Instruction/ maintenance manual of the product S410 Alvarez
Go to page of 13
1 S410s REPAIR MANUAL S410s REPAIR MANUAL.
2 These instructions are intended to help restore any ailing S410s Passive Subwoofer back to factory working conditions. They show how to remove and replace the drivers and input assembly. Please contact Mackie Technical Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration.
3 Top left woofer replacement: 1 1 Six screws need to be removed from each side of the front of the grill (twelve screws total) using the phillips head screwdriver. This grill has a tendency to want to pop off, so please be sure to hold it in place with one hand or arm while removing the screws with your free hand.
4 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Top left woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
5 Top right woofer replacement: 1 1 Six screws need to be removed from each side of the front of the grill (twelve screws total) using the phillips head screwdriver. This grill has a tendency to want to pop off, so please be sure to hold it in place with one hand or arm while removing the screws with your free hand.
6 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Top right woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
7 Bottom left woofer replacement: 1 1 Six screws need to be removed from each side of the front of the grill (twelve screws total) using the phillips head screwdriver. This grill has a tendency to want to pop off, so please be sure to hold it in place with one hand or arm while removing the screws with your free hand.
8 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Bottom left woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
9 Bottom right woofer replacement: 1 1 Six screws need to be removed from each side of the front of the grill (twelve screws total) using the phillips head screwdriver. This grill has a tendency to want to pop off, so please be sure to hold it in place with one hand or arm while removing the screws with your free hand.
10 3 3 Carefully begin to remove the woofer. Caution: The woofer is approximately 8 pounds with the weight unevenly distributed. Bottom right woofer replacement continued: 4 4 The positive (blue and black) and negative (solid black) cables are still attached to the woofer terminals.
11 Input assembly replacement: 1 1 Eight screws need to be removed from the input assembly (located on the rear of the cabinet) using the phillips head screwdriver. Once the screws are removed, the input assembly may be loosened by prying a fl at head screwdriver in between it and the cabinet.
12 3 3 Two cables need to be removed from the input assembly PCB (as shown on the left): (1) the solid black cable attaches to the negative terminal (connection J4). This is for the input jack, and (2) the grey and black cable attaches to the positive terminal (connection J3).
13 This page left blank intentionally.
An important point after buying a device Alvarez S410 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alvarez S410 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alvarez S410 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alvarez S410 you will learn all the available features of the product, as well as information on its operation. The information that you get Alvarez S410 will certainly help you make a decision on the purchase.
If you already are a holder of Alvarez S410, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alvarez S410.
However, one of the most important roles played by the user manual is to help in solving problems with Alvarez S410. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alvarez S410 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
