Instruction/ maintenance manual of the product 130 Garmin
Go to page of 12
GNX ™ 120/130 Owner’s Manual March 2015 Printed in Taiwan 190-01846-00_0A.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Introduction ..................................................................... 1 Device Overview ......................................................................... 1 Unlocking the Controls .................................
.
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview NOTE: Certain functions are available only when the appropriate sensors are connected to the device.
6 Repeat steps 3 through 5 for each additional field you need to change. 7 Select DONE . Configuring the Data Fields Data provided on an instrument page can be shown in various ways depending upon the instrument page that is displayed. 1 Select > CONFIGURE DATA FIELDS .
2 Select an option: • To turn off the beeper, select OFF . • To set the beeper to sound only when alarms are triggered, select ALARMS ONLY . • To set the beeper to sound when the keys are pressed and alarms are triggered, select ON (KEYS AND ALARMS) .
NOTE: If you are unable to see the correct number of instruments listed, it may be caused by a combined network. A combined network must be resolved to control all connected devices with the keypad ( Resolving a Combined Network ). 3 Select the order of the device, and select OK .
RACE : The timer for vessel racing. REL : (RELATIVE HUMIDITY) Absolute, relative to another data field. For example, absolute humidity. RPM : (ENGINE RPM) Engine revolutions per minute from the tachometer. RUD : (RUDDER ANGLE) The rudder relative to another data field.
Data Field Category Available on a Single Function Page? Available on a Two- or Three- Function Page? Graph View Available?* Gauge View Available?** Data Filtering Available? ENGINE VOLTAGE SYSTEM SYS.
Index A automatic scrolling 1 B beeper 2 D data 3 data fields 4 device, registration 4 display settings 3 H heading 2 type 2 I instruments 1 adding pages 1 configuration.
www.garmin.com/support +43 (0) 820 220230 + 32 2 672 52 54 0800 770 4960 1-866-429-9296 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 .
An important point after buying a device Garmin 130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin 130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin 130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin 130 you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin 130 will certainly help you make a decision on the purchase.
If you already are a holder of Garmin 130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin 130.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin 130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin 130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center