Instruction/ maintenance manual of the product VIRB XE Garmin
Go to page of 16
VIRB ® X/XE Owner’s Manual June 2015 Printed in Taiwan 190-01870-00_0B.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Introduction ..................................................................... 1 Opening the Front Cover ............................................................ 1 Installing a Memory Card ....................................
.
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. It is your responsibility to use the device in a safe manner. Garmin ® will not be responsible for any property damage, injuries or deaths resulting from any use of this device in any activities.
3 Charge the battery completely. Saving Energy While Charging the Device You can turn off the device screen and all other features while charging. 1 Connect your device to an external power source. 2 Hold POWER for 4 to 5 seconds. The screen turns off, and the device goes into a low power, battery charging mode.
À Displays the sensor status and remaining battery capacity. Includes ANT+ ® sensors, Bluetooth ® , Wi ‑ Fi ® , and GPS. Á Displays the remaining memory card space for video recording. Â Displays the remaining memory card space for photos. Ã Displays the field of view, video resolution, and frame rate.
Tall : Enables you to capture a large, vertical viewing area using a 4:3 aspect ratio. This mode is particularly useful for close- up action shots and when using a chest mount. HD Video : Enables you to capture high-speed action shots. 1080p works well as a default setting when you need high- resolution shots.
4 For the best results, mount the device so it does not move while recording. 5 Record a video. Recording a Video Loop Loop recording allows you to record video continuously but save only the most recent video footage. You can select the number of minutes of video to save.
Taking Time-Lapse Photos You can use the time-lapse or extended time-lapse mode to take a series of photos at a set time interval. 1 Hold MENU . 2 Select Photos > Mode . 3 Select Timelapse or Ext. Timelapse . 4 If using extended time-lapse mode, select a start time and duration for the shoot.
After the wireless device is paired, the device status changes to Connected. Connecting an OBD-II Device Your VIRB X/XE device can pair with a compatible Bluetooth ELM327 on-board diagnostics (ODB-II) device to record automotive data from your OBD-II compliant vehicle.
Device Information System Settings NOTICE To prevent damage to the device in wet conditions, you must disable the external microphone setting when the device is not connected to a USB cable. Hold MENU , and select System . GPS : Enables the device to receive GPS satellite signals.
Operating temperature range From -20º to 45ºC (from -4º to 113ºF) Charging temperature range From 0º to 45°C (from 32º to 113°F) Storage temperature range From -40º to 85ºC (from -40º to 185ºF) Radio frequency/ protocol 2.4 GHz ANT+ wireless communications protocol Wi ‑ Fi IEEE 802.
Index A accessories 6 , 9 ANT+ sensors 2 , 3, 6 forgetting 6 pairing 6 B battery 8 charging 1 , 2 installing 1 life 9 Bluetooth technology 3 , 6, 7 C cadence 6 camera.
.
www.garmin.com/support +43 (0) 820 220230 + 32 2 672 52 54 0800 770 4960 1-866-429-9296 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 .
An important point after buying a device Garmin VIRB XE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin VIRB XE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin VIRB XE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin VIRB XE you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin VIRB XE will certainly help you make a decision on the purchase.
If you already are a holder of Garmin VIRB XE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin VIRB XE.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin VIRB XE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin VIRB XE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
