Instruction/ maintenance manual of the product JN327, JV327 GE
Go to page of 12
Use and Car e of Recir culation Hood Model JN327 and V entilating Hood Models JV327, JV337 & JV347 IMPOR T ANT SAFETY INFORMA TION READ ALL INSTRUCTIONS BEFORE USING. W ARNING—TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJUR Y TO PERSONS, OBSER VE THE FOLLOWING: A.
IMPOR T ANT SAFETY INSTRUCTIONS (continued) W ARNING—TO REDUCE THE RISK OF INJUR Y TO PERSONS IN THE EVENT OF A RANGE T OP GREASE FIRE, OBSER VE THE FOLLOWING: * A. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray , then turn off the burner .
T o Operate Lamp Switch Models: JN327, JV327, JV337 Press for OFF and ON. Lamp Switch Model: JV347 Rotate clockwise, first position for NIGHT LIGHT , second position for BRIGHT LIGHT . Fan Switch Models: JN327, JV327, JV337 CENTER position OFF , DOWN position LOW SPEED, TOP position HIGH SPEED.
W ARNING—T O REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJUR Y TO PERSONS, OBSER VE THE FOLLOWING: A. Installation work and electrical wiring must be done by qualified persons(s) in accordance with all applicable codes and standards, including fire-rated construction.
1. PREP ARA TION OF W ALL CABINET AND W ALL NOTE: For easier installation make all hood and vent cutouts in the cabinet and wall before cabinet is permanently fastened in place. It is recommended that the power supply be brought into the hood from the wall below the cabinet as shown in Fig.
Models JV337, JV347 Model JV347 ducted installation: Use the reusable metal grease filter (WB02X8391). Remove the baffle from the top of the hood. Re-install the baffle so the short side marked “VENTED” is visible. The long side of the baffle should be inside the hood.
3. POWER SUPPL Y A. CIRCUIT VOL T AGE: This hood must be connected to a supply circuit of the proper voltage and frequency as specified on the rating plate. W ire size must conform to the requirements of the National Electrical Code or the prevailing local code for hoods of this rating.
B. ELECTRICAL CONNECTION 1. Be sure the power supply is disconnected before making electrical connections. 2. Remove the connection box cover located on the left side of the fan unit. 3. Attach the power supply through the knockout hole in the back or top of the hood.
Lamp Replacement Model JV347 has a lamp cover . The lamp cover need not be removed for lamp removal or installation. Remove the lamp and replace with an ordinary screw- base lamp bulb NOT MORE THAN 60 W A TTS. T o remove the lamp cover , if desired: • Press the sides with 2 fingers until the side prongs are released.
PROBLEM POSSIBLE CAUSE F AN DOES NOT • A fuse may be blown or a circuit breaker tripped. Replace fuse or reset circuit breaker . OPERA TE WHEN THE SWITCH IS ON F AN F AILS T O • Fan blade striking the hood shell. CIRCULA TE AIR • Excessively soiled filter should be checked and corrected before using the hood again.
Help Us Help Y ou… W rite down the model and serial numbers. Y ou’ll find them on a label on the back wall of the hood. These numbers are also on the Consumer Product Ownership Registration Card that came with your hood.
WHA T IS COVERED FULL ONE-YEAR W ARRANTY For one year from date of original purchase, we will provide, free of charge, parts and service labor in your home to repair or replace any part of the hood that fails because of a manufacturing defect.
An important point after buying a device GE JN327, JV327 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE JN327, JV327 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE JN327, JV327 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE JN327, JV327 you will learn all the available features of the product, as well as information on its operation. The information that you get GE JN327, JV327 will certainly help you make a decision on the purchase.
If you already are a holder of GE JN327, JV327, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE JN327, JV327.
However, one of the most important roles played by the user manual is to help in solving problems with GE JN327, JV327. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE JN327, JV327 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
