Instruction/ maintenance manual of the product 190-0172_0B Garmin
Go to page of 10
Pro Trashbreaker Owner’s Manual March 2014 190-01726-00_0B Printed in Taiwan.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Pro Trashbreaker System Before you can use the Pro Trashbreaker system, you must set up the devices.
Charging the Collar NOTICE To prevent corrosion, thoroughly dry the contacts on the collar and the surrounding area before connecting the charging clip. You should fully charge the battery before you use the device for the first time or whenever the battery is low ( Checking the Battery Level ).
4 Wiggle the device to work the contact points through the dog's coat. NOTE: The contact points must have contact with the dog's skin to be effective. 5 If the strap is too long, cut off the excess, leaving at least 3 in. (8 cm) to spare. 6 Mark the hole used to fasten the buckle for future reference (optional).
Device Information Pro Trashbreaker Handheld Device Specifications Battery type Rechargeable, replaceable lithium-ion Battery life 60 hours typical use Operating temperature range From -4° to 140°F .
4 Grip the rotary switch connector wires close to the connector, and pull the connector perpendicular to the circuit board to disconnect the rotary switch connector from the device. 5 Remove the two screws from the battery plate. 6 Lift up the battery plate.
When properly installed, the connector plug snaps into the port. 12 Replace the front plate, and replace and tighten the six screws to secure the front plate. 13 Replace the screw securing the VHF antenna to the back plate. 14 Replace the cover over the VHF antenna.
.
www.garmin.com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 (0) 870 8501242 1-866-429-9296 +43 (0) 820 220230 + 32 2 672 52 54 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 .
An important point after buying a device Garmin 190-0172_0B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin 190-0172_0B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin 190-0172_0B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin 190-0172_0B you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin 190-0172_0B will certainly help you make a decision on the purchase.
If you already are a holder of Garmin 190-0172_0B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin 190-0172_0B.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin 190-0172_0B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin 190-0172_0B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
