Instruction/ maintenance manual of the product CA-CD500 Fusion
Go to page of 13
CA-CD500 OPERA TION MANUAL.
2 2 3 3 Version 3.0 FUSION CUL TURE There’s no point doing something if no one notices. We’ve always believed the way to make things happen is by getting noticed. From our product, to our demo cars, to our events, FUSION is about making some noise.
4 4 5 5 PRECAUTIONS & MAINTENANCE This equipment has been tested and found to comply with the limits for a Class 1 laser product, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
6 6 7 7 Reasons For Playback Failure - Scratched or flawed CD - Fingerprints or marks on CD - CD exposure to extreme sunlight or heat - CD with a failed recording or open session - Copy protected CD’s that don’t conform to the audio CD industry standard.
8 8 9 9 BASIC OPERA TIONS 1. PWR/SRC Long key press: Power On/Off Short key press: Play mode selection Radio - CD - iPod - AUX 2. VOLUME Turn: Volume control Press: Mute (or pause function on CD playing) 3.
10 10 11 11 SECURITY Setup This is an Anti Theft Feature, if power is removed from product or battery is disconnected, security code is required to re-activate.
12 12 13 13 - Alter the chosen DISPLAY setting by turning the joystick encoder. Confirm the alteration by pressing the joystick. - Press the MENU button to go back to the previous SETUP screen RDS SET.
14 14 15 15 MP3 Insert / Eject To open the face of the head unit, press and hold the TILT/EJECT button for 3 seconds. Remove / insert the CD into the slot.
16 16 17 17 NUT(5MM) NUT(5MM) FASTEN THIS END TO SECURE PART OF DASHBOARD. DRIL HOLE IF NECESSARY. MOUNTING SLEEVE SCREW STUD CAUTION: FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE MOUNTED WITHIN 20' OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.
18 18 19 19 Aux Harness Diagram Pin NO Signal 1 Line Out R.R 2 Line Out L.R 3 Line Out R.F 4 Line Out L.F 5 Aux in Left 6 Ground R.R L.R R.F L.F 7 Ground Aux left Ground Aux right 8 Aux in Right 9 Gro.
20 20 21 21 TECHNICAL SPECIFICA TIONS Size : 7” (W) x 2” (H) x 6-1/2” (D) 178 mm x 50 mm x 160 mm Operating voltage : 12Volt DC , Negative Ground Fuse ratings : Constant (Yellow wire) 15AMP. Switched (Red wire) : 1.0 AMP. Output power : 50 watts x4 channels Output : RCA line-level outputs.
22 22 23 23 If a problem develops during the limited warranty period, the consumer should take the following step-by-step procedure: 1. The consumer shall return the product to the place of purchase for repair or replacement processing. 2. The consumer shall also be charged for any parts or labour charges not covered by this limited warranty.
* * Specifications and design are subject to change without notice. * *.
An important point after buying a device Fusion CA-CD500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fusion CA-CD500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fusion CA-CD500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fusion CA-CD500 you will learn all the available features of the product, as well as information on its operation. The information that you get Fusion CA-CD500 will certainly help you make a decision on the purchase.
If you already are a holder of Fusion CA-CD500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fusion CA-CD500.
However, one of the most important roles played by the user manual is to help in solving problems with Fusion CA-CD500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fusion CA-CD500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
