Instruction/ maintenance manual of the product MX2414RM Altinex
Go to page of 14
SWITCHERS MANUAL PART NUMBER: 400-0020-003 PRODUCT REVISION: 0 MX2416RM/MX2414RM 6/(4) - IN, 1 - OUT VGA/MAC SWITCHER USER’S GUIDE.
SWITCHERS 1 INTRODUCTION Thank you for purchasing the MX2416RM Switcher. We are sure you will find it a reliable and useful product. Superior performance for the right price backed by solid technical and customer support is what we have to offer.
SWITCHERS 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MX4216RM Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2416RM and to prevent fire and shock hazard.
SWITCHERS 3 ABOUT YOUR SWITCHER 2 The MX2416RM is a 6-in 1-out relay switcher designed to allow the non-simultaneous connection of up to six PC or six MAC computer video sources to a single monitor or projector. The MX2416RM is controllable using its built-in front panel, through RS-232, or through contact closures.
SWITCHERS 4 Sync on Green -0.3V Impedance pass-through Frequency Compatibility Typical Video Bandwidth 400 MHz @ -3 dB Horizontal 15-200 kHz Vertical 30-190 Hz Cross-talk -48dB @ 10 MHz Coupling DC Power External Power Adapter 90-140V/200-240V Power Consumption 12 watts max.
SWITCHERS 5 The front panel of the MX2416RM provides access to essentially all of the switcher’s capabilities. In addition to standard switching functions, the unit has control and switching functions that could be very useful in a variety of special applications.
SWITCHERS 6 4.6 POWER UP DEFAULT SET This function allows a user to select the channel that will be ON at power up. To select the default channel press the selected channel switch and hold it for approximately 2 seconds until you hear a beeping sound.
SWITCHERS 7 INSTALLING YOUR SWITCHER 6 Step 1 . Make sure that the power input is set to the proper AC voltage in your country. An incorrect setting can result in unit damage not covered by warranty. Step 2. Connect the power cord to the unit and plug it into the power outlet.
SWITCHERS 8 IBM PIN No. MX2416RM PIN No. 2 2 3 3 5 5 Connection IBM-PC 9-pin D to MX2416RM 9-pin D Note: 4, 6, 8 shorted together in IBM side only. Port setting preferences for the control system or c.
SWITCHERS 9 [ OUTmm] This command sets the switcher to respond to specific output only. The default setting is output 1. [SETxnnmm] x - select input number nn - Minimum input number mm - Maximum input number This command is designed to allow the MX2416RM to program each input to respond to a selected range of input commands.
SWITCHERS 10 accommodate this need. The pin-outs for this adapter are as follows: 9 pin “D” Male Description 9 pin “D” Female Input 7 1.2K 1 1 7 3.3K 2 2 7 6.8K 3 3 7 12K 4 4 7 22K 5 5 7 51K 6 6 7 0 short 7 NONE 5 Ground 9 The following voltages apply for selecting the required channel: Input number min.
SWITCHERS 11 This will setup each switcher as a different output number. To control the switchers use following commands (connect the transmit line from the control system to the receive line on both .
SWITCHERS 12 CB36100MR 100 feet MAC Male to Female CB36150MR 150 feet MAC Male to Female POWER CABLES PC5301US Power cable for US PC5302US Power cable for U.K. PC5303US Power cable for Australia PC5304US Power cable for Germany FREQUENTLY ASKED QUESTIONS 9 No Question Answer 1 When I press F1 nothing happens.
SWITCHERS 13 2. SYNC is less than 1.0 V and more than 0.3 V. • Please use the appropriate input voltage 110 VAC or 220 VAC. • Please make sure that the proper quality of cables is used.
An important point after buying a device Altinex MX2414RM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MX2414RM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MX2414RM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MX2414RM you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MX2414RM will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MX2414RM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MX2414RM.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MX2414RM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MX2414RM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
