Instruction/ maintenance manual of the product 500-E/Deluxe Alto-Shaam
Go to page of 24
MN-28945 • 06/07 W 1 6 4 N 9 2 2 1 W a t e r S t r e e t • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.251.3800 • 800.558.8744 USA / CANADA FAX: 262.251.7067 • 800.329.8744 U . S . A . ONLY WEBSITE: www.alto-shaam.com P R I N T E D I N U .
O p e r a t i o n a n d C a r e M a n u a l • 1. DELIVER Y This Alto-Shaam appliance has been thoroughly tested and inspected to insur e only the highest quality unit is provided. Upon r eceipt, check for any possible shipping damage and report it at once to the delivering carrier .
O p e r a t i o n a n d C a r e M a n u a l • 2. SAFETY PROCEDURES AND PRECAUTIONS Knowledge of proper pr ocedures is essential to the safe operation of electrically and/or gas ener gized equipment.
This appliance, complete with unattached items and accessories, may be delivered in one or more pack- ages. Check to insure that all accessories that were ordered have been received with the unit. Alto-Shaam holding cabinets are designed for the purpose of maintaining hot food at a temperature for safe consumption.
O p e r a t i o n a n d C a r e M a n u a l • 4. I N S T A L L A T I O N Site Installation OPTIONS & ACCESSORIES 39" (991 mm) 22-1/2" (572 mm) 2-1/2" (64 mm) C L 19-1/16" (48.
1 . An identification tag is permanently mounted on the cabinet. 2 . Plug the unit into a properly grounded receptacle ONLY. Arcing will occur when connecting or disconnecting the unit unless all controls are in the “OFF” position. 3 . Position the unit so the cord is easily accessible i n c a s e o f a n y e m e r g e n c i e s .
T h i s a p p l i a n c e i s i n t e n d e d f o r u s e i n c o m m e r c i a l e stablishments where all operators are familiar with t he purpose, limitations, and associated hazards of this appliance. Operating instructions and warn- ings must be read and understood by all operators a n d u s e r s .
Before Initial Use: Clean appliance with a clean, damp cloth and mild soap solution. Clean and install the pans, shelves and side racks. 1. Turn thermostat to 200°F (93°C) and preheat for 30 minutes.
O p e r a t i o n a n d C a r e M a n u a l • 8. O P E R A T I O N ON/OFF Key Press the ON/OFF key once and the power indicator l i g h t w i l l i l l u m i n a t e . P r e s s a n d h o l d t h e O N / O F F k e y until the LED display turns off (at least three seconds) and power indicator light goes out.
O p e r a t i o n a n d C a r e M a n u a l • 9. Chefs, cooks and other specialized food service p ersonnel employ varied methods of cooking. Proper holding temperatures for a specific food product must be based on the moisture content of the product, product density, volume, and proper serving temperatures.
O p e r a t i o n a n d C a r e M a n u a l • 10. C A R E A N D C L E A N I N G PROTECTING ST AINLESS STEEL SURF ACES I t is important to guard against corrosion in the care of stainless steel sur faces. Harsh, corrosive, or inappropriate chemicals can completely destroy the protective sur face layer of stainless steel.
The cleanliness and appearance of this unit will c ontribute considerably to operating efficiency and savory, appetizing food. Good equipment that is kept clean works better and lasts longer. CLEAN THE UNIT THOROUGHLY A F T E R E A C H U S E 1 . Disconnect unit from power source, and let cool.
O p e r a t i o n a n d C a r e M a n u a l • 12. S A N I T A T I O N Food flavor and aroma are usually so closely related t hat it is difficult, if not impossible, to separate them. There is also an important, inseparable relationship between cleanliness and food flavor.
O p e r a t i o n a n d C a r e M a n u a l • 13. √ S E R V I C E • M A N U A L C O N T R O L THERMOSTAT & PILOT LIGHT SEQUENCE Whenever the thermostat is turned “ON,” the indicator ligh.
O p e r a t i o n a n d C a r e M a n u a l • 14. √ SERVICE • ELECTRONIC CONTROL T R O U B L E S H O O T I N G E r r o r P o s s i b l e C a u s e Code Description/Results Service Required E-10 Air Sensor Fault (shorted) A i r s e n s o r d e f e c t i v e ? S e e f o l l o w i n g p a g e f o r a i r s e n s o r t e s t .
O p e r a t i o n a n d C a r e M a n u a l • 15. SERVICE • ELECTRONIC CONTROL A . N o p o w e r . D i s p l a y w i l l n o t l i g h t . 1 . Verify that power is available at the outlet or junction box. 2 . V e r i f y t h a t t h e c i r c u i t b r e a k e r s w i t c h o n t h e b a c k o f t h e u n i t i s t u r n e d o n .
O p e r a t i o n a n d C a r e M a n u a l • 16. MANUAL CONTROL • SERVICE MODEL 500-E • Manual Control 1 . T O P 1 4 9 8 6 2. TOP MOUNTING SCREWS 9 SC-2425 3 . C O R D A N D P L U G S E T ( 1 2 5 V ) 1 C D - 3 0 2 9 C ORSET: 230V, INTL (TYPE HO7 RN-F) 1 CD-3984 C ORDSET: 208-240V 1 CD-3858 4 .
O p e r a t i o n a n d C a r e M a n u a l • 17..
O p e r a t i o n a n d C a r e M a n u a l • 18. Deluxe Model • Electr onic Control • Service V iews T op Rear V iew Back of Cabinet Cabinet Front Door Gasket E2132GS Handle with Striker HD-200.
O p e r a t i o n a n d C a r e M a n u a l • 19..
O p e r a t i o n a n d C a r e M a n u a l • 20..
O p e r a t i o n a n d C a r e M a n u a l • 21..
O p e r a t i o n a n d C a r e M a n u a l • 22..
All Alto-Shaam equipment i s sold F .O.B. shipping point, and when accepted by the carrier , such s hipments become the property of the consignee. S hould damage occur in shipment, it is a matter between the carrier and the consignee.
An important point after buying a device Alto-Shaam 500-E/Deluxe (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alto-Shaam 500-E/Deluxe yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alto-Shaam 500-E/Deluxe - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alto-Shaam 500-E/Deluxe you will learn all the available features of the product, as well as information on its operation. The information that you get Alto-Shaam 500-E/Deluxe will certainly help you make a decision on the purchase.
If you already are a holder of Alto-Shaam 500-E/Deluxe, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alto-Shaam 500-E/Deluxe.
However, one of the most important roles played by the user manual is to help in solving problems with Alto-Shaam 500-E/Deluxe. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alto-Shaam 500-E/Deluxe along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
