Instruction/ maintenance manual of the product 5000 Garmin
Go to page of 2
RF Remote owner’ s manual For Use with GPSMAP 4000/5000 Series Chartplotters © 2007 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual .
Introduction The 4000/5000 Series RF Remote is for use with the following Garmin chartplotters: GPSMAP 4008 GPSMAP 5008 GPSMAP 4012 GPSMAP 5012 GPSMAP 4208 GPSMAP 5208 GPSMAP 4212 GPSMAP 5212 The remote is used to control the 4000/5000 screens.
An important point after buying a device Garmin 5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin 5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin 5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin 5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin 5000 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin 5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin 5000.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin 5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin 5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
