Instruction/ maintenance manual of the product JBP99 GE
Go to page of 12
1 229C 4053P545-5 31-10556-5 06-04 JR EER3000, EER3001, JBP24, JBP25, JBP26, JBP35, JBP48, JBP64, JBP66, JBP67, JBP68, JBP69, JBP71, JBP78, JBP80, JBP82, JBP83, JBP84, JBP99, JB600, JB710, JB905, JB968, JB988, JBS55 Installation Free-Standing Instructions Electric Ranges BEFORE YOU BEGIN Read these instructions completely and carefully .
TOOLS YOU WILL NEED FOR YOUR SAFETY : All rough-in and spacing dimensions must be met for safe use of your range. Electricity to the range can be disconnected at the outlet without moving the range if the outlet is in the preferred location (remove lower drawer).
3 Installation Instructions PREP ARE THE OPENING See illustrations for all rough-in and spacing dimensions. The range may be placed with 0” clearance (flush) at the back wall and side walls of the cabinet. NOTE: Use a 4 ′ power cord to prevent interference with the storage drawer .
4 Installation Instructions ELECTRICAL CONNECTIONS Use only a 3-conductor or a 4-conductor UL-listed range cord. These cords may be provided with ring terminals on wire and a strain relief device. A range cord rated at 40 amps with 125/250 minimum volt range is required.
5 Installation Instructions POWER CORD AND STRAIN RELIEF INST ALLA TION Remove the wire cover (on the back of the range) by removing five (5) screws using a 1/4” nut driver . Do not discard these screws. Remove the knockout ring (1 3 ⁄ 8 ″ ) located on bracket directly below the terminal block.
6 Installation Instructions ELECTRICAL CONNECTIONS (CONT .) 4-WIRE POWER CORD INST ALLA TION W ARNING: The neutral wire of the supply circuit must be connected to the neutral terminal located in the lower center of the terminal block. The power leads must be connected to the lower left and the lower right terminals of the terminal block.
7 Installation Instructions 3-WIRE CONDUIT INST ALLA TION Loosen the 3 lower terminal screws from the terminal block. Insert the center bare wire (white/neutral) tip through the bottom center terminal block opening. On certain models, the wire will need to be inserted through the ground strap opening and then into the bottom center block opening.
8 Installation Instructions INST ALL THE RANGE ANTI-TIP DEVICE INST ALLA TION An Anti-T ip bracket is supplied with instructions for installation in a variety of locations. The instructions include all necessary information to complete the installation.
LEVEL THE RANGE Install the oven shelves in the oven and position the range where it will be installed. Check for levelness by placing a spirit level or a cup, partially filled with water , on one of the oven shelves. If using a spirit level, take two readings—with the level placed diagonally first in one direction and then the other .
10 Notes.
11 Notes.
12 Printed in the United States.
An important point after buying a device GE JBP99 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE JBP99 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE JBP99 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE JBP99 you will learn all the available features of the product, as well as information on its operation. The information that you get GE JBP99 will certainly help you make a decision on the purchase.
If you already are a holder of GE JBP99, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE JBP99.
However, one of the most important roles played by the user manual is to help in solving problems with GE JBP99. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE JBP99 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
