Instruction/ maintenance manual of the product MX2426CV Altinex
Go to page of 11
SWITCHERS MANUAL PART NUMBER: 400-0027-003 PRODUCT REVISION: 1 MX2426CV COURT PC VIEW TRIAL PRESENTATION SWITCHER USER’S GUIDE.
SWITCHERS 1 INTRODUCTION Thank you for purchasing the MX2426CV Court- PC-View Trial Presentation Switcher. We are sure you will find it reliable and simple to use. Superior performance for the right price, backed by solid technical and customer support is what Altinex has to offer.
SWITCHERS 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MX2426CV Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2426CV and to prevent fire and shock hazard.
SWITCHERS 3 • Any changes or modifications to the unit not expressly approved by Altinex, Inc. could void the user’s authority to operate the equipment.
SWITCHERS 4 Rise/Fall Time ( ns) 2.4 Impedance 75 Ohms Output Sync Signals Composite Sync TTL(+/-) Sync on Green -0.3V Impedance 22 Ohms Frequency Compatibility Horizontal 15-200 kHz Vertical 30-190 H.
SWITCHERS 5 4.1 INPUTS/OUTPUTS All inputs and outputs of the MX2426CV use 15 pin HD female connectors. This allows easy installation of the system with PC computers and VGA type monitors. 4.2 COMPUTER INPUTS The MX2426CV offers two computer inputs with buffered local monitor outputs.
SWITCHERS 6 APPLICATION DIAGRAM 5 INSTALLATION 6 Step 1. Make sure that the power input is set to the proper AC voltage for your country. An incorrect setting can result in unit damage not covered by warranty. Step 2. Connect the power cord to the unit and plug it into the power outlet.
SWITCHERS 7 7.3 RS-232 CONTROL A computer through RS-232 port can remotely control the MX2426CV . A terminal block connector is used to make interconnection in the field easy. The RS- 232 commands are written using ASCII character format. This makes it simple to program and control the MX2426CV .
SWITCHERS 8 [MONbk] Turns selected outputs in the ON or OFF position b = monitor number k = ON/OFF control. 1 = monitor is in the ON position 0 = monitor is in the OFF position Monitor number counts from left to right. 1 - Judge, 2 - Plaintiff, 3 - Defendant, 4 - Witness, 5 - Jury, and 6-Media.
SWITCHERS 9 7 Can power input be configured for 220V? The MX2426CV has an internal power supply capable of accepting either 110V or 220V through the selection switch, changing the location of the fuse box. 8 May I rack mount this unit? Yes, if desired, you may order Rack Ears for single unit (part# DA1292FC ) from optional accessories.
SWITCHERS 10 ALTINEX POLICY 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service. This warranty is limited to repairing at company’s factory any part or parts of the product that which upon company’s examination shall disclose to be thus defective.
An important point after buying a device Altinex MX2426CV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MX2426CV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MX2426CV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MX2426CV you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MX2426CV will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MX2426CV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MX2426CV.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MX2426CV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MX2426CV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
