Instruction/ maintenance manual of the product 29391 GE
Go to page of 72
29391 Call Waiting Caller ID Speakerphone User’ s Guide W e bring good things to life..
2 I MPORT ANT I NFORMA TION NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Industry Canada does not guarantee the equipment will operate to the user’ s satisfaction.
3 T ABLE OF C ONTENTS WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. SEE MARKING ON BOTTOM / BACK OF PRODUCT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE EXCLAMA TION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORT ANT INSTRUCTIONS ACCOMPANYING THE PRODUCT .
4 I NTRODUCTION Y our Caller ID phone stores and displays specific information, provided by your local telephone company , to subscribers of Caller ID or similar caller identification services. Y ou must subscribe to one of these services in order to use this unit.
5 M ODULAR J ACK R EQUIREMENTS Y ou need an RJ11(CA11A) type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don’ t have a modular jack, call your local phone company to find out how to get one installed.
6 I NST ALLA TION & S ETUP I MPORT ANT I NST ALLA TION I NFORMA TION • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface.
7 Batter y compartment NOTE: If the low battery icon appears in the display , you need to replace the batteries. It is important that you replace the batteries as soon as possible in order to maintain Caller ID operation. During the replacing of batteries, a backup circuit in the unit will retain your stored information for up to 60 seconds.
8 2 1 3 D ESKTOP I NST ALLATION 1. Plug the coiled cord into the handset. Plug the other end into the jack on the side of the base. Place the handset in the cradle on the base. 2. Plug the line cord into jack on the back of the base. Plug the other end into a wall jack.
9 2 3 4 1 6 8 W ALL M OUNT I NST ALLATION 1. Carefully turn the phone over . Detach the wall mount bracket from the two sets of top grooves by pressing the tabs in. Pull the bracket from the phone and turn it around so that it looks like the diagram below .
10 S ETTING U P THE C ALLER ID M ENU Y ou should not plug the telephone into the wall line jack while setting up the Caller ID menu. An incoming call may invalidate the change if it was not yet saved. The phone must display xx CALLS before you can enter the setup menu.
11 S ETTING Y OUR L OCAL A REA C ODE The telephone uses the programmed area code to determine the number format to display when a valid Caller ID signal is received and is also used for the Dialback feature. 1. Press the OPTIONS button. OPTIONS MENU ^ v appears.
12 6. Repeat steps 4 and 5 until all the digits for your area code are correct. If you make a mistake, you can simply retrace the previous steps until your area code is set. 7. Press OPTIONS once again to store the area code and return to the “ LOCAL AREA CODE ” display .
13 S ETTING THE D ISPLA Y C ONTRAST This adjustment allows optimization of the contrast and viewing angle of the display . 1. Press the OPTIONS button. OPTIONS MENU ^ v appears. 2. Press the REVIEW up button until (LCD) CONTRAST appears. 3. T o enter and change the contrast, press the OPTIONS button.
14 S ETTING THE D IAL M ODE This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. 1. Press the OPTIONS button. OPTIONS MENU ^ v appears. 2. Press the REVIEW up button until T/P DIAL MODE appears. 3. T o enter and change the dial mode, press the OPTIONS button.
15 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN C ALLER ID F EA TURES S UMMARY S CREEN The Summary Screen shows the current time, date, and number of new calls to be reviewed.
16 R ECEIVING AND S TORING C ALLS This unit receives and displays information transmitted by your local phone company . This information can include the phone number , date, and time; or the name, phone number , date, and time. The unit can store up to 60 calls for later review .
17 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN DELETE button D ELETING C ALL R ECORDS • T o delete the record shown in the display , press the DELETE button once.
18 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN REVIEW buttons OPTIONS button I F YOU PROGRAMMED YOUR LOCAL AREA CODE IN THE SETUP MEN U 1.
19 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN REVIEW buttons 3. Press the DIAL button and the display shows PICKUP PHONE .
20 M ESSAGE I NDICA TORS The following special messages indicate the status of a message or the unit: NO CALLS The caller memory is empty . UNKNOWN The incoming call does not have Caller ID service or CALL their service area is not linked to yours.
21 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN VOLUME buttons U SING THE S PEAKERPHONE S PEAKERPHONE L OCA TION For best speakerphone performance, avoid the following: • Areas with high background noise.
22 VOLUME buttons 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN SPEAKER button T ELEPHONE B ASICS R ECEIVING A P HONE C ALL 1.
23 T EMPORARY T ONE D IALING If you have pulse service, you can temporarily change from pulse to tone service. After dialing the telephone num- ber , press and release the * button on the telephone. This allows access to phone services that require a tone, such as banking and long-distance services.
24 O NE -T OUCH R EDIAL If the last call you dialed was busy , you can redial it immediately by just pressing the REDIAL button without hanging up the handset.
25 F LASH This feature is used to activate customer calling services available through your local phone company , such as Call W aiting. These services generally require an extra monthly fee. If you subscribe to any of these services, please refer to the phone company ’ s instructions on how to use FLASH.
26 M EMORY Before you store any telephone number into memory , make sure the dial mode is correct for the type of telephone you ’ re using. The default dial mode is tone (touch-tone), so if you have pulse (rotary) service, you must first change the dial mode.
27 S TORING F REQUENTL Y C ALLED N UMBERS 1. Pick up the handset or press the SPEAKER button. 2. Press STORE. 3. Enter the telephone number (it will not actually call the number in this mode). If you make a mistake, hang up and repeat the procedure for storing from the beginning.
28 F REQUENTL Y C ALLED N UMBERS 1. Make sure the handset is hung up. 2. Press DIAL. 3. Press 0-9 for the memory location. The number shows on the display . C HANGING A S TORED N UMBER Repeat the storage sequence. The new number replaces the old number at the memory location.
29 Y ou may need to adjust the length of the pause duration. It can be adjusted from 1 to 9 seconds. The default setting is 4 seconds. 1. Pick up the handset or press SPEAKER. 2. Press the STORE button. 3. Press 1-9 (1=1 second, 2=2 seconds, etc.) 4. Press STORE again.
30 T ROUBLESHOOTING T IPS N O D IAL T ONE • Check all cabling to make sure that all connections are secure and not damaged. • Check hook switch: Does it fully extend when handset is lifted from cradle? N O D ISPLA Y • Replace batteries. • Check for proper battery installation.
31 P HONE D OES N OT R ING • Is the ringer switch in the OFF position? • Are you using too many phones on one line? (The total REN of all phones on the same line should not be greater than the maximum REN for your calling area. See FCC Registration Information) • Perform the checks under the first problem (Number 1).
32 G ENERAL P RODUCT C ARE T o keep your phone working and looking good, follow these guidelines: • A void putting near heating appliances and devices that generate electrical noise ( for example, motors and flourescent lamps). • DO NOT expose to direct sunlight or moisture.
33 I If you did not program your local area code in the 19 If you programmed your local area code in the setu 18 Important Information 2 Important Installation Information 6 Installation & Setup 6.
34 R Receiving a Phone Call 22 Receiving and Storing Calls 16 Redial 23 REN Number 35 Reviewing Call Records 16 Reviewing Numbers Stored in Memory 27 S Service 36 Setting the CID Display Language 12 S.
35 T ELEPHONE N ETWORK I NFORMA TION Should your equipment cause trouble on your line which may harm the telephone network, the telephone company , where practicable, may notify you that temporary discontinuance of service may be required.
Model 29391A 15403030 (Rev . 1 E/F) 99-39 Printed in China S ERVICE Thomson Consumer Electronics Canada, Inc. warrants to the purchaser or gift recipient that if any manufacturing defect becomes apparent in this product within 1 year from the original date of purchase, it will be replaced free of charge, including return transportation.
29391 T é l é phone mains libres à afficheur avec appel en attente Guide de l'utilisateur Les bonnes choses de la vie..
2 R ENSEIGNEMENTS IMPORT ANTS A VIS: L ’é tiquette d'Industrie Canada permet d ’ identifier les appareils certifi é s. Cette attestation signifie que l ’ appareil r é pond à certaines normes de protection, d ’ utilisation et de s é curit é pr é vues pour les t é l é communications.
3 T ABLE DES MA TIÈRES VOIR LES INDICATIONS EN DESSOUS OU À L’ARRIÈRE DU PRODUIT ATTENTION RISQUE DE DÉCHARGE ÉLECTRIQUE NE PAS OUVRIR A VERTISSEMENT : POUR ÉCARTER TOUT RISQUE D’INCENDIE OU DE DÉCHARGE ÉLECTRIQUE, NE P AS EXPOSER CE PRODUIT À LA PLUIE OU L ’HUMIDITÉ.
4 I NTRODUCTION Ce t é l é phone à afficheur m é morise et affiche l ’ information sur l ’ appelant, fournie par la compagnie de t é l é phone, aux abonn é s au service d ’ afficheur ou autres services similaires d ’ identification d ’ appelant.
5 P RISE MODULAIRE Une prise modulaire RJ11 (CA11A), le type le plus courant de prise t é l é phonique qui ressemble à celle ci-contre, est requise. Si aucune prise modulaire n ’ est install é e, en faire installer une par la compagnie de t é l é phone.
6 I NST ALLA TION ET PROGRAMMA TION R ENSEIGNEMENTS IMPOR T ANTS SUR L ’ INST ALLA TION • N ’ installez jamais le c â blage t é l é phonique durant un orage é lectrique.
7 Logement à piles REMARQUE : V ous devez remplacer les piles si l ’ ic ô ne de piles faibles est affich é . Il faut remplacer les piles d è s que possible afin de maintenir le bon fonctionnement de l ’ afficheur .
8 2 1 3 I NST ALLA TION SUR BUREAU 1. Branchez le cordon spiral é dans le combin é . Branchez l ’ autre extr é mit é dans la prise sur le c ô t é de la base. Placez le combin é sur la base. 2. Branchez le cordon t é l é phonique dans la prise à l ’ arri è re de la base.
9 I NST ALLA TION AU MUR 1. T ournez soigneusement le t é l é phone sens dessus dessous. D é tachez le support mural des deux languettes sup é rieures en enfon ç ant celles-ci. D é gagez le support du t é l é phone et tournez-le tel qu ’ illustr é ci-dessous.
10 P ROGRAMMA TION DU MENU D ’ AFFICHEUR Ne branchez pas le t é l é phone dans la prise murale quand vous programmez le menu d ’ afficheur . Un appel re ç u peut invalider le changement si vous ne l ’ avez pas encore sauvegard é . Le t é l é phone doit afficher xx CALLS avant que vous programmiez le menu.
11 P ROGRAMMA TION DE L' INDICA TIF R ÉGIONAL Le t é l é phone utilise l ’ indicatif r é gional programm é pour d é terminer le format de num é ro à afficher quand un signal d ’ afficheur valide est re ç u et est utilis é avec la fonction Rappel.
12 6. R é p é tez les é tapes 4 et 5 jusqu ’à ce que tous les chiffres de l ’ indicatif soient programm é s. En cas d ’ erreur , recommencez les é tapes pr é c é dentes jusqu ’à ce que l ’ indicatif soit exact.
13 P ROGRAMMA TION DU C ONTRASTE DE L' AFFICHEUR Ce r é glage permet d ’ optimiser le contraste et l ’ angle de visionnement de l ’ afficheur . 1. Appuyez sur la touche OPTIONS. MENU DE PROGRAMMA TION ^ v appara î t. 2. Appuyez sur la touche REVIEW avant jusqu ’à ce que CONTRAST (ACL) apparaisse.
14 P ROGRAMMA TION DU M ODE DE C OMPOSITION Ce r é glage permet de s é lectionner la composition par tonalit é (T ouch-T one) ou par impulsions (cadran rotatif). 1. Appuyez sur la touche OPTIONS. MENU DE PROGRAMMA TION ^ v appara î t. 2. Appuyez sur la touche REVIEW avant jusqu ’à ce que MODE DE COMPOSITION apparaisse.
15 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN C ARACTÉRISTIQUES DE L ’ AFFICHEUR É CRAN SOMMAIRE L' é cran Sommaire indique l'heure actuelle, la date et le nombre de nouveaux appels à revoir .
16 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN T ouches REVIEW R ÉCEPTION ET MÉMORISA TION D ’ APPELS Cet appareil re ç oit et affiche l ’ information transmise par la compagnie de t é l é phone.
17 S UPPRESSION DES DOSSIERS D ’ APPELANT • Pour supprimer le dossier affich é , appuyez une fois sur la touche DELETE. • Pour supprimer tous les dossiers pendant la consultation, maintenez la touche DELETE enfonc é e pendant environ 3 secondes.
18 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN T ouches REVIEW T ouche OPTIONS S I VOUS A VEZ PROGRAMMÉ L ’ INDICA TIF RÉGIONAL DANS LE MENU DE PROGRAMMA TION 1.
19 3. Appuyez sur la touche DIAL ; l ’ afficheur indique DECROCH/ REGLER . Une minuterie de 10 secondes se met en marche à ce point dans le coin sup é rieur droit de l ’ afficheur , pour indiquer le temps restant jusqu ’à ce que l ’ appareil retourne au dossier d ’ appelant.
20 I NDICA TEURS DE MESSAGE Les messages sp é ciaux ci-dessous indiquent l ’é tat d ’ un message ou de l ’ appareil : P AS D'APPEL La m é moire d ’ appelants est vide. APPELANT L ’ appelant n ’ est pas abonn é au service d ’ afficheur ou BLOQUE la r é gion n ’ est pas reli é e à la v ô tre.
21 U TILISA TION DE LA FONCTION MAINS LIBRES E MPLACEMENT DU HAUT - P ARLEUR Pour obtenir un meilleur rendement, é vitez ce qui suit : • Les endroits tr è s bruyants. (Le microphone peut capter les bruits et emp ê cher le haut-parleur de passer en mode R é ception quand vous cessez de parler .
22 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN T ouches VOLUME F ONCTIONS DE BASE DU TÉLÉPHONE R ECEVOIR UN APPEL 1. Assurez-vous que le s é lecteur RINGER est à HI ou LO.
23 T ouches VOLUME 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN T ouche.
24 R ECOMPOSITION M ONOTOUCHE Si le dernier num é ro appel é é tait occup é , vous pouvez le recomposer imm é diatement en appuyant sur la touche REDIAL sans raccrocher le combin é . REMARQUE: La fonction Recomposition m é morise tous les chiffres compos é s.
25 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN F LASH Cette fonction permet d ’ activer les services d ’ appel du client offerts par la compagnie de t é l é phone, comme l ’ appel en attente.
26 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN M ÉMOIRE T ouche SPEAK.
27 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN T ouche SPEAKER M EMORISA TION DES N UMEROS S OUVENT A PPELÉS 1. D é crochez le combin é ou appuyez sur la touche SPEAKER.
28 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQ RS 7 TUV 8 WX YZ 9 * PER 0 # SPEAKER HOLD FLASH VOLUME REDIAL STORE REVIEW DELETE DIAL OPTIONS A B 10/19 12:30 315 - 555 - 1324 SMITH JOHN T ouche SPEAKER M ÉMORISA TION DES N UMÉROS S OUVENT A PPELÉS 1. Assurez-vous que le combin é est raccroch é .
29 composition automatique. Par exemple, si vous devez faire le 9 pour obtenir une ligne ext é rieure ou entrer un code pour acc é der à la compagnie d ’ interurbain. Il se peut que vous deviez r é gler la dur é e de la pause. La pause peut ê tre r é gl é e de 1 à 9 secondes.
30 C ONSEILS DE DÉP ANNAGE A UCUN SIGNAL DE MANŒUVRE • V é rifiez tous les c â bles pour vous assurer que toutes les connexions sont bonnes et ne sont pas endommag é es. • V é rifiez l ’ interrupteur -crochet : ressort-il compl è tement quand le combin é est d é croch é ? A UCUN AFFICHAGE • Remplacez les piles.
31 L E TÉLÉPHONE NE SONNE PA S • Le s é lecteur de sonnerie est-il à OFF ? • Utilisez-vous trop de t é l é phones sur la m ê me ligne ? (Le facteur REN total pour tous les t é l é phones sur la m ê me ligne ne doit pas d é passer le facteur REN maximal de la r é gion.
32 S OINS ET ENTRETIEN V oici quelques conseils simples pour pr é server le bon fonctionnement et l ’ apparence de ce t é l é phone : •É viter de placer le t é l é phone pr è s d ’ un appareil de chauffage ou d ’ un appareil produisant du bruit é lectrique (ex.
33 A Afficheur avec appel en attente 15 A vant de commencer 5 C Caract é ristiques de l ’ afficheur 15 Commande de volume 23 Commutation entre le haut-parleur et le combin é 22 Compatibilit é ave.
34 P Pour Effacer un Numero Memorise 28 Pour Quitter la Programmation 14 Prise modulaire 5 Programmation de la Langue D'affichage 12 Programmation de L'indicatif R é gional 11 Programmation.
35 I NFORMA TION SUR LE RÉSEAU TÉLÉPHONIQUE Si cet appareil provoque des d é rangements sur la ligne et, par cons é quent, sur le r é seau t é l é phonique, la compagnie de t é l é phone signalera, s ’ il y a lieu, qu ’ elle doit temporairement interrompre le service.
Mod è le 29391A 15403030 (R é v . 1 E/F) 99-39 Imprim é en Chine © 1999 Thomson Consumer Electronics, Inc. T rademark(s) ® Registered Marque(s) ® d é pos é e(s) S ERVICE APRÈS - VENTE Thomson É lectronique Grand Public du Canada, Inc.
An important point after buying a device GE 29391 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE 29391 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE 29391 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE 29391 you will learn all the available features of the product, as well as information on its operation. The information that you get GE 29391 will certainly help you make a decision on the purchase.
If you already are a holder of GE 29391, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE 29391.
However, one of the most important roles played by the user manual is to help in solving problems with GE 29391. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE 29391 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
