Instruction/ maintenance manual of the product MT108-102 Altinex
Go to page of 13
MULTI-TASKER MANUAL PART NUMBER: 400-0162-002 1-IN, 4-OUT STEREO AUDIO DISTRIBUTION AMPLIFIER CARDS FOR MULTI-TASKER™ USER’S GUIDE MT108-102 is shown above.
MULTI-TASKER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 1.1 GENERAL ................................................... 2 1.2 INSTALLATION .......................................... 2 1.3 CLEANING .........................
MULTI-TASKER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT108-102/(103) Distribution Amplifier. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT108 -102/(103) and to prevent fire and shock hazard.
MULTI-TASKER 3 ABOUT YOUR MT108-102/(103) 2 MT108-102/(103) 1-in 4-out Stereo Audio Distribution Amplifier Cards The MT108-102 and MT108-103 are Stereo, Audio Distribution Amplifier Cards designed for use with the Multi-Tasker system.
MULTI-TASKER 4 DESCRIPTION OF MT108-102/(103) 4 APPLICATION DIAGRAM 5 Application 1.
MULTI-TASKER 5 Application 2 Internal View of the MT108-102/(103) Card.
MULTI-TASKER 6 INSTALLING YOUR MT108-102/(103) 6 Step 1. Slide the MT108-102/(103) into an available slot in the Multi-Tasker™ Basic Enclosure in order to connect to the bus.
MULTI-TASKER 7 Ui = Unit ID (i = # from 0 to 9) ( refer to the MT100-100 user’s guide for explanation) Example: If one MT108-103 card is plugged in slot #2 of unit 3: Sending the command [VERC2U3] , will yield the following feedback from the Multi -Tasker™ MT108- 103 690-0127-007 MT108-103 = card type 690-0127-007 = software version 2.
MULTI-TASKER 8 Example: 1. [ON1G5U1] : Turns ON output 1 for each card in group 5 of unit 1. 2. [ONG5U1] : Turns ON all outputs for each card in group 5 of unit 1. [ON…P]: sets path This command will set the path for the output, but it is not active until the switch command, [S W], is executed.
MULTI-TASKER 9 Example: If 2 cards are in slots 6 and 7 of unit 3: To disable outputs 1 and 2 of card 6 and outputs 3 and 4 of card 7 simultaneously, use the following commands: [OFF12C6U3 P ] [OFF34C7U3 P ] [S W] If "F" is included use the [OFFmCnUi PF ] command or the [OFFmCnUi FP ] command.
MULTI-TASKER 10 14. [G] This command is used to request group data. W ith the command, the user can identify which input or output of a particular group is on.
MULTI-TASKER 11 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found no problems in the supplied MT108-102/(103) ; however, we would like to offer suggestions for the following : 8.1 LED IS NOT LIT Cause 1: Card cage is not plugged in. Solution: Plug card cage in.
MULTI-TASKER 12 8.4 SOUND LEVEL IS LOW Cause 1: The volume levels are inappr opriate. Solution 1: Turn up the source volume. If sound level is still low, see Solution 2. Solution 2: Turn up the destination amplifier volume. If the sound level is still low, see Cause 2.
An important point after buying a device Altinex MT108-102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MT108-102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MT108-102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MT108-102 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MT108-102 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MT108-102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MT108-102.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MT108-102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MT108-102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
