Instruction/ maintenance manual of the product GPSMAP 2110 Garmin
Go to page of 106
GPSMAP ® O w n e r ’ s M a n u a l 2106/2110.
© 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA T el. (913) 397.8200 or (800) 800.1020 Fax (913) 397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Ind ust ria l Es tat e, Rom sey , SO 51 9DL , U K T el.
GPSMAP 2106/21 10 Owner ’s Manual i I ntroductIon > A bout thIs M AnuAl And M AnuAl c onventIons I ntroductIon Thank you for choosing the Garmin ® GPSMAP ® 2106/21 10. The GPSMAP 2106/21 10 uses the proven performance of Garmin GPS and full-featured mapping to create an unsurpassed marine Multi-Function Display (MFD).
ii GPSMAP 2106/21 10 Owner ’s Manual I ntroductIon > t Able of c ontents t able of c ontents Introduction ............................................................................................... i Installing Y our GPSMAP 2106/21 10 .......
GPSMAP 2106/21 10 Owner ’s Manual iii I ntroductIon > t Able of c ontents Map Split Page .............................................................................................. 39 Compass Page ..............................................
iv GPSMAP 2106/21 10 Owner ’s Manual I ntroductIon > t Able of c ontents Appendix ................................................................................................ 82 Specications ................................................
Product Registration Help us better support you by completing our online registration today! Connect to our W eb site at www .garmin.com/registration/ . Use this area to record the serial number (8-digit number located on the back of the GPSMAP 2106/21 10) in case your GPSMAP 2106/21 10 needs service.
vi GPSMAP 2106/21 10 Owner ’s Manual I ntroductIon > w ArnIngs Failure to avoid the following potentially hazardous situations could r esult in an accident or collision r esulting in death or serious injury .
GPSMAP 2106/21 10 Owner ’s Manual 1 g ettIng s t Arted > u nIt o vervIew 15)4 %.4%2 -!2+ 0 !'% &).$ !$* -%.5 $! 4 ! #.&' .!6 -/" !"# $%& '() *+, -.
2 GPSMAP 2106/21 10 Owner ’s Manual g ettIng s t Arted > u sIng the gPsMAP 2106/21 10 K eyP Ad Using the GPSMAP 2106/21 10 Keypad 15)4 %.4%2 -!2+ 0 !'% &).$ !$* -%.5 $ ! 4 ! #.&' .! 6 -/" !"# $%& '() *+, -.
GPSMAP 2106/21 10 Owner ’s Manual 3 g ettIng s t Arted > u sIng the gPsMAP 2106/21 10 K eyP Ad Using Soft Keys Soft keys are located along the bottom of the display and are used as shortcuts to select the most commonly used options for the selected page, window , or tab.
4 GPSMAP 2106/21 10 Owner ’s Manual g ettIng s t Arted > t urnIng on the gPsMAP 2106/21 10 T urning on the GPSMAP 2106/21 10 Before you turn on the GPSMAP 2106/21 10, make sure the unit and GPS 17 antenna are correctly installed on your vessel according to the instructions in the GPSMAP 2106/21 10 & GPS 17 Installation Instructions .
GPSMAP 2106/21 10 Owner ’s Manual 5 g ettIng s t Arted > I nItIAlIzIng the gPs r eceIver Initializing the GPS Receiver When you turn on the GPSMAP 2106/21 10, a W arning Page appears, showing unit information, network connections (attached devices), and important information regarding the proper use of the unit.
6 GPSMAP 2106/21 10 Owner ’s Manual g ettIng s t Arted > I nItIAlIzIng the gPs r eceIver Receiver Status and Accuracy The Status eld on the Info sub tab shows the receiver status. Current accuracy is shown in the EPE (Estimated Position Error) eld.
GPSMAP 2106/21 10 Owner ’s Manual 7 g ettIng s t Arted > u sIng s IMulA tor M ode Using Simulator Mode Simulator Mode is great for practicing with the unit if you are indoors and satellite signals are not available. When the GPSMAP 2106/21 10 is in Simulator Mode, the GPS receiver is turned off.
8 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > u sIng the gPsMAP 2106/21 10 b asIc o pera tIon Using the GPSMAP 2106/21 10 The advanced keypad system on the GPSMAP 2106/2110 is designed to allow you to select options and enter data quickly and conveniently .
GPSMAP 2106/21 10 Owner ’s Manual 9 b AsIc o PerA tIon > u sIng the gPsMAP 2106/21 10 Selecting Options and Entering Data T o select options and enter data, use the ROCKER to highlight or select an item in a list or a eld on the screen.
10 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > u sIng the gPsMAP 2106/21 10 Using Additional Map Data The GPSMAP 2106/21 10 comes standard with a built-in basemap showing cities, interstates, coastline detail, and U.
GPSMAP 2106/21 10 Owner ’s Manual 1 1 b AsIc o PerA tIon > u sIng the gPsMAP 2106/21 10 As you move the map pointer , the distance and bearing from your present location to the map pointer are shown in the upper -left corner of the map, with the map pointer ’ s location coordinates.
12 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > f IndIng An I teM Finding an Item Press FIND to search for items including waypoints, cities, geographic points, celestial information, tides, and currents. If you pan around on the map window and press FIND , the unit centers its search from the map pointer location .
GPSMAP 2106/21 10 Owner ’s Manual 13 b AsIc o PerA tIon > c reA tIng And u sIng w A yPoInts Creating and Using W aypoints The GPSMAP 2106/21 10 stores up to 4,000 alphanumeric waypoints, each with a user-dened icon, comment, depth, and water temperature.
14 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > c reA tIng And u sIng w A yPoInts T o create a new waypoint from a map feature: create a new waypoint from a map feature: 1. Use the ROCKER to move the map pointer and highlight the map feature you want.
GPSMAP 2106/21 10 Owner ’s Manual 15 b AsIc o PerA tIon > r evIewIng And e dItIng w A yPoInts 3. Press the New W aypoint soft key . The Review W aypoint Page appears with the next available waypoint number and the receiver ’s last known location as the default name and location.
16 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > r evIewIng And e dItIng w A yPoInts T o change the waypoint name: 1. Highlight the waypoint name eld, and press ENTER . 2. Use the ROCKER to enter a new name, and press ENTER . T o change the waypoint symbol: 1.
GPSMAP 2106/21 10 Owner ’s Manual 17 b AsIc o PerA tIon > r evIewIng And e dItIng w A yPoInts Using Waypoint Lists The Points tab on the Main Menu has two sub tabs, User and Proximity , which allows you to manage a large number of waypoints quickly and efciently .
18 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > r evIewIng And e dItIng w A yPoInts T o delete a single waypoint from the User sub tab: 1. Use the ROCKER to highlight the waypoint you want to delete, and then press the Delete W aypoint soft key .
GPSMAP 2106/21 10 Owner ’s Manual 19 b AsIc o PerA tIon > n A vIgA tIng to A d estInA tIon T o add a proximity waypoint: 1. Press the New Alarm soft key on the Proximity sub tab. The Find From Current Position Page appears. 2. Highlight a category , and press ENTER .
20 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > n A vIgA tIng to A d estInA tIon T o Go T o a point: 1. Press NA V . 2. Highlight Go T o Point , and press ENTER . The Find From Current Position Page opens. 3. Highlight W aypoints , and press ENTER .
GPSMAP 2106/21 10 Owner ’s Manual 21 b AsIc o PerA tIon > n A vIgA tIng to A d estInA tIon T racBack allows you to retrace your path using the track log stored in the receiver ’ s memory , which eliminates the need to store waypoints along the way .
22 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > n A vIgA tIng to A d estInA tIon 5. T o change the name of the saved track, highlight the Name eld and press ENTER , make any changes, and press ENTER again.
GPSMAP 2106/21 10 Owner ’s Manual 23 b AsIc o PerA tIon > M An o ver b oArd (Mob) And c reA tIng And u sIng r outes Man OverBoard (MOB) Use the Man OverBoard function to simultaneously mark and set a course to a location for quick response to emergency situations.
24 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > c reA tIng And u sIng r outes Number of available points T o create a new route using the Route list: 1. Press and hold ADJ/MENU to open the Main Menu. 2. Use the ROCKER to highlight the Routes tab.
GPSMAP 2106/21 10 Owner ’s Manual 25 b AsIc o PerA tIon > c reA tIng And u sIng r outes T o stop navigating a route: Press NA V , highlight Stop Navigation on the Navigation menu, and press ENTER .
26 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > c reA tIng And u sIng r outes Deleting a Route Use the Route tab on the Main Menu to delete an individual route or delete all routes. T o delete an individual route: 1. Press and hold ADJ/MENU to open the Main Menu, and then highlight the Routes tab.
GPSMAP 2106/21 10 Owner ’s Manual 27 b AsIc o PerA tIon > c reA tIng And u sIng r outes T o review individual route points on the map: 1. On the Routes tab, highlight the route you want to edit, and press ENTER . The map window opens showing the selected route.
28 GPSMAP 2106/21 10 Owner ’s Manual b AsIc o PerA tIon > c reA tIng And u sIng r outes 4. Use the ROCKER to drag the map pointer to the location where you want to add a route point. 5. Press ENTER to add the point to the route. T o remove a point from a route: 1.
GPSMAP 2106/21 10 Owner ’s Manual 29 b AsIc o PerA tIon > c reA tIng And u sIng r outes Planning Routes After you create a route, you can enter information on the Plan Route window such as your speed, departure time, fuel ow , and departure date so your GPSMAP 2106/21 10 can estimate information about your trip.
30 GPSMAP 2106/21 10 Owner ’s Manual M AIn P Ages > o vervIew M aIn p aGes The GPSMAP 2106/21 10 has four main pages that are always available: Map Page, Map Split Page, Compass Page, and Highway Page.
GPSMAP 2106/21 10 Owner ’s Manual 31 M AIn P Ages > c onfIgurIng M AIn P Ages Conguring Main Pages Use the Conguration window to customize each main page to t your navigational needs.
32 GPSMAP 2106/21 10 Owner ’s Manual M AIn P Ages > c onfIgurIng M AIn P Ages T o change the size of the Digital data elds: 1. Press and hold DA T A/CNFG to open the Conguration window . 2. Using the ROCKER , highlight the Digital 1 or Digital 2 adjustment slider , and press ENTER .
GPSMAP 2106/21 10 Owner ’s Manual 33 M AIn P Ages > u sIng f unctIon w Indows Using Function Windows Y ou can add a second function window to the Map Split Page. Active window Map Split Page with Highway Page T o switch between function windows on a main page: 1.
34 GPSMAP 2106/21 10 Owner ’s Manual M AIn P Ages > M AP P Age V iewing a Main Page in Full-Screen Mode Use the DA T A key to view the main page in full-screen mode, without functions, the status bar , or Digital Data elds. Press DA T A again to return to the previous view .
GPSMAP 2106/21 10 Owner ’s Manual 35 M AIn P Ages > M AP P Age Use the Up and Down keys and the ROCKER to select zoom ranges and move the map pointer . T wo basic map operating modes, Position mode and Pointer mode, determine what cartography (map data) is shown on the Map Page.
36 GPSMAP 2106/21 10 Owner ’s Manual M AIn P Ages > M AP P Age Cartography The GPSMAP 2106/21 10 has a built-in worldwide database, with more detailed coverage available through the use of optional BlueChart or MapSource data. The unit shows cartography as long as chart information is available for the selected range.
GPSMAP 2106/21 10 Owner ’s Manual 37 M AIn P Ages > M AP P Age Map Page Options The Map Page provides access to functions and features relating to the Map Page (or Map function window) using the ADJ key and soft key options. The available options are: Measure (Distance) , Hide (Show) Detail , and Setup .
38 GPSMAP 2106/21 10 Owner ’s Manual M AIn P Ages > M AP P Age T o hide (show) map details: Press the Show Detail soft key to show map details; press the Hide Detail soft key to hide map details.
GPSMAP 2106/21 10 Owner ’s Manual 39 M AIn P Ages > M AP s PlIt P Age Map Split Page Use the Map Split Page to view two pages at the same time. Y ou can show two different views of the Map Page, or to show a split view of the Map and Highway pages.
40 GPSMAP 2106/21 10 Owner ’s Manual M AIn P Ages > c oMP Ass P Age Compass Page The GPSMAP 2106/21 10 features two different navigation pages: Compass and Highway . Whenever you are following a route or TrackBack, the Compass Page guides you to your destination with digital readouts and a compass display , which includes a Bearing Pointer .
GPSMAP 2106/21 10 Owner ’s Manual 41 M AIn P Ages > h Ighw A y P Age Highway Page The Highway Page provides 3-D graphic steering guidance to a destination waypoint, placing greater emphasis on the straight-line course, and the distance and direction you are off course.
42 GPSMAP 2106/21 10 Owner ’s Manual M AIn P Ages > u ser P Age 1 And u ser P Age 2 Showing or Hiding Cartography When using BlueChart g2 data, you can view the map on the Highway Page. T o view the map on the Highway Page: 1. Press the Show Map soft key to show the map on the Highway Page.
GPSMAP 2106/21 10 Owner ’s Manual 43 M AIn M enu > gPs t Ab M aIn M enu The Main Menu provides access to various waypoint, system, navigation and interface management, and setup menus in an easy-to-use tab format. The Main Menu is accessible from any page by pressing ADJ/MENU .
44 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > t Ide t Ab T ide T ab Use the T ide tab to view tide and current information. The T ide tab contains two sub tabs: T ide and Current. Tide Sub T ab The T ide sub tab contains a graphical chart that shows T ide Station information in a 24-hour span starting at midnight.
GPSMAP 2106/21 10 Owner ’s Manual 45 M AIn M enu > t Ide t Ab T o select the Tide Station nearest to your location: 1. Highlight the For eld, and press ENTER to open the Find T ides Page. 2. Highlight Current Position , and press ENTER to open the Find Near Current Position Page.
46 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > t Ide t Ab Current Sub T ab The Current sub tab shows information for currents in a 24-hour span, starting at midnight. Y ou can choose from different dates and more than 3,000 Current Stations around the U.
GPSMAP 2106/21 10 Owner ’s Manual 47 M AIn M enu > c elestIAl t Ab T o select a Current Station from a map location: 1. Highlight the For eld, and press ENTER to open the Find Currents Page. 2. Highlight Map Position , and press ENTER to open the Find Near Current Position Page.
48 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > t rIP t Ab T o view celestial information for a different location: 1. On the Celestial tab, highlight the At eld, and press ENTER .
GPSMAP 2106/21 10 Owner ’s Manual 49 M AIn M enu > P oInts t Ab Points T ab The Points tab contains two sub tabs, User and Proximity , which allow you to manage a large number of waypoints quickly and efciently .
50 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > r outes t Ab And t rAcKs t Ab Routes T ab The Routes tab contains a list of available routes. See the “ Creating and Using Routes ” section beginning on page 23 for more information about creating routes.
GPSMAP 2106/21 10 Owner ’s Manual 51 M AIn M enu > t rAcKs t Ab The following settings are available: • Record Mode —allows you to select one of three track recording options: • Off —No track log is recorded. If you select Off , you cannot use the T racBack feature.
52 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > dsc (d IgIt Al s electIve c AllIng ) t Ab DSC (Digital Selective Calling) T ab Use the DSC tab to control and set up DSC features on the GPSMAP 2106/2110. DSC uses marine VHF radio and GPS technologies to transmit and receive location information.
GPSMAP 2106/21 10 Owner ’s Manual 53 M AIn M enu > dsc (d IgIt Al s electIve c AllIng ) t Ab T o review a call or log entry: 1. From the DSC tab, highlight the Call List or Log sub tab. 2. Press up or down on the ROCKER to highlight the call you want to review .
54 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > c Ard t Ab Setting Up DSC Use the DSC Setup sub tab to turn DSC on and off. If you have more than one chartplotter and you only want DSC to show on one chartplotter , turn off DSC on all units but one.
GPSMAP 2106/21 10 Owner ’s Manual 55 M AIn M enu > M essAges t Ab T o transfer data to or from a data card: 1. Insert the data card. If there is already user data on the card, highlight Manage User Card , and press ENTER . The Main Menu appears with the Card tab selected.
56 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > A lArMs t Ab T o view detailed information: Highlight a message, and press ENTER . A window opens, showing detailed information for the selected message. Alarms T ab Use the Alarms tab to dene alarm settings.
GPSMAP 2106/21 10 Owner ’s Manual 57 M AIn M enu > A lArMs t Ab System Alarms Use the System sub tab to set alarms for the system clock, batteries, and GPS accuracy . The System sub tab contains the following alarms: • Clock —provides an alarm for the system clock.
58 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > s ysteM t Ab Sonar Alarms* Use the Sonar sub tab to set sonar alarms, including shallow or deep water , water temperature, and sh. • Shallow W ater/Deep W ater —sets an alarm to sound when you enter an area of specied depth that is too shallow or too deep.
GPSMAP 2106/21 10 Owner ’s Manual 59 M AIn M enu > s ysteM t Ab • Beeper —controls the audible beep. Select Off , Alarms Only (sounds for alarms/messages), or Key and Alarm (sounds for key presses and alarms/messages). • Language —sets the language for the unit’ s on-screen text.
60 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > s ysteM t Ab The following settings are available: • Position Format —used to change the coordinate system in which a given location reading appears.
GPSMAP 2106/21 10 Owner ’s Manual 61 M AIn M enu > s ysteM t Ab your present location and provides magnetic north heading references based on the variation you enter . W ARNING: If you select User Mag V ar , you must periodically update the magnetic variation as your location changes.
62 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > s ysteM t Ab Port 1 • Garmin Data T ransfer —the proprietary format used to upload or download MapSource data, exchange waypoint, route, track, and proximity data with a computer or another Garmin unit.
GPSMAP 2106/21 10 Owner ’s Manual 63 M AIn M enu > s ysteM t Ab Use the Advanced NMEA Setup Page to turn the GPS status (GSA, GSV), W aypoint/Route (WPL, R TE), and the Garmin proprietary sentences on or off. Check any other equipment’ s owners manual to see what sentences are required to be enabled for functionality .
64 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > n etworK t Ab And P Ages t Ab Network T ab The Network tab shows all devices connected to your GPSMAP 2106/2110, and the status of each. Y ou can assign a name or identier to each device. T o check the status of a device: Use the ROCKER to highlight the device.
GPSMAP 2106/21 10 Owner ’s Manual 65 M AIn M enu > M AP t Ab T o add a page to the page sequence: 1. Press the Add Page soft key . 2. Highlight the page you want to add in the Unused Pages list, and press ENTER . The page is added to the Pages list and appears on the Pages menu when you press the ADJ key .
66 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > M AP t Ab Prefs Sub T ab Use the Prefs sub tab to select map preferences. • Map Outlines —turns coverage boxes on or off for BlueChart/MapSource data. • Symbol Set —controls the navaid symbol set: • NOAA —all maps are drawn using a symbol set similar to NOAA/NIMA.
GPSMAP 2106/21 10 Owner ’s Manual 67 M AIn M enu > M AP t Ab Detail Sub T ab Use the Detail sub tab to control the amount of detail for charts, waypoints, active routes, T ide Stations, services, saved tracks, and track logs shown on the Map Page.
68 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > M AP t Ab Nav Sub T ab Use the Nav sub tab to show or hide certain navigational features on the Map Page and the scale at which they appear . The Nav sub tab contains the following options: • AutoZoom —toggles the automatic zoom on or off.
GPSMAP 2106/21 10 Owner ’s Manual 69 M AIn M enu > M AP t Ab AIS Sub T ab AIS (Automatic Identication System) alerts you to area trafc. AIS provides ship IDs, position, course, and speed for ships equipped with a transponder within range.
70 GPSMAP 2106/21 10 Owner ’s Manual M AIn M enu > t eMP (t eMPerA ture ) t Ab 3. Press the Off soft key to select or hide the map family , or press the On soft key to show the map family . The map appears on the Map Page when a check mark appears in the box adjacent to the map.
GPSMAP 2106/21 10 Owner ’s Manual 71 M AIn M enu > s onAr t Ab And h Ighw A y t Ab Sonar T ab The Sonar tab contains setup options for the Sonar Page. See the “Using Sonar” section on page 72 for more information. Highway T ab Use the Highway tab to select whether waypoints and tracks are shown on the Highway Page.
72 GPSMAP 2106/21 10 Owner ’s Manual u sIng s onAr > u nderst AndIng s onAr u sInG s onar This section covers the additional options for the GPSMAP 2106/2110 when used with a GSD 20, GSD 21, or GSD 22 Sounder Module.
GPSMAP 2106/21 10 Owner ’s Manual 73 u sIng s onAr > u nderst AndIng s onAr Understanding the Sonar Display One of the rst things to understand about sonar is that the transducer sends a beam down to the bottom of the water , much like the beam of a ashlight.
74 GPSMAP 2106/21 10 Owner ’s Manual u sIng s onAr > s onAr P Age Sonar Page The Sonar Page is where your GPSMAP 2106/21 10 becomes a powerful shnder/asher .
GPSMAP 2106/21 10 Owner ’s Manual 75 u sIng s onAr > s onAr P Age Conguring the Sonar Page Y ou can customize the Sonar page to t your navigational needs See “ Conguring Main Pages ” on page 31 for more information. T o add or remove functions on the Sonar Page: 1.
76 GPSMAP 2106/21 10 Owner ’s Manual u sIng s onAr > s onAr P Age Using the Sonar Adjustment Menu Use the Sonar adjustment menu to access the settings and features most commonly used on the Sonar Page. T o select an adjustment option from the Sonar Page: 1.
GPSMAP 2106/21 10 Owner ’s Manual 77 u sIng s onAr > s onAr P Age • Frequency —only appears when using a dual frequency transducer . This allows you to choose a sonar operation frequency . Y ou can choose 200 kHz , 50 kHz or Dual frequency (to alternate between the two frequencies).
78 GPSMAP 2106/21 10 Owner ’s Manual u sIng s onAr > s onAr t Ab Using the Pointer on the Sonar Page Y ou can display the pointer (arrow) to reference sonar items and mark underwater waypoints. This makes it easier to nd and use an object such as a stump as a future shing location.
GPSMAP 2106/21 10 Owner ’s Manual 79 u sIng s onAr > s onAr t Ab General Sub T ab Use the General sub tab to select the water type, depth number , automatic scroll speed limit, scale, keel offset, and transducer type.
80 GPSMAP 2106/21 10 Owner ’s Manual u sIng s onAr > s onAr t Ab T o calibrate the water speed: 1. On the Sonar tab, press the Cal W ater Spd soft key . 2. Bring the boat to cruising speed. Both the top ground and uncalibrated water speeds are shown at the bottom of the calibration window .
GPSMAP 2106/21 10 Owner ’s Manual 81 u sIng s onAr > s onAr t Ab Water T emp Sub T ab The W ater T emp sub tab enables you to control the temperature log (if your boat is equipped with a temperature transducer/sensor). The graph reads from right to left, so that the most recent temperature measured appears on the far -right side of the log.
82 GPSMAP 2106/21 10 Owner ’s Manual A PPendIx > s PecIfIcA tIons a ppendIx Specications Physical Specications Size: GPSMAP 2106: 6.5" H x 10.3" W x 3.3" D (16.5 x 26.2 x 8.4 cm) GPSMAP 2210: 8.8" H x 13.1" W x 3.0" D (22.
GPSMAP 2106/21 10 Owner ’s Manual 83 A PPendIx > I nst AllIng And r eMovIng d A t A c Ards Installing and Removing Data Cards The GPSMAP 2106/21 10 uses optional Garmin BlueChart ® and MapSource ® data cards. Y ou can use optional preprogrammed BlueChart g2 ™ data cards.
84 GPSMAP 2106/21 10 Owner ’s Manual A PPendIx > w hA t Is wAAs/egnos? What is W AAS/EGNOS? The W ide Area Augmentation System (W AAS) is an F AA-funded service to improve the overall integrity of the GPS signal for users in North America. In Europe, W AAS is referred to as EGNOS.
GPSMAP 2106/21 10 Owner ’s Manual 85 A PPendIx > d IgIt Al s electIve c AllIng (dsc) Digital Selective Calling (DSC) When your GPSMAP 2106/21 10 is connected to a VHF radio with DSC support, the GPS unit displays a Call List, Log, and a Directory to store incoming information received from another user ’ s DSC capable VHF/GPS combination.
86 GPSMAP 2106/21 10 Owner ’s Manual A PPendIx > lorAn td s ysteM Federal Users in the United States Federal users can obtain MMSI assignments from their agency radio spectrum management ofce. These procedures are currently under review by the NTIA (National T elecommunications and Information Administration).
GPSMAP 2106/21 10 Owner ’s Manual 87 A PPendIx > c ArIng for the gPsMAP 2106/21 10 the GPSMAP 2106/21 10 unit does not rely on the LORAN signal for navigation, it can reference a different GRI chain or secondary stations and still navigate to the location stored in memory .
88 GPSMAP 2106/21 10 Owner ’s Manual A PPendIx > n A vIgA tIon t erMs Navigation T erms A vg Speed —the average of all second-by-second speed readings since the last reset. Bearing (BRG) —the compass direction from your current location to a destination.
GPSMAP 2106/21 10 Owner ’s Manual 89 A PPendIx > n A vIgA tIon t erMs Sunset —the time at which the sun sets on this day . Time Of Day —the current time. Time T o —the estimated time required to reach a Go T o destination or the next waypoint in a route.
90 GPSMAP 2106/21 10 Owner ’s Manual A PPendIx > M essAges And A lArMs Messages and Alarms The GPSMAP 2106/21 10 uses an on-screen message system to notify you of events and alert you to problems. Press QUIT to acknowledge a message. Accuracy Alarm —the GPS accuracy has fallen outside of the user-set value.
GPSMAP 2106/21 10 Owner ’s Manual 91 A PPendIx > M essAges And A lArMs Not All Maps Fit, Some Maps will not be drawn —the maximum number of individual maps on the data card was exceeded. Off Course Alarm —you exceeded the specied off-course distance.
92 GPSMAP 2106/21 10 Owner ’s Manual A PPendIx > o PtIonAl A ccessorIes Optional Accessories The following accessories are designed to enhance the operation of your GPSMAP 2106/21 10 chartplotter . T o obtain replacement parts and optional accessories, contact your Garmin Dealer , Garmin Product Support in the U.
GPSMAP 2106/21 10 Owner ’s Manual 93 A PPendIx > l IMIted w ArrAnty Limited W arranty This Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. W ithin this period, Garmin will at its sole option repair or replace any components that fail in normal use.
94 GPSMAP 2106/21 10 Owner ’s Manual A PPendIx > fcc c oMPlIAnce And d eclArA tIon of c onforMIty (doc) FCC Compliance The GPSMAP 2106/21 10 complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE.
GPSMAP 2106/21 10 Owner ’s Manual 95 I ndex I ndex Symbols 200 kHz frequency 72 2X zoom 77 4X zoom 77 50 kHz frequency 72 A A-scope 77 accessories 92 accuracy 6 accuracy circle 68 acquiring satellit.
96 GPSMAP 2106/21 10 Owner ’s Manual I ndex L labels 67 language 59 leg distance 29 leg time 29 limited warranty 93 log, temperature 81 log and graph scale 81 log duration 70 LORAN TD 86–87 settin.
GPSMAP 2106/21 10 Owner ’s Manual 97 I ndex adjustment menu 76 conguring 75 Sonar tab 78–81 sound waves 72 source, GPS 6 specications 82 speed lter 58 speed units 60 status bar 3, 5 stora.
For the latest fr ee software updates (excluding map data) thr oughout the life of your Garmin products , visit the Garmin Web site at www .garmin.com. © 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
An important point after buying a device Garmin GPSMAP 2110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin GPSMAP 2110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin GPSMAP 2110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin GPSMAP 2110 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin GPSMAP 2110 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin GPSMAP 2110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin GPSMAP 2110.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin GPSMAP 2110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin GPSMAP 2110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
