Warming Drawer Design information (Not all features are on all models. Appearance may vary.) Feature Index Page 1 Warming Drawer Pan 11 Removable for cleaning. 2 Moisture Selector (on back of panel) 7, 9, 10 Use this to keep foods moist or crisp.
Using the Warming Drawer Electric Warming Drawer ON signal light The ON signal light is located below the ON/OFF switch and glows when the ON/OFF switch is in the ON position. It stays on until the ON/OFF switch is moved to the OFF position. The ON signal light is visible through the light viewer in the drawer front panel when the drawer is closed.
8 Using the Warming Drawer Electric Warming Drawer Rack • Rack will fit from front to back. • Preheat with the rack in place. • Using the rack allows for double stacking of items. When using the warming drawer… The warming drawer will keep hot, cooked foods at serving temperature.
Temperature selection chart for crisp foods To keep several different foods hot, set the temperature to the food needing the highest setting. Place the items needing the highest setting on the bottom of the drawer and items needing less heat on the rack.
10 Using the Warming Drawer Electric Warming Drawer Temperature selection chart for moist foods To keep several different foods hot, set the temperature to the food needing the highest setting. Place the items needing the highest setting on the bottom of the drawer and items needing less heat on the rack.
Care and Cleaning Electric Warming Drawer 11 Be sure the controls are in the OFF position and all surfaces are cool before cleaning any part of the warming drawer. Warming drawer pan Most cleaning can be done to the pan with the pan in place in the drawer.
12 Care and Cleaning Electric Warming Drawer Stainless steel Do not use a steel wool pad; it will scratch the surface. Clean with hot soapy water. Rinse and dry. If food soil remains, try a general kitchen cleaner, such as Fantastik® , Simple Green® or Formula 409® .
13 Before You Call For Service… Electric Warming Drawer Save time and money! Review the troubleshooting tips on this page first and you may not need to call for service. PROBLEM POSSIBLE CAUSE WARMING DRAWER • A fuse in your home may be blown or the circuit breaker tripped.
14 Consumer Services Electric Warming Drawer With the purchase of your new Monogram appliance, receive the assurance that if you ever need information or assistance from GE, we’ll be there. All you have to do is call—toll- free! GE Answer Center ® In the USA: 800.
YOUR MONOGRAM WARMING DRAWER WARRANTY Staple sales slip or cancelled check here. Proof of original purchase date is needed to obtain service under warranty.
Part No. 164D3333P164 Pub No. 49-8934 Printed in the United States 8-99 JR ZDK910 ZDT910 16 YOUR MONOGRAM WARMING DRAWER WARRANTY Staple sales slip or cancelled check here.
An important point after buying a device GE ZDT910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE ZDT910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE ZDT910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE ZDT910 you will learn all the available features of the product, as well as information on its operation. The information that you get GE ZDT910 will certainly help you make a decision on the purchase.
If you already are a holder of GE ZDT910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE ZDT910.
However, one of the most important roles played by the user manual is to help in solving problems with GE ZDT910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE ZDT910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
