Instruction/ maintenance manual of the product NX-700B Furuno
Go to page of 89
NA VTEX RECEIVER NX-700A/B.
The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi y a 662-8580, JAPAN .
i IMPORT A NT NO TICE • No par t of thi s manual may be copi ed or r eprod uced w ithout w ritt en permi ssion. • If this m anual is lost or w orn, c ont act your deal er about repl ace ment. • T he cont ent s of thi s manual and eq ui pment spe ci fi cati ons are subjec t t o change w ithout noti ce.
ii SAFETY INSTR UCTIONS WARNING Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. Continued use of the equipment can cause fire or electrical shock.
iii Do not open the equipment unless totally familiar with electrical circuits and service manual. Only qualified personnel should work inside the equipment. WARNING WARNING Turn off the power at the mains switch- board before beginning the installation.
i v FOR WOR D Congr atul ations on y our choi ce of the F URU NO NX -700A/B NA VT EX Recei ver . We are c onfi dent t hat y ou w i ll enjoy many y ears of operat i on w it h t his fine pi ece of equi pment .
v Fea tures NA VT EX ( Navigat ional T e l ex) is a wor ld wi de co ast al t el ex broadcas ti ng syst em. Coast al NA VT E X broadc asti ng st ati ons wi th s pe c ifi c I D’s tr ansmi t Navigati onal w arnings.
vi T A BLE OF CO NTE NT S EQUIPMENT LISTS ........................................................................................... viii SYSTEM CONFIGUR A TIONS .............................................................................. x 1. PRINCIPLE OF N A VTEX SYS TEM .
vii MENU TREE.................................................................................................... AP-1 SPECIFICA TIONS ........................................................................................... SP-1 P A CKI NG LISTS ..
viii EQUIPM ENT LISTS St a nd ard S u ppl y Na me T ype Code No. Qty Re marks NX -700A - w/ printer Dis pl ay Unit NX -700B - 1 w/o prin te r Recei ver Unit NX -7001 - 1 Antenn a Unit NX -7H - 1 CP08-.
ix Optio nal Sup ply Na me T ype Code No. Qty Remar ks T hermal Paper T P058-30CL 000- 154- 047 1 set For NX -700A OP08- 19 004- 515- 260 1 For NX -700A Fl ush M ount Kit OP08- 20 004- 515- 270 1 For .
x SYSTEM CONFIGU RA T IONS P ow er supply 12-24 VDC DISPLA Y UNIT NX-700B Rectifier PR-240-CE : Standard : Option : User supply DISPLA Y UNIT NX-700A RECEIVER UNIT NX-7001 P ow er supply 100-115/ 200-230 V AC . 1 , 50/60 Hz Exter nal Alarm INS (Integrated Na vigation System) or Navigator or ANTENNA UNIT NX-7H Max.
1-1 1. PRINCIPLE OF N A V TEX SYSTEM 1.1 How NA VTEX W orks NA VT EX is an acrony m meaning Na v i gati onal T el ex, and as i t s name show s, it is a ki nd of nar row band radio t el ety pe s y stem f or sending (by freque ncy shif t key i ng) t ext messages express ed in a 7-uni t code.
1. PRIN CIPLE OF NA VTEX S Y STEM 1-2 1.3 Mess age Format For aut omat i c i denti f i cation of mes sages, each mess age s t art s wi th nine cont rol charact ers, cal led “Hea der co des”. T he f i rst fi ve charact ers ar e alw ay s “ZCZ C_“ an d comm on to al l mess ages.
1. PRIN CIPLE OF NA VTEX S Y STEM 1-3 1.4 N A VTEX St ation Map.
1. PRIN CIPLE OF NA VTEX S Y STEM 1-4 1. 5 NA VT EX St ation Li st NA V area Co un try St at i o n La titu de Lo n gi tude Fr eq. (kHz) Ar ea (nm) S t ati on ID Br oadc a st s ch edul e (UT C) I B e l.
1. PRIN CIPLE OF NA VTEX S Y STEM 1-5 NA V area Co un try St at i o n La titu de Lo n gi tude Freq. (kHz) Ar ea (nm) S t ati on ID Br oadc a st s ch edul e (UT C) III Bulg a r ia V a r na 43 04 N 27 4.
1. PRIN CIPLE OF NA VTEX S Y STEM 1-6 NA V area Co un try St a t i o n La titu de Lon git ude Fr eq. (kHz) Ar ea (nm) S t ati on ID Br oadc ast s ched ul e (UT C) IV Canad a Labr ad o r 53 42 N 57 01 .
1. PRIN CIPLE OF NA VTEX S Y STEM 1-7 NA V area Co un try St a t i o n La titu de Lon git ude Fr eq. (kHz) Ar ea (nm) S t ati on ID Br oadc a st s ch edul e (UT C) IX Saudi Ar abi a J eddah 21 23 N 39.
1. PRIN CIPLE OF NA VTEX S Y STEM 1-8 NA V area Co un try Sta t i o n La titude Lo ngi tude Fr eq. (kHz) Ar ea (nm) S t ati on ID Br oadc ast s ched ul e (UT C) X I V ietna m Ho Chi M inh C i ty 10 47 N 106 40 E 5 18 400 X 035 0, 0750 , 1 150 , 1550 , 1950, 2350 490 40 0 W 03 40, 154 0 Ha ip ho ng 20 44 N 106 44 E 4209.
2-1 2. OPER A T ION 2.1 O perating Control s ENT MENU ESC DIM LIST PRINT T urns the power on/off . Opens the PRINT options. Opens the LIST options. Opens menu/Returns to the previous displa y . Cursor pad -Shifts the cursor and displa y . -Selects items on menus.
2. OPERA TION 2-2 At t he def ault set ti ng, t he equi pment funct i ons a s bel ow; W h e n the r esul t s of the c heck are O K, ALL M ESSAG E di splay f or 518 kHz appear s. T his scr een show s all m essages r ecei ved i n 518 kHz. Y ou can s w itc h 518 kHz (I nternat i onal m essage) and 490 kHz ( l ocal message) to dis pl ay .
2. OPERA TION 2-3 2.4 Confirming th e Ne w Messag e W h e n y ou receive a new message, do on e of t he foll owi ng depen di ng on message received. SA R ( S earch an d Res cue) mes sag e 1. W he n an SAR mes sag e i s recei v e d, the audi bl e al ert s ounds an d det ail s f or the SA R messa ge appear .
2. OPERA TION 2-4 2.5 Sample Messag es Press ▲ or ▼ o n the c ursor p ad to c hoos e a mess age, and then pres s the EN T key t o show the det ai l ed inf orm ati on f or that message. The m essage l i st and det ailed m essage di spl ays can be s w it ched by p ress i ng the EN T key .
2. OPERA TION 2-5 2.6 Choosing the Re ceiv e Mo de T he NA VT EX menu al l ows you t o sel ect what st at ion t o rec eive, aut om atical ly , manu al ly . T he Auto mode r equir es na vigat i on da ta, and st ati ons are automat i cal ly select ed accordi ng to the di st ance betw een o w n shi p and NA VTEX st ations .
2. OPERA TION 2-6 2.7 Choosing the Lo cal Freque n c y Y ou can choose 49 0 kHz or 42 09.5 kHz as t he l ocal fr equency . T his funct ion i s only av ai labl e for t he A uto and M anual modes. (See p aragrap h 2.6.) 1. Pr ess the MENU/ ESC k ey to sh ow the ma in me nu .
2. OPERA TION 2-7 3. Pr ess ▲ or ▼ to c ho ose “Rc v S tat i on & M sg” or “User Sel ect S t ati on & M sg”. 4. Pr ess the ENT key to open t he appropri at e edit i ng w i ndow . (Bel ow is t he Rcv S t ati on & M sg editi ng wi ndo w .
2. OPERA TION 2-8 2.9 Switching th e Frequ ency to Display W i th s h ow ing t he mes sag e l is t, you can sw itch the fr equ ency t o 518 kHz or 49 0 (or 420 9. 5) kHz by pressi ng ◄ or ► key . 518 490 (4209) Press Sw i tching the f r eq uency to di splay 2.
2. OPERA TION 2-9 2.1 1 Processi ng Mess ages Choos ing m essages to d i spl ay Y ou can choose w hich cat egory of mess ages to displ ay : All, Alarm, User Sel ect ed and Goo d messages . 1. W i t h the mes sage l ist or det ail ed message s ho w n , pr ess t he LIST key to show the li st opti ons.
2. OPERA TION 2-1 0 Prot ecting m essa ge from deleting M essages are a utom ati cal ly del eted f rom t he memor y under t he fol lowi ng condi ti ons. -66 ho urs p assed f rom t he moment w hen recei ved. -Ol der than No. 200 T o prevent a m essag e from bei ng delet e d, do the f ol low s ; 1.
2. OPERA TION 2-1 1 Prin ti ng each messag e 1. Pr ess ▲ or ▼ to ch oose th e desire d mes sage from th e list. 2. Pr ess the ENT key t o show the det ail ed inf orm ati on. 3. Pr ess the PRINT key . 4. Pr ess ▲ or ▼ t o ch oose “P ri nt” fr om the w indow .
2. OPERA TION 2-1 2 2.13 Editing th e NA VTEX St ation List M axi mum 300 NA VT EX st ations can be regi st er ed i nto t he memor y . Note : T o cancel edi t ing of a NA VTEX st ation, press t he ME NU/E SC key . T he messag e “Exi t wi thout sav i ng?” ap pears.
2. OPERA TION 2-1 3 NavArea 1 Station Latitude 0 00'N Longitude 0 00'E 518kHz ID1: - ID2: - ID3: - 490kHz ID1: - ID2: - ID3: - 4209.5kHz ID1: - ID2: - ID3: - Range 400nm Sav e data ? Station Name NA V Area Latitude Longitude Station ID Ser tvice Area New addi tion w indow 5.
2. OPERA TION 2-1 4 Editin g N A VT EX st atio n Exi st i ng NA VTEX st ation may be edit ed as foll ows: 1. Pr ess the MENU/ ESC k ey to sh ow the ma in me nu . 2. Pr ess ▲ or ▼ to c ho ose Ser v i ce, an d then pr es s t he ENT key . 3. Pr ess ▲ or ▼ to c ho ose Edi t S tat i on Li st, and t hen pr ess t he EN T key .
2. OPERA TION 2-1 5 Edit Delete 7. Pr ess ▲ or ▼ to c ho ose D el ete, and then pr ess the ENT key . The m essa ge “D elet e st atio n?” appear s. 8. Pr ess ◄ to choos e “Y es”, and then pr ess t he ENT key to cl ose t he edit wi ndo w .
2. OPERA TION 2-1 6 2.15 Mess ages List I n addition t o the mes sage “R eceived n ew l ocal (int ’l) msg. ” t he foll owi ng messag e-relat ed mess ages m ay appear o n the displ ay . Mess age Me ani ng Remedy New me ss age received . Oldes t mess ag e del eted t o free up mem or y .
2. OPERA TION 2-1 7 2.16 O ther Functio ns T h is p aragraph descr i bes the v ari ous opt ions w hic h al low y ou to set up your uni t to sui t y our needs. N A VT EX menu Item D escr iption Settin g Recei ve M ode Choos es t he rec ei ving mo de. (See par agr aph 2.
2. OPERA TION 2-1 8 Disp l ay menu Item Des cription Se tting Sc rollin g Sel ect s the speed of scro ll ing by pres si ng ▲ or ▼ . Slow: S crol ls by one li ne. Fast : Sc rol l s by hal f of screen. Skip s to $$: Scrol ls li ne by li ne i n list dis play; Ski p s to $$ posi ti on in det ailed display .
2. OPERA TION 2-1 9 Servic e menu Item Des cription Sett ing IN S I nput S peed Sel ect s the dat a transmi ssion s peed at w hich to i nput dat a from I N S. 4800, 9600, 19200, 38400 bps IN S Outp ut S peed Sel ect s the dat a transmi ssion speed t o out put d at a to the I NS.
2. OPERA TION 2-2 0 T h is p age is intent i onally l ef t be blank..
3-1 3. M A INTEN ANCE & TROUBLESHOO TING T h is chapter pro vides i nformati on necess ary for keepi ng y our uni t i n good w ork i ng order and rem e dy i ng si mpl e probl ems. WARNING WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock exists inside the equipment.
3. MAINTENAN CE & TROUBLESHOO T ING 3-2 3.2 Replacement of Fus e, Batt ery and Thermal Paper Fuse T he fuse insi de the rec ei ver uni t protec t s the equipm ent f rom o v ercur r ent or revers e p olar i ty . I f the fus e bl ows , c ont act y our deal er about r eplac em ent .
3. MAINTENAN CE & TROUBLESHOO T ING 3-3 Ther mal p aper (NX- 700A onl y) W h e n the t herm al p aper runs o ut com plet ely , the messag e “P ri nter er ror” (cent e r of sc reen) an d the X icon (at t he ri ght-hand t op corner) appe ar . Repl ace t he paper as f oll o w s.
3. MAINTENAN CE & TROUBLESHOO T ING 3-4 3.3 T roubles hootin g T h is sect i on provides s im pl e troubl eshoot i ng pr ocedu res w hich the us er can fol l ow to r estor e normal operation. I f you cannot rest ore norm al operat i on do n ot att empt to chec k i nsi de the uni t.
3. MAINTENAN CE & TROUBLESHOO T ING 3-5 3.4 Diagnosti cs T he memory test checks RO M , RAM , dat a port, batt ery , key board and LCD for prop er oper ation and di splay s progr am versi o n numb ers. 1. Pr ess the MENU/ ESC k ey t o open the m ai n me nu.
3. MAINTENAN CE & TROUBLESHOO T ING 3-6 8. W h e n the m ess age “Hit any key ” appears on t h e scr een, pres s any key (except key ) t o show the Rx tes t s creen. The alar m for recei vi ng m o nitor s o u nds whi le the Rx tes t is bei n g c on duc te d.
4-1 4. INST A LL A T ION 4.1 D isplay Unit T he displ ay uni t can be i nst alled on a t abletop, on the o v er head, or in a p anel. Refer t o t he outl i ne draw i ngs at the back of t hi s manual for inst all ation ins tr ucti ons. W hen sel ecting a m ou nti ng locati on, keep in m i nd the f ol l o w ing point s.
4. INST A LLA TION 4-2 Flush m ounting T he displ ay uni t can be i nst alled fl ush mounted i n a consol e or pa nel by usi ng the opt i onal f l ush mount ki t. (Fo r NX- 700A ) T y pe: OP08-19 Code No. : 004- 515-260 Name T ype Code No. Qty Remarks M ounti ng metal 08-023- 1019 100- 326- 960 1 Sel f- t apping screw 5X20 000- 802- 081 6 Hex.
4. INST A LLA TION 4-3 4.2 R eceiv er Unit Gene ral m ounting consi der ations • T he mounting l ocation s houl d be w e l l ventil ated and dr y . • T he unit can be m ounted on bulkhea d or t he des k. • Secure t he mai ntenanc e space s h ow n in drawi ng at the back of t hi s manual for eas e of mai ntenanc e an d ser vic e.
4. INST A LLA TION 4-4 4.3 A ntenna Unit M ounting conside rat ions I ns t all the ant enna u ni t ref err ing t o t he antenna i nst all at i on di agram at the bac k of t hi s manual . W h en sel ecting a m ou nti ng l ocat i on for t he ant enna uni t, keep i n mi nd the f ol l owing poi nts : • Do not shor te n the ante nna c abl e.
4. INST A LLA TION 4-5 4.4 Printer (NX-700B o nly ) Prep are the pri nter by local ly as show n below for t he NX-700B. -8 bi t p arall el Centr onic s i nter face, or s eri al RS-232C -S eria l pr inte r -Baud R at e: 960 0 bps -Char act er l ength: 8 bit -Parity: No -Fl o w control : Xon/ X off -32 char acters/ l ine or more 4.
4. INST ALLA TION 4-6 Receiver unit All cables are gathered to the rece iv er unit. Connect cables at inside of the receiver unit as shown below . DSUB25P-DSUB25P-3M cable (to Displa y unit) DPYC-2.5 (to ship's batter y) RCV Board 08P3227 TTYCS-1Q (to Navigator or INS ) DPYC-1.
4. INST ALLA TION 4-7 Fabricate these cables as belo w to conn ect to the receiver unit. DPYC-1.5 (For external alarm) 100 mm 5 mm Scrape the paint off the cab le where the cable contacts the cab le clamp.
4. INST ALLA TION 4-8 Antenna cable Be sure to leave some slack in the cable for future service and maintenance. For RG-10/UY , RG-214 cable When using the coaxial cable, type RG-1 0/UY or RG-214, attach the FM-MP-7 connector (supplied as inst allation materi al) or PL-259 (local supply) as below .
4. INST A LLA TION 4-9 Ext ending ante nna ca ble lengt h W h e n con necting t w o cables for ex tens ion, use opti onal ext ensi on cabl e ki t OP- 04-2. Code No. : 000-041- 174 (10 m ), 000- 041-175 ( 20 m ), 000-04 1-1 76 (30 m) , 000- 041- 177 (4 0 m), 000- 041- 178 (50 m) Name T ype Code No.
4. INST A LLA TION 4-1 0 4.6 Setting of Printer Af ter the c onnecti on complet el y , the setti ng of pr int er should be do ne f or NX -700B as show n below . (For NX -700A, use t he defa ult s etti ng as i s. ) 1. Pr ess the key to turn t he pow er on.
4. INST A LLA TION 4-1 1 4.7 D igit al Interf aci ng T h is equipm ent c an recei ve na vigati on data i n IE C 61 162-1 Ed2/ 2 for m at. Priority TIME ＆ DAT E ZDA L/L GN S > GGA > RMC > GL.
4. INST A LLA TION 4-1 2 GLL: Latitude and long itude $--GLL,llll.lll,a,yyyyy.yyy,a,hhmmss.ss,A,a*hh<CR><LF> | | | | | | | | | | | | | | | +------- 6 | | | | | | +--------- 5 | | | | | +----------- 4 | | | | +---------------- 3 | | +------+----------------------- 2 +---+----------------------------------- 1 1.
4. INST A LLA TION 4-1 3 RMC : Re co mm en d M i ni mum Sp eci f i c GNS S Dat a $--RMC ,hhmmss.ss ,A,llll.lll,a,yyyyy .yyy ,a,x.x,x.x,xxxxxx,x.x,a,a*hh<CR><LF> | | | | | | | | | | | | | |.
4. INST A LLA TION 4-1 4 ZDA: Tim e and da te $--ZDA,hhmmss.ss,xx,xx,xxxx,xx,xx*hh<CR><LF> | | | | | | | | | | | | | +--------- 7 | | | | | +----------- 6 | | | | +-------------- 5 | | | +------------------ 4 | | +---------------------- 3 | +------------------------- 2 +--------------------------------- 1 1.
4. INST A LLA TION 4-1 5 NRQ : Requ est NA VTEX mess ag es Command to request specific NA VTEX message(s) to be sent to IBS port. Messages may be sent in any order .
4. INST A LLA TION 4-1 6 A CK : Acknow le dge $--ACK,xxx*hh<CR><LF> | | | + ------------------------2 +-----------------------------1 1. Local alarm number(identifier) 2. Checksum GNS: $--GNS,hhmmss .ss ,llll.lll,a,yyyyy .yyy ,a,c--c,xx,x.
4. INST A LLA TION 4-1 7 VHW : W ater sp eed and headin g $--VHW,x.x,T,x.x,M,x.x,N,x.x,K*hh<CR><LF> | | | | | | | | | | | | | | | | | +--------- 5 | | | | | | +--+----------- 4 | | | | +--+----------------- 3 | | +---+----------------------- 2 +---+----------------------------- 1 1.
4. INST A LLA TION 4-1 8 VBW: Dual gr ound/w ater s pe ed $--VBW,x.x,x.x,A,x.x,x.x,A,x.x,A,x.x,A*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | +--- 11 | | | | | | | | | +----- 10 | .
4. INST A LLA TION 4-1 9 Ou tp ut d at a descri pt io n NRX : Ne w NA VTEX receiv ed messag e New NA VTEX message to follo w in ASCII f ormat $NXNRX,xxxx,x,x,x,xx,xx,xxxx,hhmmss,x.
4. INST A LLA TION 4-2 0 AL R: Set al ar ms $NXALR,hhmmss.ss,xxx,A,A,c--c*hh<CR><LF> | | | | | | | | | | | +----------------- 6 | | | | +----------------- 5 | | | +-------------------- 4 | | +---------------------- 3 | +------------------------- 2 +--------------------------------- 1 1.
A P-1 M ENU TREE MENU/ESC Key Receive Mode (INS, Auto , Manual) Local Channel ( 490kHz , 4209.5kHz) Auto Print (Off, All , User Select) Rcv Station & Msg User Select Station & Msg NA VTEX W ar.
FURUNO NX-700A/B SP - 1 E5649S01D- M SPECIF ICA TIONS OF NA V TEX RECE IVER NX -7 00A/ B 1 N A VT EX R ECEI VER 1.1 R eceivi ng fr equenc y 518 kHz and 49 0 kHz (or 4209. 5 kH z), recei ve b oth fr equenci es sim ultaneous ly 1.2 M ode of r ecepti on F1B 1.
FURUNO NX-700A/B SP - 2 E5649S01D- M 4 A N TE NNA UNIT 4.1 Anten na type N X-7H: H-fi eld antenna 4.2 Outp ut im pedance 50 ohm s 4.3 Pow er supp ly +7 V to + 9 V (thr u co- ax cab le) 5 INT ERF A CE 5.1 Inp ut dat a IEC6116 2-1, - 2 GGA, GLL, R MC, ZD A, N RQ, NM K, ACK, GNS, VHW , VTG, VB W Output data N RX, ALR 5.
ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9862 -3 NX-700A/NX-700A-HK/NX-700A-R N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 指示部 DISPLAY UNIT NX-700-A/-HK/-R 000-0.
ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9860 -2 NX-700B/NX-700B-HK/NX-700B-R N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 指示部 DISPLAY UNIT NX-700B/HK/R 000-152-663 1 ** 工事材料 INSTALLATION MATERIALS CP08-01861 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1種 SELF-TAPPING SCREW 5X20 SUS304 000-802-081 4 1.
ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9861 -1 NX-7001-AN*/BN*/-R N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 受信部 RECEIVER UNIT NX-7001-* 000-040-345 1 ** 受.
ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9859 -1 NX-7001-AA-*/BA* N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 受信部 RECEIVER UNIT NX-7001-* 000-040-345 1 ** 受.
ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW-X-9852 -0 NX-7H-0-10/-10-HK,NX-7H-0-20/-20-HK N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT ｱﾝﾃﾅ ANTENNA NX-7H* 000-040-2.
CODE NO. 004-514-350 TYPE CP08-01861 略 図 OUTLINE 名 称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -0 INST ALLAT ION MATE RIALS 工事材料表 08AW-X-9401 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1種 SELF-TAPPING SCREW 5X20 SUS304 4 000-802-081 1 CODE NO.
CODE NO. 004-514-530 TYPE CP08-01863 略 図 OUTLINE 名 称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -0 INST ALLAT ION MATE RIALS 工事材料表 08AW-X-9402 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1種 SELF-TAPPING SCREW 5X20 SUS304 4 000-802-081 1 CODE NO.
CODE NO. 004-514-540 TYPE CP08-01864 略 図 OUTLINE 名 称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -0 INST ALLAT ION MATE RIALS 工事材料表 08AW-X-9403 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1種 SELF-TAPPING SCREW 5X20 SUS304 4 000-802-081 1 CODE NO.
CODE NO. TYPE 略 図 OUTLINE 名 称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -1 INST ALLAT ION MATE RIALS 工事材料表 08AW-X-9407 NX-700A/B ｹｰﾌﾞﾙ組品 CABLE ASSY. 04S4168 *10M* 1 選択 TO BE SELECT 000-106-821 1 CODE NO.
CODE NO. 004-514-610 TYPE CP08-01811 略 図 OUTLINE 名 称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCR IPTIONS 1/1 -0 INST ALLAT ION MATE RIALS 工事材料表 08AW-X-9404 絶縁ﾃｰﾌﾟ SELF-BONDING TAPE Uﾃｰﾌﾟ 0.
CODE NO . 004-514-370 TYPE SP08-02101 ITEM NO. NAME OF PART OUTLINE DWG. NO. OR PER SET PER VES SPARE WORK ING QUANTITY REMARKS/CODE NO. BOX NO. P SHIP NO. SPARE PARTS LIST FOR U S E SETS PER VESSEL -1 TYPE NO. 08AW-X-9301 1/1 ﾋｭｰｽﾞ FGMB 125V 2A PBF 1 FUSE 000-157-479 1 1/1 MFR'S NAME FURUNO ELECTRIC CO.
D-1.
Y. Hatai D-2.
D-3.
D-4.
Y. Hatai D-5.
MASS DWG. No. SCALE APPROVED CHECKED DRAWN 6 5 4 3 2 1 D C B A D C B A 名称 NAME TITLE b) パイプのみを使 うとき コンベック ス (現地手 配） コンベッ クス (現地手 配） .
2 4 3 A 1 B C DRAWN CHECKED APPROVED DWG.No. MASS SCALE TITLE NAME 名称 INTERCONNE CTION DIAGRAM 相互結線図 ナブテックス受信機 NAVTEX RECE IVER NX-700A/B 08-001-3157-A *1.
IN-1 INDEX A Alar m mess age ............................................. 2-9 C Co ntr as t ...................................................... 2-1 8 D Da te............................................................ 2-2 1 De fau lt Se tt ings ..
FURUNO EL EC TR IC C O., LT D. 9-5 2 Ashihara-Cho, Nishinomiya City, 662-8580, Hyogo, J apan Tel : + 8 1 798-65-2111 Fax: +8 1 798-65-4 200 P ub NO . DOC-891 Declaration of c o n f o r m i t y We FURUNO ELECTR IC C O.
An important point after buying a device Furuno NX-700B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno NX-700B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno NX-700B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno NX-700B you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno NX-700B will certainly help you make a decision on the purchase.
If you already are a holder of Furuno NX-700B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno NX-700B.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno NX-700B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno NX-700B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
