Instruction/ maintenance manual of the product PP-505 Furuno
Go to page of 20
PRINTER PP-505 (For FE-700).
i SAFETY INSTR UCTIONS WARNING Do not open the cover of the equipment. This equipment uses high voltage electricity which can shock or burn. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result.
ii A warning label is attached to the printer. Do not remove the label. If the label is missing or damaged, contact your dealer about replacement. WARNING To avoid electrical shock, do not remove cover. No user-serviceable parts inside. Name: Warning Label (1) Type: 86-003-1011 Code No.
iii FOREWORD A Word to th e Owner of the PP -5 05 Congratulat ions on your choice of the FURUNO PP-505 Printer . For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for innovative and dependable marine electronics equipment. This dedication to excellence is furthered by our extensive global network of agents and dealers.
iv T ABLE OF CONTENTS 1. OPERA TION .................................................................................................. 1 1.1 General ......................................................................................................
1 1. OPERA TION 1.1 General Operation of the PP-505 is simple; just turn on the power . The depth graph or the log, whichever is selected for printing, is printed out at the interval set. Below are example printouts. 60m 80m 100m 20m 40m Marker 2003/12/01 13:05:00 038.
OPERA TION 2 Changing the mode Press the [MODE] k ey to change t he printing mode from depth graph to log printing alternately . The printing inter val setting is pr inted whenever the [MODE] key is pressed. Changing the printing interval Press the [I NTER V AL] key t o choose printing interv al .
3 2. REPLACEMENT OF THERMAL PA P E R W hen the thermal paper runs out, the P APER LED blinks, pr inting stops automatically and the audible alarm sounds for five seconds. W ith 1 m of pape r remaining, a red paper end mark appears on the p aper . W hen the red mark appears, replace the thermal paper as shown in the procedure below .
4 3. INST ALLA TION 3.1 Complete Set Name Type Mass Qty Remark Main Unit PP-505 3.1 kg (with hanger) 1 Spare Parts SP08-01600 1 Installation Materials CP16-00800 1 Accessories FP08-00500 1 Flush Mount Kit OP08-4 1 Option (004-511-330) 3.
3. IN ST ALLA TION 5 3.3 T abletop/Bulkhead Mount The m ain uni t can be m ounted on a desktop, bulkhead, or in a p anel. M ake sur e the selec ted loc ation i s str ong enough to suppor t the mai n unit agai nst poss ibl e vi brati on and shock . I f necessary , appropr iate rei nforcem ent meas ures should be m ade on the mounti ng area.
3. INST ALLA TION 6 1. Referring to the illustration below , prepare a cutout in the mounting area and drill four pilot holes f or the flush mount angles. Refer to the outline dra wing at end of m anual. 2. Fix the liner and the flus h mount angles to the main unit.
7 4. MAINTENANCE Checking the power connector Check for loosened or disconnected pow er connector . WARNING Do not open the cover of the equipment. This equipment uses high voltage electricity which can shock or burn. Only qualified personnel should work inside the equipment.
A P-1 APPENDIX REPLACEMENT OF PRINTER ASSEMBL Y/TERMAL HEAD 1. Loosen the four M4 × 15 screws fixing the rear cabinet to the main unit assembly . 2. Disconnect the connecto rs connected to the rear cabinet to detac h the rear cabinet. Rear Cabinet Main Unit Assembly P1 NH 4P P5 NH 6P M4 × 15 screw (4 pcs.
A P-2 6. Pull out the connector end o f the flexible cable from the connector . T ake care not to damage the flexible cabl e. End of Fle xible Cable (Connector) 180 ° 7. Remove the thermal head from the head holder with a screwdriv er as shown below , and then take the t hermal head assembly out of the printer assembly .
A P-3 1 1. Fix the flexible cable to the carriage w ith the flexible cable support, inserting the projection on the carriage into the hole o f the cable. Fle xible Cab le Suppor t Carriage Projection 12. Fold back the end of the cable and insert it into the connector .
FURUNO SP - 1 E5540S03- 1 SPECIFICA TIONS OF PRINT ER PP-505 1 DATA FORM A T 1.1 Receiv ing Syste m RS-232 C 1.2 Speed 9600 bps 1.3 Data Lengt h 8 bits 1.4 Parity Non 1.5 Stop Bit 1 bit 2 PRINTER SEC TION 2.1 Printing Sy stem 9 dots serial ther mal head printing sy stem 2.
.
Takahashi T . Takahashi T ..
Takahashi T . Takahashi T ..
2 4 3 A 1 B C DRAWN CHECKE D APPROV ED DWG.No . TITLE NAME 名称 相互結線図 INTERCONNECTIO N DIAGRAM PRINTER 08S008 7 1 2 SHIP'S MA INS 船内電源 12-32 V DC 5 4 3 2 1 6 7 RXD (H) TXD (H) TXD (C) RXD (C) 0V +12V N.C. FM14-2P 08S0157 4 6 5 EIA232 -TD EIA232 -RD GND DISTRIBUT ION BOX 分配箱 FE-702 TB1 FM14-7 P *2 *3 1.
An important point after buying a device Furuno PP-505 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno PP-505 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno PP-505 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno PP-505 you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno PP-505 will certainly help you make a decision on the purchase.
If you already are a holder of Furuno PP-505, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno PP-505.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno PP-505. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno PP-505 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
