Instruction/ maintenance manual of the product SP-20ABE Furman Sound
Go to page of 12
SP-20AB MANUAL 0008A 960026-832.
SP-20AB MANUAL Important Note: T o obtain best results from this Furman Sound electronic product, please be sure to read this manual carefully before using it. Please fi ll out and return the W arranty Registration Card immediately to obtain full protection under the terms of the Limited W arranty , in case your ownership documents are lost.
SP-20AB MANUAL The SP-20AB’ s compact size and 20 watts per channel make it ideal for modu lar use in large commercial installations with multiple small speakers.
SP-20AB MANUAL Descriptions of Controls Front Panel INPUT LEVEL: The Input Level control can be adjusted for maximum signal to noise and minimum clipping. The Input Level control is stereo - it af fects both left and right channels simultaneously and affects all outputs.
SP-20AB MANUAL contact between chassis, as in a rack with metal rails. Sliding the Ground Lift switch up completely isolates all signal grounds from the chassis, breaking any ground loops. The chassis always remains con nected to the ground pin on the AC cord for safety and to provide shielding against RF interference.
SP-20AB MANUAL two top (red) terminals. In this case, nothing should be connected to the bottom (black) terminals. Positive polarity will be on the left channel (red) terminal. SA TELLITE/REMOTE OUTPUT : This output is a single male XLR connector containing both the left and right channel outputs.
SP-20AB MANUAL Installation For installation as a free-standing unit, attach the four adhesive rubber feet supplied with the SP-20AB to the bottom of its case. With either the HRKIT -1 or the HRKIT -2 adaptor kits the SP-20AB may be mounted in standard 19” equipment racks.
SP-20AB MANUAL Limited W arranty Furman Sound, Inc., having its principal place of business at 1997 South McDowell Blvd., Petaluma, CA 94954 (“Manufacturer”) warrants its SP-20AB (the “Product.
SP-20AB MANUAL 8 Service Before returning any equipment for repair , please be sure that it is adequate ly packed and cushioned against damage in shipment, and that it is insured. We suggest that you save the original packaging and use it to ship the product for servicing.
SP-20AB MANUAL SPECIFICA TIONS OUTPUTS: Power: 20 W atts per channel, stereo, into either 4 Ohms or 8 Ohms, or 40 W atts mono into 8 Ohms, 20 Hz to 20 KHz Connectors: Speakers: 5-way binding posts (accommodates dual banana plugs, spade lugs, bare wires, etc.
SP-20AB MANUAL.
SP-20AB MANUAL 7 Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www .furmansound.
An important point after buying a device Furman Sound SP-20ABE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furman Sound SP-20ABE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furman Sound SP-20ABE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furman Sound SP-20ABE you will learn all the available features of the product, as well as information on its operation. The information that you get Furman Sound SP-20ABE will certainly help you make a decision on the purchase.
If you already are a holder of Furman Sound SP-20ABE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furman Sound SP-20ABE.
However, one of the most important roles played by the user manual is to help in solving problems with Furman Sound SP-20ABE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furman Sound SP-20ABE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
