Instruction/ maintenance manual of the product MULTI-TASKER MT104-102 Altinex
Go to page of 12
MULTI-TASKER MANUAL PART NUMBER: 400-0092-005 6-IN, 1-OUT VGA SWITCHER CARD FOR MULTI-TASKER ENCLOSURES USER’S GUIDE MT104-102 TM.
MULTI-TASKER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL .......................................................... 2 INSTALLATION ................................................. 2 CLEANING ......................
MULTI-TASKER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT104-102 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT104-102 and to prevent fire and shock hazard.
MULTI-TASKER 3 ABOUT YOUR MT104-102 2 MT104-102 6-in 1-out MT VGA Switcher Card The MT104-102 6-in 1-out MT VGA S W Card uses two slots in Multi-Tasker enclosures. This card enables multiple computer video sources to be connected and switched to a single scan-rate compatible display.
MULTI-TASKER 4 PRODUCT DESCRIPTION 4 APPLICATION DIAGRAM 5 Application Diagram 1.
MULTI-TASKER 5 Application Diagram 2: Internal View of the MT104-102.
MULTI-TASKER 6 INSTALLING YOUR MT104-102 6 Step 1. Slide the MT104-102 into an available slot in the Multi-Tasker™ Enclosure in order to connect to the bus. Make sure that the MT104-102 card fits into place. Secure the card to the Multi-Tasker™ by tightening the retainer screws located on the top and bottom of the MT104-102 card.
MULTI-TASKER 7 Example: If one MT104-102 card is in slot #2 of unit 3: To send command [VERC2U3] , the Multi - Tasker™ Enclosure will return feedback as: MT104-102 690-0158-003 2.
MULTI-TASKER 8 Example: If there are two MT104-102 cards in slot 6 and 7 of unit 3: To enable input 1 of card 6 and input 3 of card 7 simultaneously, use the following commands: [ON1C6U3 P ] [ON3C7U3 P ] [S W] If "F" is included use the [ ONmCnUi PF ] command or the [ ONmCnUi FP ] command.
MULTI-TASKER 9 [S W] The system will return feedback as OK if the unit ID is zero. 6. [WR] This command groups multiple cards in the MT100-100 Enclosure.
MULTI-TASKER 10 7.3. SUMMARY OF COMMANDS 1) [VER]: Receives softwar e version 2) [C]: Receives status of the card 3) [ON]: Turns on one input for a single card or a group of cards 4) [OFF]: Turns off .
MULTI-TASKER 11 Solution 1: Look at the card and verify that there is no damage. If there is no damage, see Solution 2. Solution 2: Verify that all IC’s are seated in their sockets. If the LED is still blinking red, see Solution 3. Solution 3: Call ALTINEX at (714) 990-2300.
An important point after buying a device Altinex MULTI-TASKER MT104-102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MULTI-TASKER MT104-102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MULTI-TASKER MT104-102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MULTI-TASKER MT104-102 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MULTI-TASKER MT104-102 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MULTI-TASKER MT104-102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MULTI-TASKER MT104-102.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MULTI-TASKER MT104-102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MULTI-TASKER MT104-102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
