Instruction/ maintenance manual of the product MT107-305 Altinex
Go to page of 11
MULTI -TASKER™ MANUAL PART NUMBER: 400-0353-001 8 BNC OUTPUTS 450MHz VIDEO, SYNC/VIDEO, SYNC FOR MULTI-TASKER™ MATRIX SWITCHER USER’S GUIDE MT107-301/305/306.
MULTI -TASKER™ 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 GENERAL ................................ ......................... 2 INSTALLATION ................................ ................. 2 CLEANING ..................
MULTI -TASKER™ 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT107-301/305/306 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT107-301/305/306 and to prevent fire and shock hazard.
MULTI -TASKER™ 3 ABOUT YOUR MT107-301/305/306 2 MT107–301/305/306 8 BNC OUTPUTS 450MHz The MT107-301, MT107-305 and MT107-306 are 8 BNC Output expansion cards for use with the MT107-100 64X64 Matrix Engine. All three cards are designed to work with signal resolutions from VGA through UXGA.
MULTI -TASKER™ 4 PRODUCT DESCRIPTION 4.
MULTI -TASKER™ 5 APPLICATION DIAGRAM 5 DIAGRAM 1 : TYPICAL CONFIGURATION.
MULTI -TASKER™ 6 DIAGRAM 2 INTERNAL VIEW MT107-301 MT107-301, 8 BNC OUTPUTS 450MHz, VIDEO/SYNC OUT1 OUT2 OUT3 OUT4 OUT5 VIDEO SYNC VIDEO VIDEO VIDEO SYNC VIDEO SYNC SYNC OUT7 OUT6 OUT8 SIGNAL DETECT.
MULTI -TASKER™ 7 DIAGRAM 3 INTERNAL VIEW MT107-305 MT107-305, 8 BNC OUTPUTS 450MHz, VIDEO OUT1 OUT2 OUT3 OUT4 OUT5 OUT7 OUT6 OUT8 SIGNAL DETECT IN1 IN2 IN3 IN4 IN5 INPUTS IN6 IN7 IN8 40 PIN IDC FROM.
MULTI -TASKER™ 8 DIAGRAM 4 INTERNAL VIEW MT107-306 MT107-306, 8 BNC OUTPUTS, SYNC OUT1 OUT2 OUT3 OUT4 OUT5 OUT7 OUT6 OUT8 SIGNAL DETECT IN1 IN2 IN3 IN4 IN5 INPUTS IN6 IN7 IN8 40 PIN IDC FROM MT107-1.
MULTI -TASKER™ 9 INSTALLING YOUR MT107-301/305/306 6 Step 1. Locate the MT107-100 currently installed in the Multi -Tasker™. Ensure there are enough empty slots in the enclosure to allow for the one or more MT107-301/305/306 's to be installed.
MULTI -TASKER™ 10 8.2 NO DISPLAY Cause 1: The source has a problem. Solution: Check the source and make sure that there is a signal present and all source connections are correct. If the source is working and there is still no display, see Cause 2. Cause 2: The output signal is not detected.
An important point after buying a device Altinex MT107-305 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MT107-305 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MT107-305 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MT107-305 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MT107-305 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MT107-305, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MT107-305.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MT107-305. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MT107-305 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
