Instruction/ maintenance manual of the product MX2206RM Altinex
Go to page of 14
SWITCHERS MANUAL PART NUMBER: 400-0065-003 PRODUCT REVISION: 1 MX2206RM 6 - IN, 1 - OUT RGBS AUTO SWITCHER USER’S GUIDE.
SWITCHERS 1 INTRODUCTION Thank you for purchasing the MX2206RM Switcher. We are sure you will find it a reliable and useful product. Superior performance for the right price backed by solid technical and customer support is what we have to offer.
SWITCHERS 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MX2206RM Switcher. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MX2206RM and to prevent fire and shock hazard.
SWITCHERS 3 ABOUT YOUR SWITCHER 2 The MX2206RM is a 6-in 1-out solid rate RGBS switcher with auto-switching and Sync Delay Switching capabilities. It can be controlled using its built-in front panel, through RS-232, or through the use of contact closures.
SWITCHERS 4 Impedance 22 Ohms Frequency Compatibility Typical Video Bandwidth 200 MHz Horizontal 15-200 kHz Vertical 20-190 Hz Cross-talk -48dB @10 MHz Coupling DC Power External Power Adapter 90-140V/200-240V Power Consumption 20 watts max.
SWITCHERS 5 4.1 FRONT PANEL The front panel of the MX2206RM provides access to essentially all of the switcher’s capabilities. In addition to standard switching functions, the unit has control and switching functions that could be very useful in a variety of special applications.
SWITCHERS 6 a 9-pin “D” connector. The output can switch from 0V to approximately 5.0V. The output impedance of this pin is 100 Ohms and it can sink or source up to 5 mA of current. By using this output, several switchers can operate in gang mode.
SWITCHERS 7 INSTALLING YOUR SWITCHER 6 Step 1 . Make sure that the power input is set to the proper AC voltage in your country. An incorrect setting can result in unit damage not covered by warranty. Step 2. Connect the power cord to the unit and plug it into the power outlet.
SWITCHERS 8 IBM PIN No. MX2206RM PIN No. 2 2 3 3 5 5 Connection of IBM-PC 9-pin D to MX2206RM 9-pin D. Note: 4, 6, 8 shorted together in IBM side only.
SWITCHERS 9 This command is designed to allow the MX2206RM Switcher to program each of the inputs to respond to a selected range of input commands. For example, if command [SET10104] is issued, then the following commands will select only Input 1: [I01O01], [I02O01], [I03O01], [I04O01].
SWITCHERS 10 The following voltages apply for selecting the required channel: Input number min. (V) nom. (V) max. (V) 1 0.35 0.55 0.75 2 1.07 1.27 1.47 3 1.80 2.00 2.20 4 2.52 2.72 2.92 5 3.25 3.45 3.65 6 3.97 4.17 4.37 These voltage levels can be set using analog outputs from different control systems or spare dimmer control outputs.
SWITCHERS 11 [I02O02] Select input number 8 [I03O02] Select input number 9 [I04O02] Select input number 10 [I05O02] Select input number 11 ACCESSORIES 8 Model No.
SWITCHERS 12 respond? 6 How do I control several switchers with one RS-232 card in a control system? You can control multiple switchers with one card at this time. The unit does have ID codes and can be differentiated by the control system. Call Altinex if this requirement is important for your system.
SWITCHERS 13 ALTINEX POLICY 11 11.1 LIMITED WARRANTY Altinex warrants that its products and cables are free from defects in materials under normal use and service. This warranty is limited to repairing at company’s factory any part or parts of the product, which upon company’s examination shall disclose to be, thus defective.
An important point after buying a device Altinex MX2206RM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MX2206RM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MX2206RM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MX2206RM you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MX2206RM will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MX2206RM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MX2206RM.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MX2206RM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MX2206RM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
