Instruction/ maintenance manual of the product ZXR758 GE Monogram
Go to page of 12
If you have questions , call 800.GE.CARES or visit our website at: www .monogram.com Installation Instructions ZXR758 and ZXR7510 Recirculating Accessories For Model ZV750, V ent Hood M o n o g r a m.
Installation Preparation W ARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS, OBSER VE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer .
Installation Preparation 3 REQUIRED ACCESSORIES This book provides step by step instructions to install the Monogram ZV750 wall mounted hood for recirculating operation. • One of the following accessory kits is required for non-vented wall mounted installations of model ZV750.
Installation Preparation 4 POWER SUPPL Y IMPORT ANT – (Please read carefully) W ARNING: FOR PERSONAL SAFETY , THIS APPLIANCE MUST BE PROPERLY GROUNDED. Remove house fuse or open circuit breaker before beginning installation. Do not use an extension cord or adapter plug with this appliance.
Installation Preparation 5 Check Installation Hardware Locate the hardware accessory box packed with the hood and check contents. REMOVE THE P ACKAGING The vent hood is shipped secured to a shipping board with 4 screws. • Remove the duct cover , parts box and styrofoam packaging.
Installation Instructions 6 1 DETERMINE INST ALLA TION LOCA TION T o determine the exact location of the vent hood. • Locate the template packed with the literature. – Measure 36" from the floor to the top of the cooking sur face. Add 25-1/2" recommended space from the cooking sur face to the bottom of hood.
Duct Length Measure Length Installation Instructions 7 5 INST ALL AIR DEFLECTOR ASSEMBL Y • Place the assembly over the hood outlet. • Hold the assembly against the ceiling. The penciled centerline should show through the slot on the deflector . Mark the two screw holes on the back of the assembly .
Installation Instructions 8 7 INST ALL DUCT COVERS AND UTILITY BARS • Separate the duct covers supplied with the hood. • Discard the upper (inner) section. • Insert the ZXR758 or ZXR7510 duct cover (with vent holes) into the original lower section.
Installation Instructions 9 9 FINALIZE INST ALLA TION • Remove the protective film covering the control panel on the front face of the hood, and any other packaging materials.
10.
11.
Note: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram TM local service in your area, call 1.800.444.1845. Note: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.
An important point after buying a device GE Monogram ZXR758 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE Monogram ZXR758 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE Monogram ZXR758 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE Monogram ZXR758 you will learn all the available features of the product, as well as information on its operation. The information that you get GE Monogram ZXR758 will certainly help you make a decision on the purchase.
If you already are a holder of GE Monogram ZXR758, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE Monogram ZXR758.
However, one of the most important roles played by the user manual is to help in solving problems with GE Monogram ZXR758. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE Monogram ZXR758 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
