Instruction/ maintenance manual of the product ZKD910 GE Monogram
Go to page of 8
If you have questions , call 800-GE-CARES or visit our website at: www .monogram.com In s tall a ti o n I nst ru ct i o ns 27" and 30" W arming Drawers Models: ZKD910 ZTD910.
2 Before you begin – Read these instructions completely and carefully . IMPORT ANT – Save these instructions for local inspector’ s use. IMPORT ANT – OBSERVE ALL GOVERNING CODES AND ORDINANCES. Note to Installer – Be sure to leave these instructions with the Consumer .
3 Design Information Warming Drawer Models A vailable ZTD910 30” Wide model ZKD910 27” Wide model Product Dimensions Dimension A ZTD910 30” ZKD910 26-3/4” The warming drawers may be installed directly into a wall or wall oven cabinetry , or below a countertop.
4 Design Information Warming Drawer Advance Planning • The drawer may be installed below a countertop, a cooktop, a single or double oven and side by side using 2 drawers. • The warming drawer can be installed below approved cooktops. Allow 2" min.
5 Installation Preparation Warming Drawer • Place carton on a flat sur face. • Open one end of the carton and lift off the top piece. • Lift the warmer up and out of the carton. • Place the drawer on top of the shipping carton to protect the drawer front and the finished flooring.
6 Design Information Warming Drawer Installation Below W all Ovens When installed under a wall oven: W arming drawers are approved for installation below only certain specified wall oven models. See the label attached to the top of the warming drawer for approved models.
7 Installation Warming Drawer Step 1 Install Anti-T ip Brackets Pr ovide Cabinet Suppor t IMPORTANT: When installed below a single or double oven, check to be sure that any oven supports above the cutout do not obstruct the 23-1/2 ” required depth of the warming drawer cutout.
NOTE: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram ® local service in your area, call 1.800.444.1845. NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance and specifications are subject to change without notice.
An important point after buying a device GE Monogram ZKD910 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE Monogram ZKD910 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE Monogram ZKD910 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE Monogram ZKD910 you will learn all the available features of the product, as well as information on its operation. The information that you get GE Monogram ZKD910 will certainly help you make a decision on the purchase.
If you already are a holder of GE Monogram ZKD910, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE Monogram ZKD910.
However, one of the most important roles played by the user manual is to help in solving problems with GE Monogram ZKD910. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE Monogram ZKD910 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
