Instruction/ maintenance manual of the product 49-8726 GE
Go to page of 44
Us e and Care & Installation G uide Self-Cleaning Radiant Range GE Appliances Safety Instructions ................... 3–5 Anti-Tip Device ......................... 3, 31, 35, 39 Operating Instructions, Tips Aluminum Foil.........................
HELP US HELP YOU… Read this guide carefully . It is intended to help you operate and maintain your new range properly . Keep it handy for answers to your questions. If you don’t understand something or need more help, call: GE Answer Center ® 800.
3 Important Safety Instructions IMPOR T ANT SAFETY INSTRUCTIONS Read all instructions befor e using this appliance. IMPOR T ANT SAFETY NOTICE • The California Safe Drinking W ater and T oxic Enforce.
IMPOR T ANT SAFETY INSTRUCTIONS (continued) • For your safety , never use your appliance for warming or heating the room. • DO NOT STORE OR USE COMBUSTIBLE MA TERIALS, GASOLINE OR OTHER FLAMMABLE V APORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
5 Important Safety Instructions Cooktop and Radiant Surface Units • Use proper pan size— Select cookware having flat bottoms large enough to cover the selected surface unit. The use of undersized cookware will expose a portion of the surface unit to direct contact and may result in ignition of clothing.
6 FEA TURES OF YOUR RANGE 9 13 14 12 11 16 18 17 19 24 21 4 5 6 3 2 1 25 10 15 JBP63 23 22 20 8 Broiler Pan and Grid 8 7.
7 Featur es of Y our Range Explained Feature Index Not all models have all features. on page 1 Storage Drawer 33 2 Anti-Tip Device 3, 31, 35, 39 See the Installation Instructions. 3 Broil Element 4, 26, 32 4 Oven Door Latch 18, 21, 24, Use for Self-Cleaning only .
8 HOW DOES THIS COOKT OP COMP ARE T O YOUR OLD ONE? T ype of Cooktop Description How It W orks Radiant Electric coils Heat travels to the glass surface and then to the cookware, so pans must be flat (Glass Cooktop) under a glass on the bottom for good cooking results.
9 General Information About Radiant Surface Units The radiant cooktop features heating units beneath a smooth glass surface. The surface units are shown by outlines on the glass. Before you use the cooktop for the first time, clean it with cleaning cream.
10 SURF ACE CONTROLS At both OFF and HI the control “clicks” into position. Y ou may hear slight “clicking” sounds during cooking, indicating the control is keeping the unit at the heat level or power level you set. Switching heats to higher settings always shows a quicker change than switching to lower settings.
11 SURF ACE COOKW ARE TIPS T ypes of Cookware The following information will help you choose cookware which will give good performance. Stainless Steel: highly r ecommended Especially good with a sandwich clad bottom.
12 SURF ACE COOKW ARE TIPS (continued) How to Check Pan Performance Use of correct cookwar e can affect the cooking performance and cleaning of your cooktop. The correct cookware reduces the temperature of the cooktop surface and minimizes the chance of spillovers burning onto the cooktop.
13 Observe the Following Points in Canning 1. Be sure the canner fits over the center of the surface unit. If your cooktop or its location does not allow the canner to be centered on the surface unit, use smaller diameter pots for good canning results.
GLASS COOKT OP CLEANING Glass Cooktop Cleaning Cleaning of glass cooktops is dif ferent from cleaning a standard porcelain finish. T o maintain and protect the surface of your new glass cooktop follow these basic steps. Before you use the cooktop for the first time, clean it with cleaning cream.
15 AUT OMA TIC TIMERS AND CLOCK The automatic timers and clock on your range are helpful devices that serve several purposes. 12 9 3 6 12 9 3 6 STOP TIME DELAY START PUSH TO TURN 3 6 9 12 50 60 0 10 20 30 40 OFF T o Set the Clock T o set the Clock, push the knob in and turn the clock hands to the correct time.
USING YOUR OVEN Before Using Y our Oven 1. Look at the controls. Be sure you understand how to set them properly . 2. Check the oven interior . Look at the shelves. T ake a practice run at removing and replacing them properly to give sure, sturdy support.
17 Oven Light The light comes on automatically when the door is opened. Shelf Positions The oven has four shelf supports as identified in this illustration as A (bottom), B, C and D (top). Shelf positions for cooking are suggested in the Baking, Roasting and Broiling sections.
18 BAKING Do not lock the oven door with the latch during baking. The latch is used for self-cleaning only . Y our oven temperature is controlled very accurately using an oven control system.
19 Baking Pr eheating Preheat the oven if the recipe calls for it. Preheat means bringing the oven up to the specified temperature before putting the food in the oven. T o preheat, set the oven at the correct temperature—selecting a higher temperature does not shorten preheat time.
20 BAKING (continued) Pies Cakes For best results, bake pies in dark, rough or dull pans to produce a browner , crisper crust. Frozen pies in foil pans should be placed on an aluminum cookie sheet for baking since the shiny foil pan reflects heat away from the pie crust; the cookie sheet helps retain it.
21 TIMED BAKING How to Time Bake Do not lock the oven door with the latch during timed baking. The latch is used for self-cleaning only . Y our oven can be set to turn off and on automatically . NOTE: Before beginning, make sure the oven clock shows the correct time of day .
22 TIMED BAKING (continued) How to Set Delay Start and Automatic Stop T o avoid possible burns, place the shelves in the correct position before you turn the oven on. Y ou can set the oven control to delay-start the oven, cook for a specific length of time and then turn off automatically .
23 ADJUST THE OVEN THERMOST A T— DO IT YOURSELF! Y ou may find that your new oven cooks differ ently than the one it replaced. W e recommend that you use your new oven for a few weeks to become more familiar with it, following the times given in your recipes as a guide.
24 ROASTING Do not lock the oven door with the latch during roasting. The latch is used for self-cleaning only . Roasting is cooking by dry heat. T ender meat or poultry can be roasted uncovered in your oven. Roasting temperatures, which should be low and steady , keep spattering to a minimum.
25 Oven Approximate Roasting T ime Internal T ype T emperature Doneness in Minutes per Pound T emperature °F . Meat 3 to 5 lbs. 6 to 8 lbs. T ender cuts; rib, high quality sirloin 325° Rare: 24–30.
BROILING Do not lock the oven door with the latch while broiling. The latch is used for self-cleaning only . Broiling is cooking food by intense radiant heat from the upper element in the oven. Most fish and tender cuts of meat can be broiled. Follow these directions to keep spattering and smoking to a minimum.
27 BROILING GUIDE • Always use a broiler pan and grid. They are designed to minimize smoking and spattering by trapping juices in the shielded lower part of the pan. • The oven door should be open to the broil stop position. • Make sure you turn the OVEN SET and OVEN TEMP knobs all the way to the BROIL position.
28 OPERA TING THE SELF-CLEANING OVEN Normal Cleaning Time: 3 hours Before a Clean Cycle The range must be completely cool in order to set the self-clean cycle. Y ou may have to allow the oven to cool before you can slide the door latch. W e recommend venting with an open window or using a ventilation fan or hood during the first self- clean cycle.
29 Operating the Self-Cleaning Oven 1. T urn the OVEN SET and OVEN TEMP knobs to CLEAN. The controls will snap into position when the CLEAN location is reached. 2. Slide the latch handle to the right as far as it will go. Never force the latch handle.
OPERA TING THE SELF-CLEANING OVEN (continued) After cleaning is complete, the door will stay locked until the oven cools down. The door latch and oven control knobs must be returned to their original positions before you can use the oven. 1. When oven has cooled, slide the latch handle to the left as far as it will go and open the door .
31 CARE AND CLEANING Proper care and cleaning are important so your radiant range will give you efficient and satisfactory service. If soil, mineral deposits from evaporated water spills or metal rub-off from aluminum cookware is not removed, it will burn on the glass cooktop surface and cause permanent discoloration.
32 CARE AND CLEANING (continued) Lift-Off Oven Door The oven door is removable, but it is heavy . Y ou may need help removing and replacing the door . Do not lift the door by the handle. This can cause damage to the door . T o remove the door , open it a few inches to the special stop position that will hold the door open.
33 Car e and Cleaning Oven Shelves Clean the shelves with an abrasive cleanser or steel wool. After cleaning, rinse the shelves with clean water , rinse and dry .
34 CARE AND CLEANING (continued) Control Panel and Knobs Clean up any spills or spatters with a damp cloth. Remove heavier soil with warm, soapy water . Clean the control panel with mild liquid dish detergent and a soft cloth. Rub the control panel lightly .
35 INST ALLA TION INSTRUCTIONS STEP 1 PREP ARE THE OPENING 1 1 ⁄ 2 inch spacing is recommended fr om the range to adjacent ver tical walls above cooktop sur face. Allow 30 inches minimum clearance between sur face units and bottom of unprotected wood or metal top cabinet, and 15 inches minimum between counter top and adjacent cabinet bottom.
36 INST ALLA TION INSTRUCTIONS (continued) C. Assemble the strain relief in the hole. Inser t the power cord thr ough the strain relief and tighten. Allow enough slack to easily attach the cord ter minals to the connector block. If tabs are pr esent at the end of the winged strain relief, they can be removed for better fit.
37 STEP 5 4 WIRE POWER CORD INSTALLATION A. Remove the 3 screws from the connector block. B. Remove the grounding scr ew and strap from the connector block middle location and the screw connection to the frame of the range. C. Inser t screws thr ough each power cord ter minal ring and into connector block until screw engages nut.
38 INST ALLA TION INSTRUCTIONS (continued) STEP 7 4 WIRE CONDUIT INSTALLATION Remove the 3 screws fr om the connector block. Remove the grounding strap from the connector block middle location and the screw connecting it to the frame of the range. Inser t bare wir es between the connector block ter minals and movable nuts.
39 STEP 9 LEVELING THE RANGE The range must be level. Leveling feet are located at each cor ner of the base of the range. Remove the storage drawer or kick panel (depending on your model) and using channel locks, rotate the leveling feet in and out as requir ed to level the range.
40 QUESTIONS? USE THIS PROBLEM SOL VER PROBLEM POSSIBLE CAUSE SURF ACE UNITS WILL NOT • Y o u must use pans which are absolutely flat. If light can be seen between MAINT AIN A ROLLING the pan bottom and a straight edge, the elements will not transfer heat properly .
41 The Pr oblem Solver PROBLEM POSSIBLE CAUSE OVEN WILL NOT WORK • Plug on range is not completely inserted in the electrical outlet. • The circuit breaker in your house has been tripped, or a fuse has been blown. • Oven controls not properly set.
42 PROBLEM POSSIBLE CAUSE OVEN WILL NOT • Automatic timer dials not set or not set properly . The clock must be set to time SELF-CLEAN of day and the ST OP TIME dial must be set and advanced beyond the time noted on oven clock. • The STOP TIME dial was not advanced for long enough.
Upon request, GE will provide Braille controls for a variety of GE appliances, and a brochure to assist in planning a barrier-free kitchen for persons with limited mobility.
WHA T IS NO T COVERED • Service trips to your home to teach you how to use the product. Read your Use and Care material . If you then have any questions about operating the product, please contact your dealer or our Consumer Affairs of fice at the address below , or call, toll free: GE Answer Center ® 800.
An important point after buying a device GE 49-8726 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE 49-8726 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE 49-8726 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE 49-8726 you will learn all the available features of the product, as well as information on its operation. The information that you get GE 49-8726 will certainly help you make a decision on the purchase.
If you already are a holder of GE 49-8726, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE 49-8726.
However, one of the most important roles played by the user manual is to help in solving problems with GE 49-8726. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE 49-8726 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
