Instruction/ maintenance manual of the product TNP500/502 Altinex
Go to page of 11
ACCESSORIES MANUAL PART NUMBER: 400-00 91 -005 T NP500/502 Universal Tilt ‘ N P lug ™ I nterconnect B ox USER'S GUIDE.
ACCESSORIES 1 INTRODUCTION Your purchase of the TNP 500 /502 Tilt ‘N Plug™ Interconnect Box is greatly app reciated. We are sure you will find it reliable and simple to use. Superior performance for the right price, backed by solid technical and customer support is what ALTINEX has to offer.
ACCESSORIES 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your T NP5 00/502 Interconnect Box. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your T NP5 00/502 and to prevent fire and shock hazard.
ACCESSORIES 3 equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. • Any changes or modifications to the unit not expressly approved by ALTINEX, Inc.
ACCESSORIES 4 T NP5 00/502 DIMENSIONS 4 Detailed dimensions, tabletop cutout templates and CAD drawings are available on the ALTINEX website at www.altinex.
ACCESSORIES 5 Available Plates Many different plates can be installed on TNP500. In addition to standard plates, any custom plates can be made using blank plates available. Additional description and part numbering is available on Altinex web site www.
ACCESSORIES 6 Final Installation view of TNP 502. Sample configiration with modules installed.
ACCESSORIES 7 DESCRIPTION 5 4: Final Installation view of TNP 502 APPLICATION DIAGRAM 6.
ACCESSORIES 8 MOUNTING DIAGRAM 7 INSTALLATION 88 Step 1 . Cut an opening into the table’s surface . Refer to diagram on Altinex web site www.altinex.com for table cutout requirement s . Note: The table can be 3 inches or thinner in thickness . Always confirm dimensions before cutting to insure that specifications have not changed.
ACCESSORIES 9 Step6 Once you have applied power and connected the proper cables on the bottom of the unit , you may raise the unit. To raise the T NP 5 00/502 into position lift the top by pulling upward at the notch in the top plate . Step 7 . To lower the unit, push on the top of the T NP5 00 until it fits into place.
ACCESSORIES 10 CABLES AND ACCESSORIES 10 Model No. Description VGA MALE TO MALE (HD-15) HIGH RESOLUTION CABLE CB37xxMR xx = available length of 3ft, 6ft, 15ft, 25ft, 50ft, 75ft, 100ft, 1 50ft VGA MALE.
An important point after buying a device Altinex TNP500/502 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex TNP500/502 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex TNP500/502 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex TNP500/502 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex TNP500/502 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex TNP500/502, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex TNP500/502.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex TNP500/502. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex TNP500/502 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
