Instruction/ maintenance manual of the product LT8-M40BB Funai
Go to page of 28
2 EN PRECAUTIO NS POWER SUPPLY The main power supply is enga ged when the main plug is plugged in a 220-240 V ~ , 50 Hz AC outlet. To operate the unit, press [ Q (standby -on)] to turn on the unit. WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS .
3 EN INTRODUCTION A Note about Recycling Following information is only for E U-member states: Following information is only valid EU-member States: Disposal of batteries and/or accumulators Features .
4 EN Contents PRECAUTIONS .................................................................. 2 INTRODUCTION .................................... ............................. 3 A Note about Recycling .................................................. 3 Features .
5 EN THINGS TO DO FOR THE FIRST TIME Attaching th e Base Y ou must attach the base t o the unit to have it as a table top unit . Be sure th e front a nd rear o f th e base match the proper direction. To remove the base from this unit U nscrew the Phillips pan screws on step 3.
6 EN OPERATING CONTROLS AND FUNCTI ONS All operations described are base d on the use of the remote control. Some operat ions can be carried out using the bu ttons on th e control panel. Control Panel 1. Q (s tandby-on) (p . 8) Pr ess to turn on or off (standby ) the unit.
7 EN Rear Panel 26. (Aerial) input ja ck (p. 8) Connect an RF coaxial cable (not supplied) to an anten na or RF output jack of a cable system. 27. PC -IN (RGB) input j ack (p. 10) Connect a VGA cable (not su pplied) to the monitor jack of a PC. 28. HDM I (HDMI 1 / HDMI 2 / HDMI 3) input jack (p.
8 EN PREPARA TION FOR USE Installing the Batteries 1) Open the battery compartment cover . 2) Insert “R6/AA, 1.5V” penlight batteries into battery compartment in the direction as indicated by the polarity (+/–) markings. Batteries installed with incorrect polarity may damage the remote unit.
9 EN [COMPONENT CONNECTION] RCA component video co nnection offers better picture quality. 1) Connect the component video output jack (Y, Pb, Pr) of y our video device and the COMPON ENT vide o (Y, Pb, Pr) input jack of this unit. U se an R CA component video cable (not supplied).
10 EN [PC CONNECTION] If you connect this unit and your PC, you can use this unit as a computer mo nitor. 1) Connect the moni tor jack of your PC and the PC-IN (RGB) jack of this unit. Use a V GA cable with ferrite core (not supplied). 2) Connect the audio line out ja ck of your PC and the PC-IN (AUDIO) jack of this unit.
11 EN SETUP FOR USE Initial Setting You need to set the followings to use the unit appropriately for the first time you turn on the unit . 1) Pre s s [ Q (standby-o n)] to turn on the unit. • “Initial Setup ” lan guage menu will appear . 2) Pre s s [ K / L ] repeatedly to select the menu language y ou want, then press [OK] .
12 EN OPERATIONS Watching a TV Programme To select a cha nnel Press [PROG. K / L ] (control panel) or [ / ] (remote control) repeatedly to select your desired channel. or Press [the Number button s] to enter a channel number then [OK] for quicker access.
13 EN Sound Select 1) Pre s s [SOUND] to display the curr ently selected audio language and the number of available languages. 2) Pre s s [SOUND] repeatedly to cycle through the available audio languages. 1) Pre s s [SOUND] to display the currently selected audio mode.
14 EN EPG (Electronic Programme Guide) You can easily find a channel or see the detailed chann el information. EPG gives you sche duled information of the TV programmes. 1) Pre s s [GUIDE] . • E PG will appear. 2) Pre s s [ K / L ] to select a channel, then press [ 1 ] .
15 EN Changing the TV Screen Display Mode You can select your favourite TV screen size. Press [ASPEC T] repeatedly to switch the TV screen displa y mode. For SD (Standard Definition) video signal “Auto” Selects the TV screen display mode automatically.
16 EN OTHER SETTINGS Picture Adjustment You can adjust the pi cture settings according to your personal preference. These settings are automatically stored afte r exiting the picture menu. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Pictur e”, then pr ess [OK] .
17 EN Advanced Picture Adjustment You can adjust the detailed pict ure settings acco rding to your personal preference. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Pictur e”, then pr ess [OK] . 3) Pre s s [ K / L ] to select “F eatures ”, then press [OK] .
18 EN PC Settings You can adjust the PC screen posi tion, clock and phase. Make sure your PC is connected. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Pictur e”, then pr ess [OK] . 3) Pre s s [ K / L ] to select “PC Settings ”, then pr ess [OK] .
19 EN “Auto Volume Control” You can set to keep a constant lo udn ess differential between the TV commercials and the programs. 3) Pre s s [ K / L ] to select “ Auto V olume Control ”. 4) Pre s s [ 0 / 1 ] to select the setti ng (“On, Off ”) you want.
20 EN Audio Language Selection You can select the main language. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV”, then press [OK] . “Audio Languag e” 3) Pre s s [ K / L ] to select “ A udio Language”. 4) Pre s s [ 0 / 1 ] to select the language you want.
21 EN Analogue Manual Scan You can adjust an a nalogue ch annel indi vidually. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre s s [ K / L ] to select “Manual Scan (Analogue)”, then press [OK] .
22 EN Channel Skip When using [ / ] , the channel you selected will be skipped. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre s s [ K / L ] to select “Channel Skip ”, then press [OK] .
23 EN Channel Edit You can ed it channel informa tion. 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre s s [ K / L ] to select “Channel Edit”, then press [OK] .
24 EN Fine Tune 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “TV”, then press [OK] . 3) Pre s s [ K / L ] to select “Channel”, then press [OK] . 4) Pre ss [ K / L ] to select “Fine T une”, then pr ess [OK] . • “Channel List” will appear .
25 EN Subtitle Settings 1) Pre s s [MENU] to display the menu. 2) Pre s s [ K / L ] to select “Setup ”, then press [OK] . 3) Pre s s [ K / L ] to select “S ubtitle ”, then press [OK ] . • “Subtitle ” menu will appear . “Subtitle(Anal ogue)” 4) Pre s s [ K / L ] to select “S ubtitle(Analogue)”.
26 EN C.I. (Common Interface) This unit is equipped with a C.I. slot. You can enjoy additional services with this func tion, for example Pay TV. The access restrictions menu will appear on the TV screen when a CI module is installed. 1) T urn off the unit and unplug from an AC outlet.
27 EN “Maturity Rat ing” You can set the parental rating to avoid watching an inappropriate programme for your children. 4) Pre ss [ K / L ] to select “Maturity Rating”, then press [OK] . 5) Pre ss [ K / L ] to select “Par ental Rating”. 6) Pre s s [ 0 / 1 ] to select the age restriction.
28 EN MAINTENANCE Panel Cleaning • If the LCD panel should require c leanin g, wipe it with a cotton or soft cloth. Before cleaning the panel, disconnect the power cord. Servicing • Should your unit become inoperative, do not try to correct the problem by yourself.
29 EN SPECIFICATIONS General Specifications Other Specifications • Designs and specifications are subjec t to change without noti ce and without our leg al obligation. DECLARATION OF CONFORMITY This product com plies with the requ irement of the related directives.
An important point after buying a device Funai LT8-M40BB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Funai LT8-M40BB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Funai LT8-M40BB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Funai LT8-M40BB you will learn all the available features of the product, as well as information on its operation. The information that you get Funai LT8-M40BB will certainly help you make a decision on the purchase.
If you already are a holder of Funai LT8-M40BB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Funai LT8-M40BB.
However, one of the most important roles played by the user manual is to help in solving problems with Funai LT8-M40BB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Funai LT8-M40BB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
