Instruction/ maintenance manual of the product TSC SK-TSC-1125S Fujitsu
Go to page of 19
Fujitsu Microelectronics Europe FMEMCU-UG-010003-11 User Guide TSC FMA1125 TOUCH SENSOR CONTROLLER SK-TSC-1125S QUICK START GUIDE.
SK-TSC-1125S User Guide - 2 - © Fujitsu Microelectronics Europe GmbH Revision History Date Issue 2009-11-11 V1.0, CHa, first official version 2009-12-15 V1.1, CHa, disclaimer updated, some corrections This document contains 19 pages NOTE: The FMA1125 touch sensor controller is developed and owned by ATLab Inc.
SK-TSC-1125S User Guide © Fujitsu Microelectronics Europe GmbH - 3 - Warranty and Disclaimer The use of the deliverables (e.g. soft ware, application examples, target boards, evaluatio n boards, starter kits, schematics, engineering sampl es of IC’s etc.
SK-TSC-1125S User Guide - 4 - © Fujitsu Microelectronics Europe GmbH 0 Contents REVISION HISTORY .............................................................................................................. 2 WARRANTY AND DISCLAIMER ................
SK-TSC-1125S User Guide © Fujitsu Microelectronics Europe GmbH - 5 - 1 Overview 1.1 Abstract The SK-TSC-1125S Starter Kit allows easy evaluation of the FMA1125 Touch Sensor Controller.
SK-TSC-1125S User Guide - 6 - © Fujitsu Microelectronics Europe GmbH 1.2 Features < FMA1125DC-24S Touch Sensor Controller (SSOP24 package) with 4-8 touch input channels and 4-8 digital I/Os (4 pin.
SK-TSC-1125S User Guide © Fujitsu Microelectronics Europe GmbH - 7 - 2 Installation 2.1 Setup (Starter Kit Hardware) Carefully remove the PCBs from the shipping carton. Please follow the steps below to assemble the Starter Kit: 1. Connect the ribbon cable end with the pull relief to X1 on the ADA-16FX-TSC-LCD.
SK-TSC-1125S User Guide - 8 - © Fujitsu Microelectronics Europe GmbH 2.2 Setup (PC Software) The installation of the USB driver is described in the SK-16FX-EUROSCOPE documentation. In case the USB connection is only used as power supply, the driver installation is optional.
SK-TSC-1125S User Guide Figure 2: System set-up (LCD and SK-16FX EUROSCOPE not included!) © Fujitsu Microelectronics Europe GmbH - 9 -.
SK-TSC-1125S User Guide - 10 - © Fujitsu Microelectronics Europe GmbH 2.4 Jumper settings 2.4.1 SK-TSC-1125S-TB Jumper Setting Description Open I2C SCL line not connected to Pull-up resistor JP1 (SCL.
SK-TSC-1125S User Guide © Fujitsu Microelectronics Europe Gmb H - 11 - 2.4.2 ADA-16FX-TSC-LCD Jumper Setting Description Open I2C SCL line not connected to Pull-up resistor JP2 (SCL pull-up ) Closed .
SK-TSC-1125S User Guide - 12 - © Fujitsu Microelectronics Europe GmbH 2.5 I2C header (X1) pi nout (ADA-16FX-TSC-LCD) X5 Pin Name Connected to Descripton 1 SCL JP6, X3 Pin 1 I2C Serial Clock Line 2 SD.
SK-TSC-1125S User Guide © Fujitsu Microelectronics Europe Gmb H - 13 - 3 Basic Tuning Process using the Command Line Interface and a PC Terminal Program The SK-TSC-1125S kit can also be used together.
SK-TSC-1125S User Guide - 14 - © Fujitsu Microelectronics Europe GmbH Typically, to start tuning a new application, first of all the Reference Delay and Alpha settings need to be set. For this, the ‘mon2’ monitor mode can help to directly show the effect of changed settings.
SK-TSC-1125S User Guide Figure 3: Monitor Mode (‚mon2’) In mon2 mode, channels with active touch status will be shown with stars ‘*’, those in inactive state are shown with lines ‘|’.
SK-TSC-1125S User Guide - 16 - © Fujitsu Microelectronics Europe GmbH 4 Related Products < SK-16FX-EUROSCOPE Evaluation board for the 16FX Family MB96340 Series MCU < SK-TSC-1127-SB Starter Kit.
SK-TSC-1125S User Guide © Fujitsu Microelectronics Europe Gmb H - 17 - 5 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Touch sensor controllers: http://www.
SK-TSC-1125S User Guide - 18 - © Fujitsu Microelectronics Europe GmbH 6 China RoHS regulation This starter kit is compliant with China RoHS.
SK-TSC-1125S User Guide 7 Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück.
An important point after buying a device Fujitsu TSC SK-TSC-1125S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu TSC SK-TSC-1125S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu TSC SK-TSC-1125S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu TSC SK-TSC-1125S you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu TSC SK-TSC-1125S will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu TSC SK-TSC-1125S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu TSC SK-TSC-1125S.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu TSC SK-TSC-1125S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu TSC SK-TSC-1125S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
