Instruction/ maintenance manual of the product Wine Chiller Wine Reserve and Beverage Center GE
Go to page of 8
If you have questions , call 800.626.2000 or visit our website at: www .monogram.com Installation Instructions Wine Chiller , Wine Reserve and Beverage Center Design Guide With Installation Instructio.
Safety Information 2 CONTENTS Design Guide The Installation Space ............................ 3 Product Clearances ................................ 3 Side-by-Side Installation ........................ 3 Installation Instructions T ools, Hardware ....
Design Guide THE INST ALLA TION SP ACE The cutout depth should be 24 ″ The cutout dimensions shown allow for a full door swing and access to the pull-out racks when installed as a built-in in standard 24 ″ deep cabinets. • The wine chiller , wine reser ve and beverage center can be installed freestanding.
Installation Instructions 4 TOOLS REQUIRED • #2 Phillips screwdriver • Adjustable wrench P AR TS SUPPLIED • Monogram nameplate • Hardware for changing door swing • Optional stainless steel t.
Installation Instructions STEP 2 REVERSE DOOR SWING SKIP THIS STEP IF DOOR SWING SUITS THE INST ALLA TION 5 Parts Included: • T op left case hinge • Bottom left case hinge • Left and right side .
6 STEP 3 LEVEL • Use an adjustable wrench to turn the leveling legs and raise or lower the product. • Adjust carefully; the product should be level and plumb with cabinetry , and should align with adjacent toekick height. STEP 5 SLIDE PRODUCT INTO THE CUTOUT • Carefully , slide the unit into the opening.
7.
TEMPLA TE FOR NAMEPLA TE LOCA TION T o position nameplate: • Cut template along dotted line. • Hold or tape template behind glass door so that it is visible from the front side. • Remove backing from nameplate. • Place nameplate onto front side of door , matching illustration on the template.
An important point after buying a device GE Wine Chiller Wine Reserve and Beverage Center (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE Wine Chiller Wine Reserve and Beverage Center yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE Wine Chiller Wine Reserve and Beverage Center - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE Wine Chiller Wine Reserve and Beverage Center you will learn all the available features of the product, as well as information on its operation. The information that you get GE Wine Chiller Wine Reserve and Beverage Center will certainly help you make a decision on the purchase.
If you already are a holder of GE Wine Chiller Wine Reserve and Beverage Center, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE Wine Chiller Wine Reserve and Beverage Center.
However, one of the most important roles played by the user manual is to help in solving problems with GE Wine Chiller Wine Reserve and Beverage Center. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE Wine Chiller Wine Reserve and Beverage Center along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
