Instruction/ maintenance manual of the product JBP46 GE
Go to page of 44
GE Appliances GE Answer Center ® 800.626.2000 Part No. 164D3333P035 Pub. No. 49-8781 JBP19 JBP21 JBP24 JBP25 JBP26 JBP30 JBP45 JBP46 JBP47 Owner’ s Manual Ranges Self-Cleaning Electric 3.
Congratulations! Y ou Are Now Part of the GE Family . Welcome to the GE family. We’re proud of our quality products and we are committed to providing dependable service. You’ll see it in this easy-to- use Owner’s Manual and you’ll hear it in the friendly voices of our customer service department.
GE & Y ou, A Service Partnership. Inside you will find many helpful hints on how to use and maintain your range properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your range.
All ranges can tip and injury could result. T o prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-T ip device supplied. T o check if the device is installed and engaged properly , remove the kick panel or storage drawer and inspect the rear leveling leg.
Use this appliance only for its intended purpose as described in this Owner’ s Manual. When using electrical appliances, basic safety precautions should be followed, including the following: ■ Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.
■ Use only dry pot holders—moist or damp pot holders on hot surfaces may result in burns from steam. Do not let pot holders touch hot surface units or heating elements. Do not use a towel or other bulky cloth. ■ For your safety, never use your appliance for warming or heating the room.
T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information ■ Stand away from the range when opening the oven door. Hot air or steam which escapes can cause burns to hands, face and/or eyes. ■ Do not heat unopened food containers.
■ Do not clean the door gasket. The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket. ■ Clean only parts listed in this Owner’s Manual. ■ Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.
Use proper pan size—select cookware having flat bottoms large enough to cover the surface unit heating element. The use of undersized cookware will expose a portion of the surface unit to direct contact and may result in ignition of clothing. Proper relationship of cookware to surface unit will also improve efficiency .
■ Clean the cooktop with caution. If a wet sponge is used to wipe spills on a hot cooktop, be careful to avoid steam burns. ■ Keep an eye on foods being fried at high or medium high heat settings. ■ Foods for frying should be as dry as possible.
Using the surface units. 11 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Set Push the knob in and turn in either direction to the setting you want. At both OFF and HI the control clicks into position.
Using the oven controls. 12 HR MIN AUTOMA TIC OVEN L D COOK TIME ON/OFF TIMER ON/OFF ST ART TIME ON/OFF CLOCK 2 3 4 5 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service 1 Throughout this manual, features and appearance may vary from your model.
OFF PREHEA TED OVEN ON BROIL LATCH DOOR 450 AUTO SELF CLEAN WM 200 250 300 350 400 500 550 Oven Control Settings OVEN ON Light Glows anytime the oven is heating. The light will flash when the oven automatically turns off to remind you to turn the Oven Temperature knob to OFF .
T o avoid possible burns, place the shelves in the desired position before you turn the oven on. Before you begin… The shelves have stop-locks, so that when placed correctly on the supports, they will stop before coming completely out, and will not tilt.
15 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Aluminum Foil Never entirely cover a shelf with aluminum foil.
Broiling guide 16 Quantity and/ Shelf First Side Second Side Food or Thickness Position T ime (min.) T ime (min.) Comments Bacon 1/2 lb. (about C 4 1 ⁄ 2 4 1 ⁄ 2 Arrange in single layer . 8 thin slices) Ground Beef 1 lb. (4 patties) C 10 7 Space evenly .
Using the clock and timer . T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self-cleaning cycle.
Using the timed baking and roasting features. 18 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Do not latch the oven door during timed cooking.
Adjust the oven thermostat—Do it yourself! T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Y ou may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it.
Using the self-cleaning oven. Never force the latch handle. Forcing the handle will damage the door lock mechanism. 20 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Before a Clean Cycle The range must be completely cool in order to set the self-clean cycle.
21 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information How to Delay the Start of Cleaning (on some models) Latch the door. Turn the Oven Temperature knob to AUTO SELF CLEAN. Press the ST ART TIME ON/OFF pad.
Care and cleaning of the range. If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device is re-engaged properly when the range is replaced. Failure to take this precaution could result in tipping of the range and cause injury .
Lift-Off Oven Door The oven door is removable for cleaning. Do not lift the door by the handle. T o remove the door , open it to the special stop position. Grasp firmly on each side and lift the door straight up and off the hinges. Do not place hands between the hinge and the oven door frame.
Oven Heating Elements Do not clean the bake element or the broil element. Any soil will burn off when the elements are heated. To clean the oven floor, gently lift the bake element.
25 Broiler Pan & Grid After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container. Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.
Be sure all surface units are turned off before raising the cooktop. Care and cleaning of the range. 26 Lift-Up Cooktop (on some models) Some models have a cooktop that can be lifted up for easier cleaning. The entire cooktop may be lifted up and supported in the up position.
Be sure all the controls are turned to OFF and the surface units are cool before attempting to remove them. Surface Units To clean the surface units, turn the control to the highest setting for a minute. The coils will burn off any soil. T o remove a surface unit: To remove the drip pans for cleaning, the surface units must be removed first.
Installation of the range. 28 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Before Y ou Begin IMPORT ANT : Save these instructions for the local electrical inspector’ s use.
29 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Prepare the Opening Allow 1 1 ⁄ 2 ″ spacing from the range to adjacent vertical walls above cooktop surface.
Installation of the range. 30 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Flooring Under the Range Y our range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting.
31 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information Power Cord Strain Relief Installation Remove the lower rear range wiring cover to expose the connector block and bracket. Remove the knockout ring (1 3 ⁄ 8 ″ ) located on bracket directly below the connector.
Installation of the range. 32 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully .
33 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 4-Wire Power Cord Installation W ARNING: The neutral wire of the supply circuit is connected to the neutral terminal located in the center of the connector block.
Installation of the range. 34 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . 3-Wire Conduit Installation Remove the 3 screws from the connector block.
35 T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information 4-Wire Conduit Installation Remove the 3 screws from the connector block. Remove the grounding strap from the connector block middle location and the screw connecting it to the frame of the range.
Installation of the range. 36 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Read these instructions completely and carefully . Anti-T ip Bracket Installation An Anti-T ip bracket is supplied with instructions for installation in a variety of locations.
Before you call for service… T roubleshooting T ips Installation Instructions Customer Service Operating Instructions Safety Information T roubleshooting T ips Save time and money! Review the charts on the following pages first and you may not need to call for service.
Before you call for service… 38 T roubleshooting T ips Problem Possible Causes What T o Do Food does not bake O v en controls • See the Using the or roast properly improperly set. oven section. Shelf position is • See the Using the incorrect or the oven section.
Problem Possible Causes What T o Do Oven temperature O v en thermostat • See the Adjust the oven too hot or too cold needs adjustment. thermostat—Do it yourself! section. Clock and timer Plug on range is • Make sure electrical plug is do not work not completely plugged into a live, properly inserted in the grounded outlet.
Before you call for service… 40 T roubleshooting T ips Problem Possible Causes What T o Do Excessive smoking Excessiv e soil. • Turn the Oven Temperature knob to OFF . Open the windows to rid the room of smoke. Wait until the LA TCH DOOR light goes off.
Problem Possible Causes What T o Do LA TCH DOOR light The ov en door was • Turn the Oven is on when you accidentally locked. Temperature knob to OFF . want to cook Allow the oven to cool. Never force the door latch handle. “F—and a number” Y ou hav e a function • If a function error code flash in the display error code.
Notes 42 Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service.
GE Electric Range W arranty All warranty service provided by our Factory Service Centers, or an authorized Customer Care ® technician. For service, call 800-GE-CARES.
Printed in Louisville, KY 10-96 CG Operating Instructions Installation Instructions Safety Information T roubleshooting T ips Customer Service Service T elephone Numbers. The GE Answer Center ® is open 24 hours a day, 7 days a week. GE Answer Center ® 800.
An important point after buying a device GE JBP46 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE JBP46 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE JBP46 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE JBP46 you will learn all the available features of the product, as well as information on its operation. The information that you get GE JBP46 will certainly help you make a decision on the purchase.
If you already are a holder of GE JBP46, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE JBP46.
However, one of the most important roles played by the user manual is to help in solving problems with GE JBP46. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE JBP46 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
