Instruction/ maintenance manual of the product 7160-0526-02 Gamber Johnson
Go to page of 8
INST-626 required. Gamber-Johnson spec ifically disclaims any responsibility for the improper use or installation of its products not c on sistent with th e original v ehicle manufactu res specificati.
B300 USB 3.0 DOCKING STATION FEATURE IDENTIFICATION Page 2 of 8 WLAN/GPS Antenna Docking Connector Alignment Pin Video Connection Push Button Lock Front Retainer Interlock Pin Alignment Pin Connector Connector (2)Serial Ports Ethernet Port Docking Handle DC Power or Headphones External Speakers 3.
3. VERIFICATION that no shorts exist in the entire system hazardous sparks resulting in electri cal fires or flying molten metal. CAUTION: If wiring is shorted to the frame, high current conductors can cause prior to the actual install to verify that mounting locations are safe and practical.
information regarding these features. *Refer to the Power Supply and Wiring Instructi ons sections of this manual for further switch position. (bypassing the power switch) and the green LED light is lit regardless of • off to regulate power through the unit.
WIRING INSTRUCTIONS 1-800-456-6868 IMPORTANT: Make sure that you have read this entire section before you begin wiring! • be wired in-line with the supply voltage (V+) to the docking station. If you have any installation questions, pl ease call Gamber-Johnson customer support at • rated at 10 amp, 32 volt AC/DC fast acting.
14 AWG (black wire) J1128 TYPE GPT Panduit #BSN14-C Butt Splice connects to black lead from dock Panduit #BSN14-C Butt Splice connects to red or blue lead from dock Vehicle Battery Ground to Vehicle C.
Docking Handle Figure 5 Figure 6 Figure 4 opened or closed. *Docking station will operate with computer screen computer is powered and ready for use. 4. Boot the computer. If the dock is powered, the added security) (The Push Button latch can be locked for dock until the latch catches (Figure 6).
TROUBLESHOOTING 2. To serve as a reminder to turn off the computer's power switch. 1. To be used for a limited tim e, depending on the computer's battery life.
An important point after buying a device Gamber Johnson 7160-0526-02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gamber Johnson 7160-0526-02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gamber Johnson 7160-0526-02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gamber Johnson 7160-0526-02 you will learn all the available features of the product, as well as information on its operation. The information that you get Gamber Johnson 7160-0526-02 will certainly help you make a decision on the purchase.
If you already are a holder of Gamber Johnson 7160-0526-02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gamber Johnson 7160-0526-02.
However, one of the most important roles played by the user manual is to help in solving problems with Gamber Johnson 7160-0526-02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gamber Johnson 7160-0526-02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
