Instruction/ maintenance manual of the product HFT2-300 Alto-Shaam
Go to page of 26
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.251.3800 • 800.558.8744 USA / CANADA FAX: 262.251.7067 • 800.
Delivery ...................................... 1 Unpacking .................................... 1 Safety Procedures and Precautions ................. 2 Installation Installation Requirements ...................... 3 Leveling .........................
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 1. DELIVERY This Alto-Shaam appliance has been thoroughly tested and inspected to ensure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 2. NOTE For equipment delivered for use in any location regulated by the following directive: DO NOT DISPOSE OF ELECTRICAL OR ELECTRONIC EQUIPMENT WITH OTHER MUNICIPAL WASTE. 1. This appliance is intended to hold foods for the purpose of human consumption.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 3. SITE INSTALLATION INSTALLATION SITE INSTALLATION In order to maintain established National Sanitation Foundation standards, all stationary floor models must be sealed to the floor with a R.T.V. or silastic meeting N.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 4. SITE INSTALLATION INSTALLATION 48" (1220mm) 43-13/16" (1 1 13mm) 12-1/2" (318mm) T op Surface 20-1/8" (509mm) 26-1/8" (663mm) 4-7/16" ( 111 mm) Well 12-3/4" (322mm) Opening 9-13/16" (248mm) To Well 20-1/8" (512mm) 13" (331mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 5. SITE INSTALLATION INSTALLATION 12- 11 /16" (322mm) Opening 34-3/8" (872mm) 4-7/16" ( 111 mm) Well 13" (331mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 6. SITE INSTALLATION INSTALLATION 12-1/2" (318mm) T op Surface 59-1/2" (1512mm) T op Surface 51" (1296mm) Well TOP VIEW 60" (1525mm) 27-15/16" (709mm) 4-1/8" (104mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 7. SITE INSTALLATION INSTALLATION 12-1/2" (318mm) T op Surface 71-7/16" (1814mm) T op Surface 64-1/8" (1628mm) Well TOP VIEW 72" (1830mm) 33-15/16" (861mm) 4-1/8" (104mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 8. capacities • options INSTALLATION OPTIONS AND ACCESSORIES Panel Color Choices see service parts Pan Dividers, Full Size 16019 Pan Dividers, Half and Third Size 11318 PRODUCT/PAN CAPACITY - Based on 4" (65mm) deep pans HFT2-400, HFTSYS-400 96 lb (44 kg) maximum max .
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 9. ELECTRICAL CONNECTION INSTALLATION The appliance must be installed by a qualified service technician. The oven must be properly grounded in accordance with the National Electrical Code and applicable local codes.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 10. USER SAFETY INFORMATION: This appliance is intended for use in commercial establishments by qualified personnel who are familiar with the purpose, limitations, and associated hazards of this appliance.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 11. 1. DO NOT ADD WATER TO HOT WELL Halo Heat ® hot wells maintain a constant and gentle temperature. Adding water is not recommended since water will accelerate the deterioration of the product and may damage the unit voiding the warranty.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 12. Chefs, cooks and other specialized food service personnel employ varied methods of cooking. Proper holding temperatures for a specic food product must be based on the moisture content of the product, product density, volume, and proper serving temperatures.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 13. CARE AND CLEANING PROTECTING STAINLESS STEEL SURFACES It is important to guard against corrosion in the care of stainless steel surfaces. Harsh, corrosive, or inappropriate chemicals can completely destroy the protective surface layer of stainless steel.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 14. EQUIPMENT CARE The cleanliness and appearance of this equipment will contribute considerably to operating efficiency and savory, appetizing food. Good equipment that is kept clean works better and lasts longer.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 15. Food avor and aroma ar e usually so closely related that it is dif cult, if not impossible, to separate them. There is also an important, inseparable relationship between cleanliness and food avor .
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 16. SERVICE 1 2 1 2 3 4 5 6 SERVICE PARTS MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 17. SERVICE SERVICE PARTS LIST - PANEL COLORS, BASKETS 2 1 3 1 3 4 Part numbers and drawings are subject to change without notice. MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO. QTY PART NO.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 18. 26 13 8 1 7 9 1 23 17 2 27 13 26 16 10 18 6 27 21 19 31 20 31 20 17 12 14 27 25 14 16 24 4 22 19 4 3 5 30 29 11 SERVICE Part numbers and drawings are subject to change without notice.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 19. MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO. QTY PART NO. QTY PART NO. QTY 1 INNER TOP LIGHT END 1007098 2 1007098 2 1007098 2 2 T.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 20. A 2 4 4 3 7 1 1 12 10 8 7 9 6 A 13 5 1 14 SERVICE Part numbers and drawings are subject to change without notice.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 21. SERVICE SERVICE PARTS LIST - BASE MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO. QTY PART NO.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 22..
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 23..
TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee.
An important point after buying a device Alto-Shaam HFT2-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alto-Shaam HFT2-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alto-Shaam HFT2-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alto-Shaam HFT2-300 you will learn all the available features of the product, as well as information on its operation. The information that you get Alto-Shaam HFT2-300 will certainly help you make a decision on the purchase.
If you already are a holder of Alto-Shaam HFT2-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alto-Shaam HFT2-300.
However, one of the most important roles played by the user manual is to help in solving problems with Alto-Shaam HFT2-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alto-Shaam HFT2-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
