Instruction/ maintenance manual of the product SW104-130 Altinex
Go to page of 10
SWITCH ER MANUAL PART NUMBER: 400 - 0426 - 006 2- IN VIDEO+ AUDIO TO TWISTED PAIR (TP) OUTPUT, AUTO -SWITCHER/TRANSMITTER USER’S GUIDE SW104 - 130.
SWITCHER 400 - 0426 - 006 1 TA BLE OF CONTENTS Page PRECAUTIONS / SAFETY WA RNINGS ................ 2 GENERAL .......................................................... 2 INSTALLATION .................................................. 2 CLEANING .....
SWITCHER 400 - 0426 - 006 2 PRECA UTIONS / SA FETY WA RNINGS 1 Please read this manual carefully before using your SW104 - 130 Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your SW104 - 130 and to prevent fire and shock hazards.
SWITCHER 400 - 0426 - 006 3 AB OUT YOUR SW104 - 130 2 SW104 - 130 2- In Video+ Audio to TP Output , Auto - Switcher/Transmitter with Local Output The SW104 -1 30 Auto - Switcher is designed to switch between two video+ audio sources.
SWITCHER 400 - 0426 - 006 4 MECHA NICA L SW104 - 130 Material 0.091 in Al Finish Black Height 0.96 0 in (24 mm) Wi dth 4.3 00 in (109 mm) Depth 5.20 0 in (132 mm) We ight 1.0 0 lb (0.45 kg) T ° Operating 10 ° C- 35 ° C T ° Maximum 50 ° C Humidity 90 % non - condensing MTBF (calculations) 40,000 hrs (min.
SWITCHER 400 - 0426 - 006 5 PRODUCT DESCRIPTION 4 AP PLICA TION DI AG RA MS 5 DIA GRA M 1 : TYPICA L SETUP MONITOR OUTPUT VIDEO CONTACT CONTROL OUTPUT POWER COMPONENT INPUT1 AUDIO INPUT1 INPUT2 AUDIO .
SWITCHER 400 - 0426 - 006 6 DIA GRA M 2 : INTERNAL VIEW SW 104-130 CONTROL CH2 CH1 POWER CONTROL CONTROL SWITCH PLUG AND PLAY HOR VER EQ H/W VER HOR RED BLUE GREEN CONTROL PAIR 4 RIGHT LEFT RIGHT LEFT PS RED BLUE GREEN PAIR 2 PAIR 3 PAIR 1 RED BLUE GREEN VER HOR PLUG AND PLAY POWER 2.
SWITCHER 400 - 0426 - 006 7 INSTA LLING YOUR SW104 - 130 6 Step 1. Make sure to use the ALTINEX power adapter supplied with the unit. Connect the power adapter to the power port. The P ower and Input 2 LEDs should turn on. NOTE: Input 2 is the default if there is no signal on I nput 1 and the Control Switch is in the A uto position.
SWITCHER 400 - 0426 - 006 8 TROUBLESHOOTING GUIDE 8 We have carefully tested and found no problems in the supplied SW104 - 130 unit. However, we would like to offer the following suggestions: 8.1 LEDs A RE OFF Cause 1: The pow er adapter is installed wr ong.
SWITCHER 400 - 0426 - 006 9 Cause 3: Signal is bad or missing. Solution 1: Make sure the switcher output is connected to the monitor. If there is still no display, see Sol ution 2. Solution 2: Remove both inputs to the switcher and connect the active signal f ro m the source to Input 2.
An important point after buying a device Altinex SW104-130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex SW104-130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex SW104-130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex SW104-130 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex SW104-130 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex SW104-130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex SW104-130.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex SW104-130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex SW104-130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
