Instruction/ maintenance manual of the product GP-330B Furuno
Go to page of 28
GPS RECEIVER GP-330B OPERA T OR'S MANU AL www .furuno .co .jp MODEL.
i IMPORT ANT NOTICES • The descriptions in this manual are intended for readers with a solid knowledge of English. • No part of this manual may be copied or reproduce d without written permis sion. • If this manual is lost or worn, contact your dealer a bout replacemen t.
ii The input voltage must be 12 VDC. Any other input voltage will damage the equipment. Always wear safety goggles and a dust mask when installing to avoid personal injury. WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
iii T ABLE OF CONTENTS FORE WORD ..... ..... ..... ....... ..... ..... ....... ..... ..... ....... ..... .... ........ .... ..... ....... ..... . iv SYSTEM CONFIGURATION ..... . ......... .. . ......... .. ........ .......... ......... .. ........ .. .
iv FOREWORD A Word to the Owner of the GP-330B Congratulations on your choice of the FURUNO GP-330B GPS Receiver. We are confident you will see why the FURUNO name has beco me synonymous with qual- ity and reliability. For 60 years FURUNO Electric Company has enjoyed an enviable reputa tion for quality marine ele ctronics equipme nt.
v SYSTEM CONFIGURA TION : Standard supply : Optional supply : Local supply NMEA 2000 NMEA 0183 NavNet 3D Series FI-50 Series Instruments AIS Autopilot Current Indicator ECDIS Remote Display Unit NavNe.
1 1. INST ALLA TION 1.1 Equipmen t List s 1.2 T ools & Materials • Mounting hardware w ith standard 1-14" UNS (Po le/Rail Mount installation) threads • Safety goggles •D u s t m a s k .
2 1.3 Choos ing the Mou ntin g L ocati on For a reliable GPS signal, selecting the best locatio n for the receive r is very impor- tant. It can be mou nted on a pole , rail, or flat surfac e. Choose a loca tion that bal- ances the requirem ents below.
3 1.4 Moun ting 1.4.1 Pole/Rail (Pip e) Mount The nut asse mbly supplied has stand ard 1-14" UNS thread s that can be screwed to a standard marine antenna mount, exten sion pole, or rail-mount bracket. Before beginning the inst allation, plan for s ecuring the pole / rail bracket to the boat and purchase locally all t he necessary ha rdware.
4 5. Remove the protective cap from the GPS connector on the cable. (Sa ve the cap to pr otect the connector , when the receiver is removed.) Plug the cable firmly into the GPS receiver . 6. With the alignment tab on the GPS rece iver facing forward, slide th e captive nut upward and screw it onto the moun t base.
5 7. W rap pipe thread tape around the thre ads of the moun t base two times to seal it tightly to the sur face bracket. 8. Coat the part of the GPS connector show n in the figure on page 4 with silic one sealant. Pass the GPS connector end of the cable up through the hole in the surface br acket.
6 2. WIRING, SETTINGS 2.1 NMEA 2000 ® Connection The LEN (Load Eq uivalency Number) for this equipmen t is 3. 2.1.1 Direct Connection Insert the contact pin (supp lied) into the # 5 socket of th e GPS Receive r connector to activate the term ination resistor .
7 2. 1. 2 Net w or k Co n ne ct io n Drop cab le conn ecti on A drop cable is connected to a backbone cable with T -type connectors*. The back- bone cable is of th e “light” type. Attach a termina tor at the ends o f the backbone cable. Only two term ination resistors a re required on an NMEA 2000 ® network.
8 Connect the GPS Receiver at the la st node in the n etwork. Insert the contact pin (supplied) into the # 5 socket of the GPS Receiver con nector to activat e the termi- nation resistor . 2.1.3 Routing and Connecting the Cable Assembly Route the cable a ssembly to the NM EA 2000 ® device.
9 2.2 NMEA 0183 Co nne c tion Wiring outline Wiring procedure Route the cable ass embly to the displa y . Coil an y excess cable an d secure it with a cable tie to preve nt damage. Con nect the GPS Re ceiver to your NME A 0183 display . Extension cable (MJ-A7SPF/SRMD-100, option) max.
10 2.3 Settings for N avNet vx2 The following items in the NavNet vx2 menu system are applicable to the GP-330B. For details and opera ting procedure, s ee the Installation Manual for your NavNet vx2 mo del. NAV SETUP menu Set POSITION SOU RCE to GPS or A LL.
11 3. MAINTENANCE, T ROUBLESHOOTING 3.1 Ma intenan ce The GP-330B is virtual ly maintenance free . However, it is recomm ended to wipe it with a water-moistened cloth periodica lly to remove accumulated dirt and water de- posits. 3.2 T roublesh ooting If position is not fo und within a reas onable amount o f time, check the following items.
12 4. TECHNICAL INFORMA TION 4.1 NMEA 0183 Sent ence s T ransmitted NMEA 0183 Sentences $GPDTM* Datum Reference $GPGGA* GPS Fix Data $GPGLL* Geographic Position –Latitude / Longitude $GPGSA GNSS DOP.
13 4.2 NMEA 2000 ® PGN Commands T ransmitted NMEA 2000 ® PGNs PGN 059392 ISO Acknowledgmen t PGN 060928 ISO Address Claim PGN 065285 Proprietary: Boot St ate Acknowledgm ent PGN 065287 Proprietary: .
FURUNO GP-330B SP - 1 E4 452S0 1A 080318 SPECIFICA TIONS OF GPS RECEIVE R GP-330B 1 GENERAL 1.1 Receiv i ng freque ncy 1575.42 MHz 1.2 Tracki ng co de C/A code , W AAS 1.3 Number o f chan ne ls GPS: 12 ch an nels parall el , 12 sat ell ites; WAAS: 2 chann els 1.
NAME OUTLINE Q'TY DESCRIPTION/CODE № ＰＡＣＫＩＮＧ ＬＩＳＴ 20BD-X-9851 -1 GP-330B-A 1/1 NAME OUTLINE Q'TY DESCRIPTION/CODE № ユニット UNI T GPS受信機 GPS RECEIVER GP-3 30B 000- 012-5 80-00 1 ﾊﾟｲﾌﾟﾏｳﾝﾄｷｯﾄ PIPE MOUNT KIT.
NAME OUTLINE Q'TY DESCRIPTION/CODE № ＰＡＣＫＩＮＧ Ｌ ＩＳＴ 20BD-X-9852 -1 GP-330B-N 1/1 NAME OUTLINE Q'TY DESCRIPTION/CODE № ユニット UNIT GPS受信機 GPS RECEI VER 1 GP-330B 000-012-580-00 ﾊﾟｲﾌﾟﾏｳﾝﾄｷｯﾄ PIPE MOUNT KIT.
18/Mar/08 R.Esumi D-1.
18/Mar/08 R.Esumi D-2.
18/Mar/08 R.Esumi D-3.
D A B C 23 1 kg SCALE APPROVED CHECKED DRAWN MASS NAME TITLE 名称 DWG.No. REF.No. 相互結線図 INTERCONNE CTION DIAGR AM GP-330B GPS受信機 GPS RECEIVE R C4452-C01- A T.
9-52 Ashihara-cho, Nishinomiya, 662 -8580, J apan Te l : +8 1 (7 9 8) 6 5-2 1 11 Fa x: + 8 1 (7 9 8) 6 5-4 2 00 www.fu runo.co.jp Publication No. DO C-986 Declaration of Conform ity W e FURUNO ELECTRIC CO.
The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 A : MAR 2008 . Printed in USA All rights reserved.
An important point after buying a device Furuno GP-330B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno GP-330B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno GP-330B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno GP-330B you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno GP-330B will certainly help you make a decision on the purchase.
If you already are a holder of Furuno GP-330B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno GP-330B.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno GP-330B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno GP-330B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
