Instruction/ maintenance manual of the product MT106-101 Altinex
Go to page of 16
MULTI-TASKER MANUAL PART NUMBER: 400-0097-004 MT106-101 SCAN DOUBLER CARD FOR MULTI- TASKER USER’S GUIDE TM.
MULTI-TASKER 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS .............. 2 1.1 GENERAL ................................................... 2 1.2 INSTALLATION .......................................... 2 1.3 CLEANING .........................
MULTI-TASKER 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your MT106 -101 . Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT106 -101 and to prevent fire and shock hazard.
MULTI-TASKER 3 ABOUT YOUR MT106-101 2 MT106-101 Scan Doubler Card The MT106-101 is a Scan Doubler Card designed for use with the Multi-Tasker system. When installed in a Multi-Tasker enclosure, this card allows the connection of an S-Video or one of three Composite Video (NTSC/PAL) sources to a data- grade monitor or projector.
MULTI-TASKER 4 DESCRIPTION OF MT106-101 4.
MULTI-TASKER 5 APPLICATION DIAGRAM 5 Application 1 Application 2.
MULTI-TASKER 6 Application 2: Internal View of MT106-101.
MULTI-TASKER 7 INSTALLING YOUR MT106-101 6 Step 1. Slide the MT106-101 into an available slot in the Multi-Tasker™ Basic Enclosure in order to connect to the bus.
MULTI-TASKER 8 Ui = Unit ID ( i = # from 0 to 9) ( refer to the MT100-100 user’s guide for explanation) Example: If one Scan Doubler Card is in slot #2 of unit 3. Send the command [VERC2U3] , and the Multi -Tasker™ Basic Enclosure will return the following: MT106- 101 690-0155-003 MT106-101 = card type 690-0155-003 = software version 2.
MULTI-TASKER 9 STATUS Command MIN Value MAX Value Default Value [ HPOS ] 0 20 5 [ VPOS ] 0 20 19 [ HSIZE ] 0 20 19 [ VSIZE ] 0 20 19 [ BRIG ] 0 20 10 [ SHARP ] 032 [ COLOR ] 0 10 10 [ HUE ] 0 10 10 Attempting to cycle past the minimum or maximum values will have no effect on the attribute's value.
MULTI-TASKER 10 This command selects the Vertical Position adjustment and makes it the active control. It also returns the status of the current Vertical Position.
MULTI-TASKER 11 15. [BRIGnCi] - Set Value This command selects the Brightness adjustment and makes it the active control. It also returns the status of the current Brightness level. As the active control, it may be adjusted using the [ + ] and [ - ] commands.
MULTI-TASKER 12 20. [COLORCi] - Status/Adjust The COLOR command, with no value, selects the Color adjustment and makes it the active control. It is also used to return the status of the current Color level. As the active control, it may be adjusted using the [ + ] and [ - ] commands.
MULTI-TASKER 13 25. [CLR] This command clears the members for a single group or for all nine groups. Command Format: [CLRGkUi] Gk = group number (k = # from 1-9) Ui = unit number (i = # from 0-9) Example: 1) To clear group #1, send the [CLRG1U1] command.
MULTI-TASKER 14 TROUBLESHOOTING GUIDE 8 We have carefully tested and have found no problems in the supplied MT106-101 ; however, we would like to offer suggestions for the following: • 8.1 LED IS NOT LIT • 8.2 LED IS BLINKING RED • 8.3 NO DISPLAY 8.
MULTI-TASKER 15 ALTINEX POLICY 9 9.1 LIMITED WARRANTY/RETURN POLICY Please see the Altinex website at www.altinex.com for details on warranty and return policy. 9.2 CONTACT INFORMATION ALTINEX, INC 592 Apollo street Brea, CA 92821 USA TEL: 714 990-2300 TOLL FREE: 1-800-ALTINEX WEB: www.
An important point after buying a device Altinex MT106-101 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Altinex MT106-101 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Altinex MT106-101 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Altinex MT106-101 you will learn all the available features of the product, as well as information on its operation. The information that you get Altinex MT106-101 will certainly help you make a decision on the purchase.
If you already are a holder of Altinex MT106-101, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Altinex MT106-101.
However, one of the most important roles played by the user manual is to help in solving problems with Altinex MT106-101. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Altinex MT106-101 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
