Instruction/ maintenance manual of the product PPSW10E Fusion
Go to page of 28
POWERPLANT SUBWOOFER MODELS PP – SW10E, PP– SW12E, PP– SW15E, PP– SW10H, PP– SW12H, PP– SW15H.
2 2 2 FUSION CUL TURE There’ s no point doing something if no one notices. W e’ve always believed the way to make things happen is by getting noticed. From our product, to our demo cars, to our events, FUSION is about making some noise. Now you are ready .
3 3 3 RECORD YOUR PRODUCT DET AILS HERE: MODEL NUMBER _______________________________ DA TE OF PURCHASE______________________ AFFIX RECEIPT HERE WARNING! Audio Systems can produce sound levels over 135dB.
4 4 4 SUBWOOFER FEA TURES FUSION subwoofers are low frequency drivers capable of delivering extremely high bass levels from small enclosures. In order to achieve the maximum performance from your new FUSION Subwoofer , please use one of the recommended sized enclosures that best suits your application.
5 5 5 SUBWOOFER THEILE/SMALL P ARAMETERS Subwoofer Parameters PP-SW10E PP-SW12E PP-SW15E MAX Power Rating (W atts) 750 900 1200 RMS Power Rating (W atts) 250 300 400 Coil Height (Hvc) (mm) 25 25 25 Compliance (Cms) (uM/N) 281.69 248.25 148.67 Cone Area (Sd) 31.
6 6 6 SUBWOOFER THEILE/SMALL P ARAMETERS cont... Subwoofer Parameters PP-SW10H PP-SW12H PP-SW15H MAX Power Rating (W atts) 900 1200 1500 RMS Power Rating (W atts) 300 400 500 Coil Height (Hvc) (mm) 28 28 28 Compliance (Cms) (uM/N) 291.8 171 147.72 Cone Area (Sd) 31.
7 7 7 SUBWOOFER PP-SW10E DIMENSIONS 282mm (11 – 1/8") 282mm (11 – 1/8") 282mm (11 – 1/8") 184mm (7 – 1/4") 161mm (6 – 3/8") 240mm (9 – 7/16").
8 8 8 SUBW00FER PP-SW12E DIMENSIONS 333mm (13 – 1/8") 333mm (13 – 1/8") 291mm (11 – 7/16") 191mm (7 – 9/16") 168mm (6 – 5/8") 333mm (13 –1/8").
9 9 9 333mm (13 – 1/8") 333mm (13 – 1/8") 291mm (11 – 7/16") 191mm (7 – 9/16") 168mm (6 – 5/8") 333mm (13 –1/8") 366mm (14 – 7/16") 210mm (8 – 1/4&qu.
10 10 10 282mm (11 – 1/8") 282mm (11 – 1/8") 282mm (11 – 1/8") 198mm (7 – 1 3/6") 175mm (6 – 7/8") 240mm (9 – 7/16") SUBW00FER PP-SW10H DIMENSIONS.
11 11 11 282mm (11 – 1/8") 282mm (11 – 1/8") 282mm (11 – 1/8") 198mm (7 – 1 3/6") 175mm (6 – 7/8") 240mm (9 – 7/16") 333mm (13 –1/8") 333mm ( 13 – 1/.
12 12 12 366mm (14 – 7/16") 224mm (8 –13/16") 197mm (7– 3/4") 410mm (16 –1/8") 410mm (16 –1/8") 410mm (16 –1/8") SUBW00FER PP-SW15H DIMENSIONS.
13 13 13 ENCLOSURES All enclosures include port and subwoofer displacement. All ports are circle aero ports unless otherwise stated. Ported Enclosures: A ported enclosure is generally larger than a sealed enclosure Sealed Enclosures: A sealed enclosure will be the smallest enclosure you can build.
14 14 14 ENCLOSURE CONSTRUCTION All enclosures should be constructed from 18mm (3/4”) Medium Density Fibre board. Enclosures should be glued and screwed, because MDF is porous. FUSION recommends sealing the internal sides with a polyurethane sealer prior to installation.
15 15 15 5 10 50 100 500 1000 20 K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 750 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 87 81 93 99 105 111 117.
16 16 16 5 10 50 100 500 1000 20 K 89 83 95 101 107 113 119 125 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 90 84 96 102 108 114 1.
17 17 17 5 10 50 100 500 1000 20 K 91 85 97 103 109 115 121 127 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 91 85 97 103 109 115 .
18 18 18 5 10 50 100 500 1000 20 K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 900 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 20 K 10K 5 K 1 K 87 81 93 99 105 .
19 19 19 5 10 50 100 500 1000 20 K 90 84 96 102 108 114 120 126 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1200 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 90 84 96 102 108 114 .
20 20 20 ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20 K 93 87 99 105 111 117 123 129 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 1500 watts PORTED SUBW00FER PP-SW15H 5 10 50 100 500 1000 .
21 21 21 TECH TIPS OHMS LA W SIMPLIFIED IR E voltage watt s amperage curren t resistance R I W E I E 2 W W I 2 E 2 R I 2 R W E E R WR W I W/R EI POWER CABLE CALCULA TOR TOT AL AMPERAGE 0-4 FT 4-7 FT 7.
22 22 22 SUBWOOFER RULER GUIDE Use the FUSION ruler guide to create a perfect subwoofer mounting surface. 1: Mark the centre position on the MDF (Medium Density Fibre) board where the subwoofer is to be mounted. 2: Fix the first hole (centre) to the marked out position on the MDF .
23 23 23 5: Using a jigsaw or router , cut out this measurement. 3: Insert a pencil into the correct subwoofer cut out measurement. 10", 12", or 15".
24 24 24 Parallel V oice Coil Wiring (2 Ohm operation) T o wire a DVC subwoofer in parallel (to get 2 Ohms), use two short pieces of speaker wire and link the positive from one coil to the positive of the second coil, and do the same for the negative as shown in fig 1.
25 25 25 SERIES WIRING FORMULA FOR 2 SPEAKERS 4 Ohm + + + – – – 8 Ohms R1 + R 2 = LOAD IMPEDANCE 4 Ohm P ARALLEL WIRING FORMULA FOR 2 SPEAKERS 4 Ohm 8 Ohm 2.
26 26 26 TROUBLE SHOOTING No sound from your subwoofer : Check amplifier and wiring connections. Distorted sound : Check the connections from amplifier , processor or head unit. Subwoofer makes unusual noise in sealed enclosure : The enclosure may have leaks causing a lack of back pressure.
27 27 27 NOTES � � � � � � � � � � � � � � � � � � YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center .
Specifi cations and design are subject to change without notice..
An important point after buying a device Fusion PPSW10E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fusion PPSW10E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fusion PPSW10E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fusion PPSW10E you will learn all the available features of the product, as well as information on its operation. The information that you get Fusion PPSW10E will certainly help you make a decision on the purchase.
If you already are a holder of Fusion PPSW10E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fusion PPSW10E.
However, one of the most important roles played by the user manual is to help in solving problems with Fusion PPSW10E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fusion PPSW10E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
