Instruction/ maintenance manual of the product MBP5130/F7 FUNAI
Go to page of 52
Owner’s Man ual MBP5130/F7 Blu-ray Disc / DVD Player © 2010 F unai Electric Co., Ltd . E5S20UD_MBP5130_F7_OM_EN.indd 1 E5S20UD_MBP5130_F7_OM_EN.indd 1 2010/10/01 11:59:50 2010/10/01 11:59:50.
2 INTRODUCTION Safety Instructions The model and serial numbers of this unit may be found on the cabinet. Model No.: Y ou should record and r etain those numbers for future refere nce. Serial No.: W ARNING: TO REDUCE THE RISK OF FIRE OR ELEC TRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS T O RAIN OR MOISTURE.
3 RADIO- T V INTERFERENCE This equipment has been tested and f ound to comply with the limits for a Class B digital devic e, pursuant to P ar t 15 of the FCC Rules . These limits are designed to pr ovide reasonable protection against harmful interference in a residential installation.
4 Note about Recycling • This unit’ s pack aging materials are r ecyclable and can be reused. Please dispose of any materials in acc ordance with your local recycling regulations . • Batteries should never be thro wn away or incinerated but disposed of in accordance with y our local regulations concerning chemical wastes .
5 C ONTENTS INTRODUC TION................................................................ 2 Safety Instructions ................................................................... 2 Supplied Accessories ................................................
6 T rademark Information HDMI, the HDMI Logo , and High-Definition Multimedia Interface are trademarks or register ed trademarks of HDMI Licensing LL C in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
7 1. AC po wer cor d 2. LAN terminal 3. HDMI OUT jack 4. A UDIO OUT jacks 5. DIGIT AL OUT (C OAXIAL) jack 6. Wir eless LAN (Internal) 7. VIDEO OUT jack Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge ma y cause permanent damage to the unit.
8 Remote Con trol (*) The unit can also be turned on by pressing these buttons. 1. ST ANDB Y/ON y button • Press t o turn on the unit, or to turn the unit into the standby mode. (T o completely turn off the unit, you must unplug the AC po wer cord.) 2.
9 24. MODE button • During BD or DVD or A VCHD files playback, press to display the setting f or the rapid playback and the picture adjustment. • During BD , DVD and CD playback, press to display the setting for the virtual surround.
10 C ONNECTIONS Connection to the TV HDMI Video / A udio Connection (Suppor ts up to 1080i / 1080p , 1080p24 resolution.) L R AUDIO OUT VIDEO OUT HDMIOUT LAN Wireless LAN COAXIAL HDMI IN HDMI cable(not supplied) Y our T V HDMIOUT • No analog audio connection required.
11 Connection to an Audio S ystem • When you change the connections, all devices should be turned off . • Refer to the manual acc ompanying external devices for more inf ormation. 2-Channel Analog Audio C onnection Digital Audio C onnection T o set up “Digital Out” , refer to page 32.
12 Connection to the Network By connecting this unit to the Internet, you can access Netflix, Blockbuster and VUDU services and applications, BD-Live featur es on a Blu-ray Disc and per form network update . - F or more information about software update, r efer to “Network Update” on page 44.
13 Finding the Video Channel on Y our T V After you hav e completed all the connections, you must find the corr ect video channel (ex ternal input channel) on your T V . 1 After you hav e made all the necessary connections, press [ST ANDBY/ON y ] to turn on the unit .
14 PLA Y BACK Information on Pla yback Before y ou star t playing back a disc, r ead the following inf ormation. Playable Discs and F iles Playable discs Blu-ray Disc - BD-video (single / dual layer) - BD-RE ver . 2.1 (single / dual layer) (Recorded in BDMV f ormat) - BD-R ver .
15 Region Codes This unit has been designed to play back BD-video with region “ A ” and DVD-video with region “1” or “ ALL ” . Y ou cannot play back BD-video or DVD- video that are labeled for other r egions. Look f or the symbols on your BD-video or DVD-video.
16 Reading the SD Memor y Card Y ou can play back the A VCHD / WM A / JPEG files in an SD Memor y Card . With the SD Memory Card, you can also enjo y the following functions.
17 • In the “Disc” mode, the resume information will be cleared when; - [ C (stop)] is pressed while in the Resume-On- Stop mode. - the parental level is changed . - the disc tray is opened. • In the “SD Card” mode, the resume information will be cleared when; - [ C (stop)] is pressed while in the Resume-On- Stop mode.
18 3. Press [ C (stop)] to stop pla yback. It is recommended that files to be pla yed back in this unit are recor ded under the following specifications: <Windo ws Media™ A udio> • Sampling frequency : 32 kHz, 44.
19 F ast Forward / F ast Reverse 1. During playback, press [ D (forward)] repeatedly f or fast forward. During playback, press [ E (re verse)] repeatedly f or fast reverse . Every time you pr ess [ D (forward)] or [ E (rev erse)], the playback speed will change.
20 2 audio CD: “CD-DA ” will be displayed. WMA/JPEG: Current Disc , SD Memor y Card, or f older name will be displayed . 3 T rack / F older / File list: T rack / F older / F ile list in the origin.
21 • T o repeat the current track / file in the random selection, press [REPEA T ] r epeatedly until “ Track” appears during playback. T o repeat the entire random selection press [REPEA T ] repeatedly until “ All” appears during playback. • Playback from a desired track / file is not available during random playback.
22 PIP (BONUSVIEW ) Setting Some BD-videos have the PIP function which enables you to display the sec ondar y video in the primary video. Y ou can call up the secondar y video by pressing [MODE] whenever the sc ene contains the secondary video. 1. During playback, press [MODE] repeat edly until the PIP function appears.
23 Search Using [ H / G (skip)] 1. During playback, press [ G (skip)] to mov e to the next track / title / chapter / file. P ress it repeatedly to skip to subsequent tracks . Press [ H (skip)] once to go back to the beginning of the current track.
24 Note • Some discs will only allow you to change the subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU / MENU] to display the disc menu or pop-up menu. • If 4- digit-language code appears in the subtitle menu, ref er to “Language Code List ” on page 48.
25 3 Press [RETURN] to e xit. • Y ou can also set “BD Audio Mode” from the setup menu. Refer to page 31. Note • In “Mix Audio Output” mode, if there is no secondary and interactive audio, the audio will be output as “HD Audio Output ” mode.
26 • Y ou cannot add movies or T V episodes to your instant Queue on this unit. • Y ou can remove mo vies or T V episodes from the instant Queue on this unit. Note • The picture quality differs depending on the speed of your Internet connection at the time of loading.
27 3. Use [ K / L / s / B ] to select the desired title, then press [ OK]. • Title details screen of the selected title will appear . 4. Use [ s / B ] to select “Rent” or “Buy ” , then press [ OK]. • Checkout screen will appear . 5. Use [ s / B ] to select “Submit Order” , then press [ OK].
28 Guide to VUDU Menu Screen App Home Screen App Home screen is the entry point to VUDU applications including VUDU movies. T o call up the screen, press [RED] while opening scr een is displayed . Most Popular Newest Browse by Genre My Fa vorites Most Popular 1 2 3 1.
29 W atching Rented or Purchased VUDU Movies / TV Episodes 1. Follow steps 1 to 2 in “Renting or Purchasing VUDU Movies / T V Episodes” on page 28. 2. Use [ s / B ] to select “My Vudu ” , then press [OK ] . 3. Use [ s / B ] to select “My Rentals” , “My Movies” or “My TV Shows ” , then press [OK].
30 Custom “ Custom ” menu contains all the setting items. 1. In stop mode, press [SETUP]. 2. Use [ K / L ] to select , then press [OK]. 3. Use [ K / L ] to select your desired setting category , then press [ OK]. : Language : Video : Audio : Par ental : Others • F or “Par ental” menu, follo w the procedure on page 35.
31 Note for “HDMI V ideo Resolution ” • Even if you set “HDMI Video Resolution ” setting to “ Auto” , when this unit is connected to a DVI compatible display devices with an HDMI-DVI cable, 480p signal will be output. • Video and audio signals ma y be distorted temporarily when switching to / fr om the HDMI output mode.
32 HDMI Audio Out Setting When using HDMI connections make “HDMI Audio Out” setting in “ Audio ” menu according to the specifications of the device to be connected. Ref er to page 31. Normally , set it to “HDMI Multi(Normal)” so that the unit automatically picks and outputs the best audio format suited t o your connected device.
33 Speaker Setting (A vailable when y ou have HDMI cable c onnected to HDMI OUT jack) This unit allows y ou to enjoy multi-channel surround sound such as 7.1-channel / 5.1- channel surround. T o make the most of its feature , set up your speakers appropriately by r eferring to the f ollowing table.
34 Menu Setting items Descriptions Channel Lev el T ests or sets the volume for each speaker . T est T one: “ T est T one” is the test tone which can be output from the speakers so you can adjust the volume f or each speaker . Select “Off ” to deac tivate “ T est T one” .
35 Par ental Ratings control allows y ou to set a limit, which prevents your childr en from viewing inappropriate materials. Playback will be st opped if the ratings exceed the levels y ou set, and it will require you to ent er a password bef ore playing back the disc.
36 Others Others Angle Icon On fun-Link (HDMI CEC) O Mode Select Disc Network Connection Software Update • T o select the setting items and options, refer t o “ Custom ” on page 30. • “ Quick ” menu consists of the setting menus frequently used , and they are accompanied with .
37 Setting items Options / Descriptions Network Connection • Refer to page 39 for more information. Connection T est Perform a network connection test. After you change IP address or DNS setting, always perform this test. Network Selection Wired* Easy* If you select “Easy ” , connection test will automatically start.
38 Setting items Options / Descriptions Software Update Allows you to update this unit’ s firmware . Refer to page 43. Current V ersion Indicates the current firmware v ersion.
39 Network C onnection [SETUP] ”Others" “Network Connection” Set up network connection settings in order to use BD-Live, Netflix / Blockbuster / VUDU or network update function.
40 T o set the network setting to “Custom ”(wired), follow the f ollowing procedure . 1. Follow steps 1 to 2 in “Easy ( Wir ed)” on page 39. 2. Use [ K / L ] to select “ Custom ” , then press [OK]. - Setting menu of “C ustom ”(wired) will be displayed .
41 a) Use [ K / L ] to select “Proxy Address ” , then press [OK]. Pro xy address setting screen will appear . Enter pro xy address. • The keyboard scr een will appear . Others _ Proxy Address abc de f gh i j 1 234 56 78 90 uv wxy z . - _ OK kl m n o p qrs t Clear All Clear a/A/@ OK [ K / L / s / B ] : Move the highlight.
42 <Wir eless Router> In order to use a wireless network, you must set up the connection to the wireless router . Y ou must set the wireless router to infrastructure mode. Ref er to page 13 for details. Find wireless netw ork Search for wireless netw orks automatically and select the wireless network name (SSID) from the list.
43 2. Use [ K / L ] to select “Manually enter your SSID” , then press [OK]. • Wireless Rout er Name (SSID) entry screen will appear . Enter the wireless network name (SSID) using cursor buttons, number butt ons and color key , then press [YELLOW ].
44 The indicators sho w the progress status ... (Success) PLA Y indicator lights up. STOP PLA Y STANDBY/ON (Error)* PLA Y and ST ANDBY/ON indicators flash. STOP PLA Y STANDBY/ON * If the indicator show s Error ... 1) Unplug the AC pow er cord for about 10 seconds, re-plug AC pow er cord and then turn the unit on.
45 O THERS T roubleshooting If the unit does not per form properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem Solution No power . - Check if the AC cor d is properly connected. - Unplug the AC cor d once, and wait for 5-10 sec onds and then plug it in again.
46 Problem Solution The unit cannot read BD / DVD/ CD . - Condensation? (Let sit 1 or 2 hours) - Check if the disc is compatible with this unit.(Refer to page 14.) - Wipe the dirt off the disc or replace the disc. Angle does not switch. - The angle cannot be switched f or BD / DVD which do not contain multiple angles.
47 Problem Solution Cannot rent or buy movies / T V episodes on VUDU. - Y ou need to ac tivate the VUDU account. (Ref er to page 27) - Log into y our account at http://my .vudu.com and check your payment information. Note • Some functions are not available in specific modes, but this is not a malfunction.
48 Language Code List Language Code Language C ode Language Code Language Code A-B French [FRE] 5264 Macedonian 5957 Siswat 6565 Abkhazian 4748 Frisian 5271 Malagasy 5953 Slovak [SL O] 6557 Afar 4747 .
49 Specifications General Signal system NTSC color Po wer requirements 120 V A C, 60 Hz Po wer consumption 16 W (standby: 0.5 W ) Dimensions (width x height x depth) 14.
50 ESP AÑOL Discos Reproducibles Este aparato es compatible con la r eproducción de los siguientes discos y archiv os. Discos y Archiv os Reproducibles Discos repr oducibles Discos Blu-ray - BD-vídeo (capa simple / doble) - BD-RE ver . 2.1 (capa simple / doble) (Grabado en format o BDMV ) - BD-R ver .
51 Reproducción Dir ecta 1. Presione [ OPEN/CL OSE A ] para abrir la bandeja de discos e insertar su disco con el rótulo apuntando hacia arriba. Pr esione de nuevo [ OPEN/CL OSE A ] para cerr ar la bandeja de discos. • Asegúrese de que el disco sea c ompatible con este aparato .
LIMITED W ARR ANTY FUNAI CORP . will repair this product, free of charge in the USA in the ev ent of defect in materials or workmanship as follows: DURA TION: P ARTS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year fr om the date of original retail pur chase.
An important point after buying a device FUNAI MBP5130/F7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought FUNAI MBP5130/F7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data FUNAI MBP5130/F7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, FUNAI MBP5130/F7 you will learn all the available features of the product, as well as information on its operation. The information that you get FUNAI MBP5130/F7 will certainly help you make a decision on the purchase.
If you already are a holder of FUNAI MBP5130/F7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime FUNAI MBP5130/F7.
However, one of the most important roles played by the user manual is to help in solving problems with FUNAI MBP5130/F7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device FUNAI MBP5130/F7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
