Instruction/ maintenance manual of the product 1200-UP Alto-Shaam
Go to page of 51
MN-29423 • 07/12 printed i n u . s . a . Holding Cabinet Deluxe or Simple Control Models : 300-S 500-S 750-S 1000-S 1200-S 1000-UP 1200-UP • INSTALLATION • OPERATION • MAINTENANCE 1200-UP W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.
Delivery ......................................... 1 Unpacking ....................................... 1 Safety Procedures and Precautions ................... 2 Installation Installation Requirements ......................... 3 Clearance Requirements .
holding cabinets • installation / operation / service manual - p g . 1 DELIVERY This Alto-Shaam appliance has been thoroughly tested and inspected to ensure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier.
holding cabinets • installation / operation / service manual - p g . 2 CAUTION Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored.
holding cabinets • installation / operation / service manual - p g . 3 INSTALLATION SITE INSTALLATION The Alto-Shaam Holding Cabinet must be installed in a location that will permit the oven to function for its intended purpose and to allow adequate clearance for ventilation, proper cleaning, and maintenance access.
holding cabinets • installation / operation / service manual - p g . 4 INSTALLATION WEIGHTS AND CAPACITIES Model 300-S Model 500-S El e ct ric al Conn ec tio n Sh ow n with op tio nal bum per 58-1 1.
holding cabinets • installation / operation / service manual - p g . 5 28-9/16 " ( 726mm) 56-7/8" (1444mm) 34-7/8" (886mm) Pass-Through Option Electrical Connection 53-15/16" (13.
holding cabinets • installation / operation / service manual - p g . 6 INSTALLATION 56-3/16" (1427mm) 44" ( 11 17mm) with 5" (127mm) casters* 6-13/16" (173mm) 40- 11 /16" (1.
holding cabinets • installation / operation / service manual - p g . 7 34-1/2" (876mm) 56-1/4" (1427mm) 27-5/8" (701mm) Shown with optional bumper Electrical Connection 25-13/16".
holding cabinets • installation / operation / service manual - p g . 8 INSTALLATION Shown with universal pan slides. Two (2) slides needed per pan. UNIVERSAL PAN SLIDES Side Rail 1011741 Universal P.
holding cabinets • installation / operation / service manual - p g . 9 CAUTION Pass-through models with same side door hinging must be installed with flanged feet bolted to the floor to avoid tipping hazards.
holding cabinets • installation / operation / service manual - p g . 1 0 INSTALLATION STACKING INSTRUCTIONS 1) If the two appliances were shipped together from the factory, the top unit will have the casters already removed. A stacking kit will be included with the shipment.
holding cabinets • installation / operation / service manual - p g . 1 1 SITE INSTALLATION INSTALLATION A number of adjustments are associated with initial installation and start-up. It is important that these adjustments be conducted by a qualified service technician.
holding cabinets • installation / operation / service manual - p g . 1 2 SITE INSTALLATION INSTALLATION DRIP TRAY INSTALLATION INSTRUCTIONS - 500, 750, 1000, 1200 WARNING FAILURE TO PROPERLY INSTALL THE DRIP TRAY CAN OR WILL CAUSE MAJOR EQUIPMENT DAMAGE AND WILL RESULT IN A LEAKAGE HAZARD THAT CAN CAUSE PERSONAL INJURY.
holding cabinets • installation / operation / service manual - p g . 1 3 1. An identification tag is permanently mounted on the cabinet. 2. Plug cabinet into a properly grounded receptacle ONLY, positioning the unit so the power supply cord is easily accessible in case of an emergency.
holding cabinets • installation / operation / service manual - p g . 1 4 ELECTRICAL INSTALLATION DANGER ENSURE POWER SOURCE MATCHES VOLTAGE IDENTIFIED ON APPLIANCE RATING TAG. CAUTION THIS SECTION IS PROVIDED FOR THE ASSISTANCE OF QUALIFIED SERVICE TECHNICIANS ONLY AND IS NOT INTENDED FOR USE BY UNTRAINED OR UNAUTHORIZED SERVICE PERSONNEL .
holding cabinets • installation / operation / service manual - p g . 1 5 USER INFORMATION INSTALLATION USER SAFETY INFORMATION This appliance is intended for use in commercial establishments where all operators are familiar with the purpose, limitations, and associated hazards of this appliance.
holding cabinets • installation / operation / service manual - p g . 1 6 1 . PREHEAT AT 200°F (93°C) FOR 30 MINUTES BEFORE LOADING FOOD. Push power switch to “ON” position. The unit will begin operating at the previous set temperature. 2. Press the Up or Down Arrow Keys to 200°F (93°C).
holding cabinets • installation / operation / service manual - p g . 1 7 DELUXE CONTROL OPTION OPERATION Deluxe Control DELUXE CONTROL SET-UP ON/OFF KEY Press the ON/OFF key once and the power indicator light will illuminate. Press and hold the ON/OFF key until the LED display turns off (at least three seconds) and power indicator light goes out.
holding cabinets • installation / operation / service manual - p g . 1 8 SIMPLE AND DELUXE CABINETS With the addition of a pan of water, warming cabinets can be used for proofing dough. A water reservoir pan (#1775) and pan cover (#1774) is available as an option from Alto-Shaam.
holding cabinets • installation / operation / service manual - p g . 1 9 OPERATION Timer Programming Information 1. Turn On/Off Control Key OFF. Press the On/Off Key until the display turns OFF (at least 3 seconds) and On/Off Key’s P ower Indicator Light goes out.
holding cabinets • installation / operation / service manual - p g . 2 0 GENERAL HOLDING GUIDELINES Chefs, cooks and other specialized food service personnel employ varied methods of cooking.
holding cabinets • installation / operation / service manual - p g . 2 1 PROTECTING STAINLESS STEEL SURFACES It is important to guard against corrosion in the care of stainless steel surfaces. Harsh, corrosive, or inappropriate chemicals can completely destroy the protective surface layer of stainless steel.
holding cabinets • installation / operation / service manual - p g . 2 2 CLEAN THE HOLDING CABINET DAILY : 1. Disconnect unit from power source, and let cool. 2. Remove all detachable items such as shelves, side racks, and drip pan. Clean these items separately with a good grease solvent or commercial detergent.
holding cabinets • installation / operation / service manual - p g . 2 3 SANITATION Food fl avor and aroma are usually so closely r elated that it is diffi cult, if not impossible, to separate them. There is also an important, inseparable relationship between cleanliness and food fl avor .
holding cabinets • installation / operation / service manual - p g . 2 4 THERMOSTAT ACCURACY SERVICE The electronic thermostat is a precise instrument and is designed to offer trouble free service.
holding cabinets • installation / operation / service manual - p g . 2 5 Code Description Possible Cause E-10 Cavity air sensor shorted Cavity air sensor reading < 5°F. Verify sensor integrity. See sensor test instructions below. E-11 Cavity air sensor open Cavity air sensor reading > 517°F.
holding cabinets • installation / operation / service manual - p g . 2 6 SERVICE SINGLE COMPARTMENT - 300-S 5 9 6 1 28 15 23 16 21 19 20 18 17 24 7 27 4 2 25 26 8 10 14 13 12 3 16 22 11 16 Part numbers and drawings are subject to change without notice.
holding cabinets • installation / operation / service manual - p g . 2 7 SERVICE SINGLE COMPARTMENT - 500-S, 750-S, 1000-S (1000-S Shown) Part numbers and drawings are subject to change without notice.
holding cabinets • installation / operation / service manual - p g . 2 8 SERVICE MODEL > 500-S 750-S 1000-S 1200-S ITEM DESCRIPTION PART NO. QTY PART NO.
holding cabinets • installation / operation / service manual - p g . 2 9 SERVICE DOUBLE COMPARTMENT - 1000-UP, 1200-UP (1000-UP SHOWN) Part numbers and drawings are subject to change without notice.
holding cabinets • installation / operation / service manual - p g . 3 0 SERVICE MODEL > 1000-UP 1200-UP ITEM DESCRIPTION PART NO. QTY PART NO. QTY 1 SCREW, 8-32 X 1/4" PHIL SC-2459 30 SC-24.
holding cabinets • installation / operation / service manual - p g . 3 1 ELECTRONIC COMPONENTS - 300-S SERVICE 8 2 3 5 9 10 11 12 13 14 15 16 21 20 17 3 19 18 7 6 43 1 Part numbers and drawings are subject to change without notice. ITEM DESCRIPTION PART NO.
holding cabinets • installation / operation / service manual - p g . 3 2 DETAIL B 13 14 15 16 B 1 12 4 5 3 2 11 9 6 7 10 8 ITEM DESCRIPTION PART NO. QTY ITEM DESCRIPTION PART NO.
holding cabinets • installation / operation / service manual - p g . 3 3 SERVICE CAUTION THIS SECTION IS PROVIDED FOR THE ASSISTANCE OF QUALIFIED SERVICE TECHNICIANS ONLY AND IS NOT INTENDED FOR USE BY UNTRAINED OR UNAUTHORIZED SERVICE PERSONNEL . CABLE HEATING SERVICE KITS DANGER DISCONNECT UNIT FROM POWER SOURCE BEFORE CLEANING OR SERVICING.
holding cabinets • installation / operation / service manual - p g . 3 4.
holding cabinets • installation / operation / service manual - p g . 3 5.
holding cabinets • installation / operation / service manual - p g . 3 6.
holding cabinets • installation / operation / service manual - p g . 3 7 .
holding cabinets • installation / operation / service manual - p g . 3 8 .
holding cabinets • installation / operation / service manual - p g . 3 9 .
holding cabinets • installation / operation / service manual - p g . 4 0.
holding cabinets • installation / operation / service manual - p g . 4 1.
holding cabinets • installation / operation / service manual - p g . 4 2.
holding cabinets • installation / operation / service manual - p g . 4 3 .
holding cabinets • installation / operation / service manual - p g . 4 4 .
holding cabinets • installation / operation / service manual - p g . 4 5 .
holding cabinets • installation / operation / service manual - p g . 4 6 .
holding cabinets • installation / operation / service manual - p g . 4 7 .
holding cabinets • installation / operation / service manual - p g . 4 8 .
TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee.
An important point after buying a device Alto-Shaam 1200-UP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alto-Shaam 1200-UP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alto-Shaam 1200-UP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alto-Shaam 1200-UP you will learn all the available features of the product, as well as information on its operation. The information that you get Alto-Shaam 1200-UP will certainly help you make a decision on the purchase.
If you already are a holder of Alto-Shaam 1200-UP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alto-Shaam 1200-UP.
However, one of the most important roles played by the user manual is to help in solving problems with Alto-Shaam 1200-UP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alto-Shaam 1200-UP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center