Instruction/ maintenance manual of the product SW1956CT Altinex
Go to page of 11
SWITCHER MANUAL PART NUMBER: 400 - 0378 - 004 2– IN, 1 – OUT TWISTED PAIR AUTO - SWITCHER USER’S GUIDE SW1956CT.
SWITCHER 400 - 0378 - 004 1 TA BLE OF CONTENTS Page PRECAUTIONS / SAFETY WA RNINGS ................ 2 GENERAL .......................................................... 2 INSTALLATION .................................................. 2 CLEANING .....
SWITCHER 400 - 0378 - 004 2 PRECA UTIONS / SA FETY WA RNINGS 1 Please read this manual carefully before using your SW1956CT Switcher. Keep this manual handy for future reference. These safe ty instructions are to ensure the long life of your SW1956CT and to prevent fire and shock hazard s .
SWITCHER 400 - 0378 - 004 3 AB OUT YOUR SW1956CT 2 SW1956CT 2- In, 1 Out Twisted Pair Auto - Switcher The SW1956CT is a 2 - In, 1 - Out Tw isted Pair Auto - Switcher. The SW1956CT switches automatically up on signal detection, but may also be controlled manually.
SWITCHER 400 - 0378 - 004 4 MECHA NICA L SW1956CT Mate rial 0.1 00 in Al Finish Gray Height 3.00 0 in ( 76 mm) Wi dth 4.38 0 in (111 mm) Depth 1.00 0 in ( 25mm) We ight 0.4 0 lb (0.18 kg) Ship W eight 2.0 0 lb (0.91 kg) T ° Operating 10 ° C- 35 ° C T ° Maximum 50 ° C Humidity 90 % non - condensing MTBF (calculations) 40, 000 hrs (min.
SWITCHER 400 - 0378 - 004 5 PRODUCT DESCRIPTION 4.
SWITCHER 400 - 0378 - 004 6 AP PLICA TION DI AG RA MS 5 DIA GRA M 1 : TYPICA L SETUP DA1931CT SW1956CT DA1930CT DA1930CT ALTINEX includes a remote control switch with the SW1956CT. The remote switch has a 6 ft cable and may used to control the switcher manually.
SWITCHER 400 - 0378 - 004 7 DIA GRA M 2 : INTERNAL VIEW INPUT2 9 VDC, 500 mA 2.5 mm SUPPLY POWER INPUT1 CLOUSURE CONTACT DETECT SIGNAL INPUT2 INPUT1 PAIR TWISTED RJ-45 TWISTED RJ-45 PAIR OUTPUT.
SWITCHER 400 - 0378 - 004 8 INSTA LLING YOUR SW1956CT 6 Step 1. Connect t he A LTINEX power adapter that is supplied with the unit to the power port. CA UTION: The PO WE R port and the INPUT SELECT port use the same connector type. Make sure the power adapter is co nnected to the POW ER port.
SWITCHER 400 - 0378 - 004 9 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found no problems in the supplied SW1956CT unit. H owever, we would like to offer the following suggestions: 8.1 POWER LED IS OFF Cause 1: The pow er adapter is installed wr ong.
SWITCHER 400 - 0378 - 004 10 Solution 3: Bypass the switcher and connect the output of the t ransmitter directly to the input of the receiver. If the display is good, then call ALTINEX at (714) 990 - 2300. If there is still no display, see Cause 4. Cause 4: Cable connections are incorrect.
An important point after buying a device Altinex SW1956CT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex SW1956CT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex SW1956CT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex SW1956CT you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex SW1956CT will certainly help you make a decision on the purchase.
If you already are a holder of Altinex SW1956CT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex SW1956CT.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex SW1956CT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex SW1956CT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
