Instruction/ maintenance manual of the product 1000 GBC
Go to page of 4
Operating Instructions General Binding Corporation Northbrook, IL USA 60062.
SAFETY MESSAGES Your safety as well as the safety of others is important to GBC. In this Operator Manual and on the product are impor- tant safety messages. Read these messages carefully. r.. The safety alert symbol precedes each safety message ..in this Operator Manual.
.
against the Paper Support, or, you may prefer to hold the sheets in place with one hand. 4. To punch, press the PUNCH ~ button (D2). The WirePRO 1000 punches up to 17 sheets of 20 Ib./80 gram paper at once. Punch only TWO clear covers at a time to prevent jams and excessive wear.
An important point after buying a device GBC 1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GBC 1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GBC 1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GBC 1000 you will learn all the available features of the product, as well as information on its operation. The information that you get GBC 1000 will certainly help you make a decision on the purchase.
If you already are a holder of GBC 1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GBC 1000.
However, one of the most important roles played by the user manual is to help in solving problems with GBC 1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GBC 1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
