Instruction/ maintenance manual of the product T8 GE
Go to page of 2
Lamp Material Information Sheet Material Safety Da ta Sheets (MSDS) Information and Applicability The Material Safety Data Sheet (MSDS) re quirements of the Occupational Safety and Health Administration (OSHA) for che micals are not applicable to manufactured articl es such as lamps.
Normally a 1.5 inch diameter (T12) fluorescent la mp has approximately 1 - 1.25 gra ms of the phosphor per foot of lamp. A standard four- foot lamp has ab out 4 - 5 grams of the phosphor coating i ts inside length. The one-inch diamet er (T8) lamp would have proporti onally less phosphor due to its smaller size.
An important point after buying a device GE T8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE T8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE T8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE T8 you will learn all the available features of the product, as well as information on its operation. The information that you get GE T8 will certainly help you make a decision on the purchase.
If you already are a holder of GE T8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE T8.
However, one of the most important roles played by the user manual is to help in solving problems with GE T8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE T8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center